Even though the red pepper is one of the most important seasoning vegetables in Korea, the volume of usage of domestic red pepper has shrunk due to decrease in consumption. Thus, researchers and government officers need to seek for solutions to extend usage of domestic red pepper of food processing industry which consumes considerable amount of it. The purpose of this paper is to analyze the factors of the usage of domestic red pepper in food processing companies using cross-tabulation analysis and multiple regression model and to find the implications for promoting the usage of domestic red pepper. The results of studies present that specific characteristics of food processing companies affect the usage of domestic red pepper, including size of sales, shape of company, food product processed by company, human organization for purchase of food material, registered trademark, and support of government. This study also suggests that government needs to offer more supporting programs to sauce industry and improve the system of program to promote the usage of domestic red pepper.

새로운 형태의 페녹시-카르복시레이토페녹시기가 함께 치환된 포스파젠 고분자를 여러 치환율을 가지고 합성하였 다. 이러한 형태의 포스파젠 고분자를 이용해 당뇨병 진단막을 제조하여 혈액 속의 글루코우즈의 농도를 변화시켜가며 680 nm에서의 흡광도를 측정하였다. 기본적으로 흡광도가 시간에 따라 변화하는 양(K/S)과 글루코우즈의 농도가 직선적인 관계 를 가지는 것으로 나타났다. 소수성기인 페녹시기와 친수성기인 카르복시레이토페녹시기의 치환율이 글루코우즈 농도 측정에 미치는 영향을 조사하였다. 친수성기의 치환율이 10% 이하인 경우에는 글루코우즈의 침투속도가 너무 느려 글루코우즈의 농 도 측정이 어려웠다. 그러나 친수성기의 치환율이 10% 이상으로 증가함에 따라 글루코우즈의 농도와 K/S의 기울기 값 (Dose-Response Slope : DRS)이 점차 증가하였다. 하지만 친수성기의 치환율이 30% 이상일 경우에는 글루코우즈가 너무 빨 리 침투하여 DRS가 급격히 증가하였다.

식품 제조업체의 해충 저감화를 위한 방안으로 과자류와 캔디류에서의 곤충관련 이물 클레임 발생 상황을 주요 식품 제조업체를 선정, 2010년부터 2016년 까지 약 7년간 1234건의 곤충관련 이물 클레임을 현물, 사진자료 등을 통하여 조사하였다. 비스켓과 스넥 등의 과자류 370건에서는 딱정벌레목의 비율이 25%로 가장 높았으며, 화랑곡나방 을 포함하는 저장해충이 30%를 차지하였고, 곤충이물 발생유형은 치사성충이 49%를 차지하였다. 클레임 발생원인은 유통, 소비자 단계에서 55%로 가장 높게 조사되었다. 또한 캔디, 쵸코릿, 캐러멜 등을 포함하는 캔디류 72건에서는 나비목이 46%로 가장 높았으며, 화랑곡나방과 어리쌀바구미 등의 저장해충이 56%, 곤충이물 발생유형은 치사성충이 31%로 높게 조사되었으며, 클레임 발생원인은 유통, 소비자 단계에서 79%로 해충 오염 발생 비율이 가장 높게 나타났다.

방충포장 제조용 친환경 기피물질 조사와 적용 가능성 검증을 위하여 식물에서 발현되는 2차대사물질을 함유하는 식품공전에 등재된 식용, 약용식물 선정을 위한 후보군 84종을 조사하였다. 이것을 토대로 저장해충에 방충 및 기피효과를 보인다고 알려진 몇 종의 한약재를 선발한 후 추출물을 이용, 대표적 저장해충인 화랑곡나방과 어리쌀바구 미에 대한 기피효과를 조사하였다. 대상해충에 대한 기피효과의 적합한 분석을 위하여 기피물질 후보군의 추출방법과 물질농축도 등을 다르게 하여 한약재로부터 물질을 추출한 후 기피물질을 확보하였으며, 기피효과 시험은 여지확산법 을 이용하였다. 선정된 기피물질에 대한 기피효과는 화랑곡나방에서는 뚜렷하지 않았으나 어리쌀바구미에서는 7.1~69.3%의 기피효과를 나타냈다. 이러한 결과는 동일한 물질이라 하여도 해충 종에 따라 기피효과가 달라질 수 있음을 보이는 것이다.

