This study investigated the physicochemical properties and acceptability of yellow layer cake prepared using various levels of wet-milled rice flour (RF). RF was used to substitute 0% (control group), 15% (RF-15 group), 30% (RF-30 group) and 45% (RF-45 group) of wheat flour (WF) to manufacture yellow layer cakes. The substitution of WF with RF showed no significant effect on the pH but decreased the specific gravity and viscosity of the batter. Baking loss rates ranged from 4.65% to 5.03%, showing no significant difference among samples. In the color measurement, the experimental groups showed higher redness (a) and yellowness (b) than the control group (p<0.05). The experimental groups showed lower gumminess and chewiness than the control group. According to the results of intensity measurement of sensory properties, the RF-30 and RF-45 groups showed stronger intensities for darkness, sweetness, moistness and softness than the control group. The acceptance test found that the RF-45 group had significantly higher or similar results for all acceptance attributes than the control group. These results indicate that RF addition as a replacement of WF at a ratio of 45% is optimal for producing yellow layer cakes.

This study was carried out to investigate milling's effect on the pasting properties and storage stability of dry-milled rice flour. Rice flour's moisture content was increased from 9.48% to 9.80% after going through a rice polisher, and the crude fat content of rice flour was decreased from 0.91% to 0.62% after going through a rice polisher. In the color index of rice flour, the rice polisher was only affected by yellowness. The pasting properties were verified through RVA, and it was confirmed that the use of a rice polisher had no significant effect on the pasting properties. As a result of observing the changes in fatty acid value, it was ascertained that the storage period could be increased using the rice polisher. These results suggest that the rice polisher can increase the storage period without changing the pasting properties.

In this study, the effects of different varieties and particle sizes of dry milled rice flour on Jeolpyeon quality were investigated. Classify particle size of dry milled rice flour according to rice variety into 50, 100, and 150 μm. A particle size of 50 μm in the varieties Boramchan and Hanareum resulted in the highest damaged starch contents (p<0.05). Additionally, the Boramchan and Hanareum varieties had the highest water absorption index (WAI) values (p<0.05). Analysis of the gelatinization characteristics of dry milled rice flour according to varieties revealed the peak viscosity of Dasan and Hanareum was high (p<0.05), regardless of particle size, while the breakdown was highest for Hanareum at all particle sizes (p<0.05). The moisture content of Jeolpyeon made with Boramchan varied between 48.83 and 53.64% among particle sizes, with no significant differences relative to the control. The hardness of the control was 3.15 kg, while the hardness of Jeolpyeon made with Boramchan decreased significantly 2.60-2.63 kg (p<0.05).

In this study, dry-milled rice flour from different varieties (Samgwang, Boranchan, Hanareum, Dasan, Hangaru) and different particle sizes were used to manufacture Jeung-pyun and the quality characteristics were analyzed. The Jeung-pyun produced from Samgwang, Dasan and Hangaru milled rice flour showed highly dense pores. The Jeung-pyun produced from Hanareum only showed a significant difference according to the particle size. Samgwang, Boranchan and Dasan varieties with a particle size of 150 m showed a significant decrease in volume (p<0.05). Samgwang showed the lowest pH at all particle sizes (p<0.05). The sweetness of Samgwang varieties was the highest at 3.27-3.63°Brix (p<0.05). The hardness of Jeung-pyun increased with increasing particle size (p<0.05). The highest acceptance of Jeung-pyun in terms of volume and bitter taste was observed with Hanareum at a particle size of 50 m. When the particle size was 50 m, the overall acceptance was highest for Jeung-pyun made from Samgwang followed by Hanareum. The acceptance of all the sensory characteristics was high when the particle size of rice flour was 50 m. When the appearance of Jeung-pyun was measured, Samgwang showed a dense structure and low hardness. Hanareum showed an increasing volume and springiness. Overall Samgwang and Hanareum were found to be the most suitable varieties for the production of Jeungpyun.

In January 2016, Korea began rice exporting to China from six domestic Rice Processing Complexes (RPC). The appearance characteristics and quality of medium-short grain milled rice between the exported Korean rice was compared with Wuchang rice, which is known as high quality in Heilongjiang province in China, and the imported rice from Japan and Taiwan in Chinese circulating marketing. The 1000-grain weight of exported rice is 22.4g, which is similar to that of Chinese Wuchang rice, but it tended to be heavier than that of Japanese and Taiwanese. The rice type is round in exporting Korean, Japanese, and Taiwanese rice while Chinese Wuchang rice is thin and long with 2.5. The head rice rate of export rice was 93.3 ~ 98.4%, which was 95.8% on average, which was higher than that of Chinese Wuchang rice, and similar to that of Japanese, and Taiwanese. The protein content of the export rice was 5.2 ~ 6.2%, which was 5.8% on average, similar to that of Chinese Wuchang rice, Japanese and Taiwanese. Amylose content was 18.5% of the exported rice, which was lower than that of Chinese Wuchang rice and slightly higher than that of Japanese and Taiwanese. The whiteness of the exported Korean rice was 35.6 on the average, lower than 41.8 of Chinese Wuchang rice, and lower than that of Japanese and Taiwanese. The purity of rice variety being exported ranged from 87.5 to 100.0%, which was 96.5% on average. This was much higher than that of Chinese Wuchang rice, while the Japanese and Taiwan rices were similar. The sensory test of rice by the experts, cooked rice of the exported was evaluated to be good for all items such as taste, sticky glutinous, and texture compared to Chinese Wuchang rice.

