간행물
대한안전경영과학회 학술대회
- 발행기관 대한안전경영과학회
- 자료유형 학술대회
- 간기 연간
- 수록기간 1999 ~ 2022
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
2004년도 대한안전경영과학회 추계학술대회 (2004년 11월) 49건
1.
2004.11
구독 인증기관 무료, 개인회원 유료
4,000원
2.
2004.11
구독 인증기관 무료, 개인회원 유료
RFID(Radio Frequency Identification)를 이용하면 제품에 대한 실시간 파악이 가능하다. RFID는 IT 산업의 대안으로 평가되고 있고, 생산물류 뿐만 아니라 SCM의 재고를 관리하는 데에 있어서도 재고통재 및 관리를 효율적으로 할 수 있다. 또한 품질보증의 기능을 하고 제품에 대한 로트 추적이나 생산과정을 파악할 수 있어 문제점에 대한 재발방지 및 개선에 대한 역할이 가능해 진다. 실시간으로 재고를 통제 및 관리함으로써 보다 효율적인 생산지시 시스템을 구축할 수 있다. 이외에도 IE분야인 공정관리, 작업관리, 설비관리, 유통관리, 유통관리 등에도 적용이 가능하며, 재해의 위험요소를 원천적으로 방지하는 RFID 안전시스템에도 적용할 수 있다. 본 연구는 RFID의 적용 및 활동방안 대해 연구를 통해 새로운 기술환경에서 IE 및 산업안전 분야 등에 활용하고 역할과 책임을 다하고자 하기 위함이다.
4,600원
3.
2004.11
구독 인증기관 무료, 개인회원 유료
공급망 경제를 통한 국가경쟁력 강화방안 및 국가를 구성하는 지방자치단체 발전모델을 검토하고 국가경영관리라는 관점에서 각 지자제 단위단체들의 발전모델과 핵심역량을 강화하는 방안을 찾고자 한다. 동북아의 황금허브로 부각되는 대한민국의 핵심역량을 강화하여 최고의 역량(best competency)을 전 국토에 확대하고자 한다. 공급과 수요에 대한 장기전망을 고려하여 공급망 경제의 국가발전을 위한 핵심경영 관리지표를 개발하고자 한다. 이를 통해 지방자치단체 및 발전적인 국가 경영관리 모델 및 방향을 통해 국가경영전략을 제시하고자 한다.
5,100원
4.
2004.11
구독 인증기관 무료, 개인회원 유료
As environmental damage increase by a highly developed material civilization of today, many companies take a growing immensely interest in the influence of environment for beginning a new paradigm year by year. The previous assessments dose not run the gamut of industry but is confined within a certain facility or an area. Industrial processes and operations can not be accomplished independently but are connected with each others through suppliers and customer, and these ideas are fundamental notions of Life Cycle Assessment(LCA). This paper will introduce Life Cycle Assessment(LCA) n environment which is rising, and would like to build environmental management system using approach of Quality Function Development(QFD) and Safety Function Development(SFD) belonging to the assessment method.
4,000원
5.
2004.11
구독 인증기관 무료, 개인회원 유료
Facility layout for enterprise's competitive power strengthening and construction of offensive manufacture line and direction presentation for design of production management system that is new by operation improvement according to S company. In enterprise in JIT(Just in Time) system of leading persons affecting in productions among a lot of habitat factor analyze. It is that through equipment Layout among those factors enterprise my problem improve and serves enterprise's absolute ability cultivation. Even if it is JIT production main point that affect to apply the modular production to productive system among at equipment Layout, lot size, bottleneck session etc. worker's multi-function anger, change of demand factor and productive capacity add. 'S' Through enterprise's example, I wish to establish Korean medium and small enterprises' manufacturing industry style equipment Layout model by taken place effect interpretation.
4,000원
6.
2004.11
구독 인증기관 무료, 개인회원 유료
본 연구에서는 현재 일반가정이나 영업소에서 사용중인 액화석유가스 용기용밸브의 문제점을 제시하고, L.P 가스사고를 예방할 수 있는 LPG용 과류밸브의 과류차단장치를 개발제작함에 있어 고압가스 안전관리기준 통합고시 제12장 4절 과류차단형 액화석유가스 용기용밸브에서 규정한 과류차단 성능시험을 실시하는데 필요한 여러 가지 변수를 선정하여 차단장치의 형상에 따른 최적의 차단 유량 범위를 찾고자 실험을 실시하였으며, 보다 궁극적으로는 일반 용기용밸브가 가진 문제점을 조속히 해결하고 진정한 의미의 안전밸브를 개발하는데 목적이 있다.