In recent years, there have been many serious disasters caused by the lack of basic safety and health measures at workplaces, such as chemical poisoning accidents and fire and explosion accidents at large shipyards. At the same time, interest and awareness of the safety of our people is rising. There are several schemes to preemptively remove industrial accidents. Among them, the safety and health diagnosis system that provides the safety and health of the workplace is proposed as an alternative and the system is expanding quantitatively every year by suggesting problems and remedial measures. Therefore, it is very important to secure the safety and health of the workplace through the safety and health diagnosis. However, due to the lack of laws and regulations on safety and health diagnosis system, dumping of diagnosis amount due to the existence of too many diagnosis agencies, lack of expertise of diagnostic workforce, etc. there has been serious disasters in the diagnostic workspaces. In this regard, the reliability of the safety and health diagnosis is questionable. Therefore, in this study, I intend to improve the reliability of safety and health diagnosis by reviving the intention of safety and health diagnosis legislation

Risk assessment in the manufacturing field has greatly contributed to rationalization and improvement of image of enterprise by preventing of serious accident and through systematic management of pre-risk factors for each manufacturing process, proceduralization of work processes, and simplification of safety management documents. However, as applied to manufacturing industries requiring diversity and complexity,€perfunctory improvement has been carried out. As a result of the study, the current system of risk assessment is generally implemented by upper management, whereas, it turns out that workers who are most exposed to risk have lack of knowledge and understanding of risk assessment. In order to improve the problems in the current system of manufacturing risk assessment and increase practicality, following two methods have been suggested to implement. One is an execution of risk assessment training for manufacturing safety and health and the other is an application of participatory (workers) risk assessment training.

Smart Manufacturing Factory is a paradigm of the future lead to the fourth industrial revolution that led Germany and the United States. Now the automation of the production facility and won a certain degree, and through the process of integrating the entire process, including planning, design, distribution of information and communication technology products in emerging as a core competitiveness of the national economy. In particular, the company accelerated the smart factory building in order to improve the manufacturing industry, cost savings and productivity simply to incorporate internet of things(IoT),Robot, artificial intelligence, big data technology as a factory automation level of sophistication of the system and out to progress to the level that replaces human labor have. In this we should look at the trend of promoting domestic and foreign factories want to present these smart strategies for Korea.

Boron-doped diamond (BDD) electrode has an extremely wide potential window in aqueous and non-aqueous electrolytes, very low and stable background current and high resistance to surface fouling due to weak adsorption. These features endow the BDD electrode with potentially wide electrochemical applications, in such areas as wastewater treatment, electrosynthesis and electrochemical sensors. In this study, the characteristics of the BDD electrode were examined by scanning electron microscopy (SEM) and evaluated by accelerated life test. The effects of manufacturing conditions on the BDD electrode were determined and remedies for negative effects were noted in order to improve the electrode lifetime in wastewater treatment. The lifetime of the BDD electrode was influenced by manufacturing conditions, such as surface roughness, seeding method and rate of introduction of gases into the reaction chamber. The results of this study showed that BDD electrodes manufactured using sanding media of different sizes resulted in the most effective electrode lifetime when the particle size of alumina used was from 75~106 μm (#150). Ultrasonic treatment was found to be more effective than polishing treatment in the test of seeding processes. In addition to this, BDD electrodes manufactured by introducing gases at different rates resulted in the most effective electrode lifetime when the introduced gas had a composition of hydrogen gas 94.5 vol.% carbon source gas 1.6 vol.% and boron source gas 3.9 vol.%.

색조 화장품 원료로 사용되는 무기안료 탈크와 소수성 실리카의 제타전위 차를 조절하여 표 면처리된 판상 무기안료 복합체를 제조하였다. 탈크는 색조 화장품의 처방에서 주로 쓰이는 판상 무기물 질로서 피부에 대한 발림성과 퍼짐성을 갖는 백색 안료이다. 또한 분산성과 신장성이 우수하며, 내열성, 내광성, 내화학성 등에 안정하다. 실리카는 일반적인 색조화장품에서 화장의 지속성을 높여주며 제형에 서의 안정성을 높여주는 역할을 한다. 본 연구에서는 탈크와 소수성 실리카를 각각 양이온성, 음이온성 계면활성제로 표면전하를 조절한 후 제타전위 차를 이용하여 탈크 표면에 소수성 실리카를 표면처리하 여 무기안료 복합체를 제조하였다. 제조된 무기안료 복합체는 소수성 실리카가 탈크 표면 위에 1㎛ 이 하로 코팅되어 있으며 효과적인 소수성을 띤다. 무기안료의 표면전하 분석을 위해 제타전위를 측정하였 고, 계면활성제 표면처리된 안료는 FT-IR 로 계면활성제의 작용기를 확인하였다. 무기안료 복합체의 표 면은 SEM, EDS, FIB 등으로 관찰하였으며, XRD, FT-IR 등으로 구조를 확인하였다.