Variations among 15 major waxy cultivars in terms of milling appearance and cooking characteristics at different moisture contents were investigated. Hardness of milled rice kernels increased and 1000-grain weights decreased with the reduction of moisture content. The milled rice kernels showed about two-fold hardness gap between 12 and 16% moisture contents. The 1000-grain weights revealed 6% reduction from 21.4 g to 20.2 g at 16% and 12% moisture contents, respectively. The whiteness of waxy rice which indicated varietal variation also increased with decrease of moisture contents. In most cultivars, the whiteness of waxy rice peaked and stabilized at around 14% moisture content. In milling properties, brown/rough rice ratios were not affected by moisture content, however, milled/brown rice ratios increased with the decrease of moisture contents between 14 - 16%. This implied that the proper moisture content for milling rate of waxy rice is lower than that of non-waxy rice. The chalkiness expression of milled waxy rice varied directly with moisture contents. At 16% moisture content, the rates of translucent and semi-translucent kernels like non-waxy rice were 49.0 - 84.4% while at 14% moisture content, the rates of chalky rice were 88.7 - 99.9%. In terms of cooking properties of milled waxy rice with different moisture contents, lower moisture contents (12 - 13%) were related with higher water absorption rates. The higher volume expansion of cooked milled rice and more soluble solid after cooking in most cultivars showed the possibility of low palatability of cooked waxy rice with lower moisture contents (below 13%).

The purpose of this study was to investigate the quality characteristics of makpyeon prepared with dry milled rice powder. The makpyeon samples prepared with dry milled rice powder and various amount makgeolli (0% (CON), 25% (M25), 50% (M50), 75% (M75), 100% (M100)), and analyzed for moisture content, pH, Hunter’s color value, TPA and sensory evaluation. The moisture content did not showed significant difference among makpyeon samples. The L-value, a-value resulted in that CON showed the highest and decreased with the amount of makgeolli. The b-value of makpyeon samples showed that CON was the lowest and increased with the amount of makgeolli. TPA resulted in that M100 showed the highest hardness and the lowest adhesiveness, cohesiveness. Chewiness and gumminess of makpyeon samples were higher than those of CON. Based on quantitative descriptive analysis, the score of brightness, moistness, particle size and gloss of showed higher in CON that in makpyeon samples, firmness increased with the amount of makgeolli. Flavor attributes of liquor odor, sour odor, fermentation odor of makpyeon was stronger in makpyeon samples that in CON with the amount of makgeolli. Acceptance test resulted in makpyeon made with CON, 100% of makgeolli (M100) showed the significantly highest score in taste and overall acceptance.

This study was conducted the comparative analysis on quality and rice bread process suitability properties by four particle size classification of dry-milled flours for four rice varieties. Dry-milled rice flours were prepared by dry milling and classified according to particle size using 100, 150, 200, and 250 mesh sieves. The mean particle size by four particle size classification of 60 ~ 100 mesh, 100 ~ 150 mesh, 150 ~ 200 mesh, 200 ~ 250 mesh exhibited 118.9 μm, 87.4 μm, 65.3 μm, 46.1 μm, respectively. The particle size of dry-milled rice flours was the finer, the damaged starch content was the higher (r = − 0.570*). The particle size also had significant negative correlation with the water absorption index (r = − 0.533*, r = − 0.593*), and water solubility index (r = − 0.857**, r = − 0.584*). Dry-milled rice flours with particle size of 60 ~ 70 μm, passed through 150 and 200 mesh sieves exhibited the highest specific volume of rice bread. Whereas, the dry-milled rice flour with finer particle size above 200 mesh showed the lowest specific volume of rice bread. These results will be applied as a quality standard to aid in the selection of the most suitable dry-milled rice flour for baking.