4,000원
7.
2004.11
구독 인증기관 무료, 개인회원 유료
4,000원
8.
2004.11
구독 인증기관 무료, 개인회원 유료
Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for multiple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index MCpm using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other.
4,200원
9.
2004.11
구독 인증기관 무료, 개인회원 유료
Companies adopted a program called Six Sigma, in order to make fundamental changes in the way the company operated to fulfill customers' expectations. Six Sigma reduces the occurrence of defects. This approach derives the overall process of selection the right projects based on their potential to improve performance metrics and selection and training the right people to get the business results. However, in the course of Six Sigma process steps, companies are in the face of problems. This study is to solve the problems using TP(Thinking Process) of TOC(Theory of Constraints). TOC is methodology for solving key problem in system which is called Constraints. Nowadays, its application is going to be wide and its concept is being implemented. In this paper, it is showed possibility of application TOC to Six Sigma.
4,000원
10.
2004.11
구독 인증기관 무료, 개인회원 유료
This paper presents several control charts for safety and environmental performance monitoring. We also propose guidelines that control charts for statistical process control can be used for safety and environmental performance evaluation.
4,000원
11.
2004.11
구독 인증기관 무료, 개인회원 유료
This paper presents 40 inventive principles with applications in total quality management. We also propose how to integrate TRIZ tools into global problem-solving steps.
4,000원
12.
2004.11
구독 인증기관 무료, 개인회원 유료
The purpose of the research is to discuss the product safety procedures for the food area. The producer and supplies of the products should be able to satisfy the needs of the increasing consumer safety. The products, for the purpose of developing and making safe products, must perform Hazard Finding and Risk Analysis to detect potential danger to mike sure the final safety measures are in place. The purpose of Product liability rests finally with the consumer safety and the manufacturer's capability compete in the marketplace. Especially this is important for the food industry. But, our domestic middle and small food industries, it is relatively weak in this are. Thus this research would like to present a easily usable product safety procedures.
4,200원
13.
2004.11
구독 인증기관 무료, 개인회원 유료
3,000원
14.
2004.11
구독 인증기관 무료, 개인회원 유료
Replacement problems can be classed as either deterministic of stochastic. Deterministic problems are those in which the timing and the outcome of the replacement action are assumed to be known with certainty. Before proceeding with development of replacement models it is important to note that preventive replacement actions, that is, ones taken before equipment reaches a failed state, require two necessary conditions: (1) The total cost of the replacement must be greater after failure than before. (2) The failure rate of the equipment must be increasing. Equipment is subject to failure. On failure, one of two possible actions can be taken : repair or complete replacement of the failed equipment. In this paper, we proposed optimal overhaul, repair, replacement maintenance model with two-state.
4,000원
15.
2004.11
구독 인증기관 무료, 개인회원 유료
It is not difficult to see the road repairing. There are many and various machines that can crush road surface. The efficiency and power of the machine depend on crushing head-shape, crushing interval, crushing load, crushing stress, machine's dropping height and roller's kind. The objective of this study is to select the optimal model among ten models of crushing machine with constraints such as crushing depth, variation, and crushed particle size. The data for this study are chosen from the site of construction in Kangnung during three months (2004. 6. 1 ~ 2004. 8. 31). The provided methodology in this paper will be fruitful not only for the selection of crushing machine but also for the aspects of construction period, cost, work efficacy according to the condition from the various sites of construction.
4,000원
16.
2004.11
구독 인증기관 무료, 개인회원 유료
This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.
4,200원
17.
2004.11
구독 인증기관 무료, 개인회원 유료
4,000원
18.
2004.11
구독 인증기관 무료, 개인회원 유료
The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100% inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0~3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.
4,300원
19.
2004.11
구독 인증기관 무료, 개인회원 유료
It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.
4,000원
20.
2004.11
구독 인증기관 무료, 개인회원 유료
Korea Railroad Research Institute(KRRI) has developed the rubber-tired AGT system from 1999 to 2004. The rubber-tired AGT vehicle is now on test for its performance and function in the Gyeong-San test line. Tn this paper, we provide the reliability management plan to assure required the RAMS(reliability, availability, maintainability & safety) of the AGT vehicle system.
4,300원