Korea. Two kinds of jochung products were prepared from steamed rice(SR) and wet-milled rice flour(WRF) by rice cultivated from 2006 to 2010. It is common to add a liquefying enzyme for rice liquefaction(4 ㎖/1, 000 g rice, at 90～95℃, 3 h) and saccharogenic enzyme with malt(45 g/1, 000 g rice, at 55～57℃, 6 h). In order to evaluate the quality characteristics of jochung, producing rate, pH, solidity, reducing sugar, dextrose equivalence(D.E.), viscosity, total phenolic compound, color value and sensory evaluation were carried out. In terms of the producing rate of jochung, WRF jochung was produced about 7.4% much more than SR jochung. There was no difference in producing rate between the jochung cultivated from 2006 to 2010 rice. The pH varied from 4.86～5.66, solidity was 79.48～82.28%. Color L value was 25.82～27.92, a value of 1.28～2.81, b value were 2.98～4.33. The results of sensory evaluation for jochung, as a whole, received higher score than for the commercial product(Daesang Co., Ltd, Seoul, Korea), overall acceptability score was the highest in the 2008SR. Reducing sugar, dextrose equivalence(D.E.) and total phenolic compounds were determined to be higher WRF jochung than SR jochung, while viscosity was lower WRF jochung than SR jochung. These results are thought to be due to increased surface area of rice by milling. SR jochung manufacturd by wet-milled rice flour will increase the producing rate for jochung, thereby saving manufacturing time and costs.

본 연구는 제조방식별로 제조된 씻지 않는 쌀의 저장특성을 조사하기 위하여 최근 개발된 건식(DT), 반건식(SDT) 및 가수정미방식(WT)의 제조 시스템으로 공시재료를 조제한 후 저장기간과 저장온도에 따른 품질특성을 분석하여 수행하였다. 공시재료는 각각 백도가 41(DT1, SDT1, WT1)과 43(DT2, SDT2, WT2)의 두 가지 수준으로 조제하였으며, 저장기간은 약 12주이었고, 저장온도는 각각 10, 20 및 30℃로 설정하였다. 저장기간 동안의 품질특성을 살펴본 결과색도 b값과 지방산가는 점차 증가하는 경향을 나타내었으며, 백도, 함수율, 탁도, 건고물량 및 총균수는 감소하는 경향을 나타내었다. 그러나 백도, 색도 b값, 탁도 및 건고물량은 저장초기인 1주차 이후부터는 변화가 적게 나타났다. 반면 함수율, 총균수, 지방산가는 제조방식보다 저장온도의 영향이 큰 것으로 나타났으며, 저장온도가 높을수록 함수율과 지방산가는 감소폭이 크게 나타났고, 총균수는 증가폭이 크게 나타났다. 또한 함수율, 탁도, 건고물량은 제조방식의 영향을 받아 가수정미방식으로 제조된 시료의 경우에는 각 항목의 초기값이 다른 제조방식과 차이가 큰 것으로 나타났다. 가수정미방식으로 제조된 시료(WT1, WT2)의 초기함수율은 높게 나타났으며, 탁도 및 건고물량은 다른 제조방식의 시료보다 낮게 나타났으나, 저장기간이 경과함에 따른 감소폭은 비슷한 것으로 나타났다. 따라서 본 연구에서는 건식, 반건식 및 가수정미방식으로 제조한 백미는 저장온도와 저장기간이 증가할수록 저장성이 떨어지는 경향을 나타내었고, 특히 가수정미방식으로 제조된 시료는 초기 품질특성 중 함수율이 높게 나타나 저장중의 산패에 영향을 주는 지방산가가 증가하여 저장성이 낮은 것으로 판단되었다.

본 연구는 쌀의 생산년도별(2005년, 2006년, 2009년) 품질변이 양상을 구명하기 위하여 남평벼와 동진벼에 대한 다양한 이화학적 특성 및 품질특성을 조사하였다. 저장기간이 길수록 단백질 함량은 증가하였으며, amylose 함량 및 Toyo 윤기치는 감소하는 경향을 보여주었다. 또한 지방산도(KOH mg/100 g)는 2006년산 남평벼와 동진벼가 각각 7.79와 4.79를 나타내었고 2005년산 남평벼와 동진벼가 각각 15.95와 15.68를 나타내어 저장기간이 길수록 2009년산에 비하여 지방산도가 월등히 증가되어 고미취 발생과 산패가 진전된 것으로 보여주었다. 또한 색도는 저장기간이 증가할수록 L값, a값, b값 모두에서 증가하는 경향을 보였다. 아밀로그래프에 의한 호화점도 측정 결과에서는 저장 기간이 증가함에 따라 최저점도, 최종점도 및 치반점도 값은 감소하는 경향을 보였지만 강하점도는 증가하는 경향을 보였다. 경도는 저장기간이 증가할수록 잘 부숴지는 경향을 보였고 식미관능평가 결과에서는 일반적으로 저장기간이 증가할수록 선호도가 매우 낮음을 알 수 있었다. 이상의 결과로부터 쌀은 수확 후 저장기간이 5년이상 경과되면 신선도와 품질이 저하되고 지방산도가 증가되어 고미취 및 이취가 발생하고 쌀자체의 호화 및 취반특성에 많은 변화가 나타나 밥맛과 관련하여 품질이 저하될 뿐만아니라 식품원료로서의 가치가 떨어지는 것으로 확인 할 수 있었다.

To know how interacting climate drivers may affect rice quality, we investigated physio-chemical properties of brown and milled rice. Rice crops (Oryza sativa L., cv. Ilmybyeo and Pyounganbyeo) were grown under either ambient [370ppmV (2008)/396ppmV (2009)] or elevated CO2 of 650ppmV (2008)/673ppmV (2009) in three levels of air temperature [(Ta), local ambient Ta [25.9℃ (2008)/24.8℃ (2009)], 1.3℃ and 2.4℃ above ambient Ta] over whole seasons, using six temperature gradient chambers established in paddy fields. Over 2 years, thus the experiments were a 2×3 factorial design with three replicate plots of each CO2×Ta combination. The fractions of normal brown rice were reduced with elevating CO2 by 8% (Ilmybyeo)～14% (Pyounganbyeo), and with rising Ta by 16% (+1.3 ℃)～27% (+2.4℃) in Ilmybyeo and by 27% (+1.3℃)～42% (+2.4℃) in Pyounganbyeo (p=0.015, 0.000, 0.059, 0.000 and 0.017 for CO2, Ta, CO2×Ta, cultivar and Ta×cultivar, respectively). With respect to immature rice, elevating CO2 increased milky-white rice, white-based rice and white-belly rice across cultivars. Warming also significantly increased all immature rice across cultivars, though no CO2×Ta interaction was observed. Over 2 years, the deteriorative effect of warming on brown rice quality was significantly greater in Pyounganbyeo than in Ilmybyeo. Across cultivars, protein contents of milled rice were decreased (c. 5～9%) with elevating CO2 but increased (c. 5%) with warming, though no CO2×Ta interaction was found (p=0.119). Elevating CO2 significantly increased whiteness of milled rice over cultivars but not amylose contents and gloss value of cooked rice, while warming had a strong affect these properties all related rice quality. Overall, our results suggest that warming and elevating CO2, in each alone or in combination, may have the potential to deteriorate physio-chemical properties of rice related to quality.

1. 수확시기에 따른 도정수율은 메벼의 적기수확시기보다 5일정도 늦게 수확하는 것이 높았으며 품종에 따라서는 보석찰벼와 해평찰벼가 도정수율이 높았다. 2. 찹쌀의 특징인 불투명한 유백색은 수분함량 14.0%이상부터 점차 소실되기 시작하여 15.0%대에 마치 멥쌀이 섞인 것처럼 보이다가 16.0%이상에 도달될 경우는 거의 대부분이 멥쌀과 같은 외관을 나타냈다. 3. 수분 증가에 따른 찹쌀의 유백색 소실은 조기에 수확된 벼에서 더 민감하게 나타나기 때문에 가능한 수확시기를 적기 이후로 정하는 것이 건조효율이나 찹쌀 수율 측면에서 더 유리하다고 판단된다. 4. 찹쌀 고유의 유백색 발현을 최대로 하기 위해서는 찰벼 건조수분의 critical point은 13.5%이하였다.

저장기간이 벼 생태형에 따라 미립 특성에 영향하는 정도를 검토하기 위하여 자포니카형, 통일형 및 통일형에서 유래된 1대잡종형의 정조를 4~40 개월간 외부환경이 제어되지 않은 종자 저장실에 저장하여 저장기간에 따른 물리화학적 특성 변화에 대하여 조사한 결과는 다음과 같다. 1. 종자 발아율은 저장기간이 길어짐에 따라 낮아졌는데 자포니카형은 16개월 저장시 66.7%, 28개월 저장시 2.5%로 크게 떨어졌고 40개월 후에는 전혀 발아되지 않았으며, 통일형과 1대잡종형은 28개월까지는 뚜렷한 차이가 없었으나 40개월에는 각각 54.0% 및 67.9%로 발아율의 차이를 보였다. 2. 현미 경도는 통일형, 1대잡종형, 자포니카형의 순서로 높았으며 저장기간에 따른 유의한 차이는 없었다. 3. 알카리 붕괴도는 저장기간이 길어짐에 따라 증가하는 경향이었으며, 단백질 함량은 완만하게 감소하였고, 아밀로즈 함량은 일정한 경향이 없었다. 4. 전당 함량과 환원당 함량은 저장기간이 경과함에 따라 증가하였는데 저장 28 개월 이내에서 증가폭이 컷고 그 이후는 완만한 증가를 보였다. 5. 전당 함량에 대한 환원당 함량의 비율은 저장기간이 길수록 전당 함량보다는 환원당 함량의 증가가 많아서 비율이 높아졌다.