본 연구는 반추동물용 섬유질배합사료(TMR) 제조업체 의 사료안전관리 인식 및 사료 중 위해인자 오염도를 조사 하기 위해 138개소 TMR 제조시설을 대상으로 약 10개월 동안 설문조사를 실시하였다. 조사표는 총 17개 문항으로 구성하였으며, 얻어진 자료는 기술통계분석, 교차분석 및 신뢰도 검정을 통해 분석하였다. TMR 제조시설의 평균 일 일 생산능력은 81.38톤 이었다. 평균 개업연도는 2004년 및 종사인원은 13.7명이었고, 유통경로는 직접거래가 80.4%로 가장 많았다. 사료안전관리 시스템 도입은 사료안전관리의 제도적 여건이 조성된 후 도입이 필요하다는 인식이 주를 이루었으며, 사료안전관리 시스템 구축을 위해서는 사료안 전정보 제공 및 공유가 가장 필요한 조건으로 나타났다. 사료안전성 및 위해물질 관리에 가장 취약한 분야는 곰팡 이 독소인 것으로 조사되었으며, 사료 제조과정에서 가장 위험한 위해인자는 쇠, 파편, 흙 등과 같은 이물질로 나타 났다. 사료 중 위험인자 오염도 조사에서 카드뮴, 비소 및 셀레늄은 허용기준치를 초과한 제품이 일부 조사되었고, 오크라톡신류 및 아플라톡신류는 허용범위내로 조사되었 다. 잔류농약, BSE, 푸모니신 및 살모넬라는 검출되지 않았 으며, 멜라민 및 비단백태질소화합물은 각각 11.35ppm 및 5%로 최댓값을 나타냈다. 규모별 TMR 제조시설의 사료 내 위해인자 오염도는 규모별로 차이가 많았으며, 같은 규 모 내에서도 제조시설에 따라 위해인자의 검출량이 다르 게 나타났다. 또한 소규모에 비해 중규모 및 대규모에서 위해인자 검출량이 더 높아지는 경향을 보였다. 따라서 본 조사결과 TMR 제조시설의 사료안전관리 시스템을 구축하 기 위해서는 사료안전에 대한 정보제공 및 공유가 정책적 으로 제도화되어야 하고, 사료 내 발생하는 곰팡이 독소방 지 및 이물질 제거를 위한 사료관리법의 강화와 원료 공급 처에서 이물질을 제거할 수 있는 장치 도입을 의무화할 필 요가 있다고 판단된다.

WC-CrC-Ni coatings were prepared by nine processes of the Taguchi program with three levels for the four spray parameters: spray distance, flow rates of hydrogen and oxygen, and powder feed rate. The optimal coating process (OCP) was oxygen flow rate of 38 FMR, hydrogen flow rate of 53 FMR, powder feed rate of 25 g/min, and spray distance of 7 inches. Hardness of 1150 Hv and porosity of 1.2 %, were obtained by OCP; these are better results compared with the highest 1033 Hv and the lowest 1.5% porosity obtained by nine processes of the Taguchi program. Friction coefficient of the WC-CrC-Ni coating decreased from 0.36 ± 0.07 at 25 oC to 0.23 ± 0.07 at 450 oC. These values were smaller than those of the EHC (electrolytic hard chrome) plating at both temperatures due to lubrication from the oxide debris. The wear trace and wear depth of the coating are smaller than those of the EHC at both temperatures. Pitting was not found in the WC-CrC-Ni coating sample, while it did appear in the EHC sample.

이 연구는 초음파 에너지의 공동현상(Cavitation)을 이용하여 선내 제조된 혼합연료유의 문제점을 개선하고 혼합연료유의 안정적인 사용이 가능하도록 하여 선박운용비의 상당부분을 차지하는 연료비를 절감하고자 한다. 실험은 선내 혼합연료유 제조 방식을 모사하여 선박용 연료유 M.G.O(Marine Gas Oil)와 MF-180(Marine Fuel-oil 180)를 각각 부피비 기준으로 0.25:0.75 및 0.75:0.25 비율로 혼합하였으며 초음파 처리장치를 이용하여 혼합연료유에 초음파 에너지를 직접 조사하여 초음파 에너지가 혼합연료유에 미치는 영향에 관해 고찰하였다. 실험결과, 선내 혼합유 제조시 보고되었던 문제점을 확인하였으며, 혼합시료유의 초음파 조사 후 잔류탄소량은 최대 28.4 % 감소하였다. 또한, 잔류탄소량 감소 및 분산 안정성 분석결과를 토대로 초음파 에너지에 의한 캐비티의 붕괴압이 연료입자 미립화에 효과가 있고, 중질연료유가 많이 함유된 혼합연료유의 일시적인 가용성을 높일 수 있을 것으로 판단되었다.

본 연구에서는 막 결합형 축전식 탈염공정에 적용하기 위하여 고분자 지지체 polyvinylidene fluoride (PVDF)에 상용화된 양이온 및 음이온교환수지를 배합하여 불균질 이온교환막을 제조하였다. PVDF와 이온교환수지의 배합비율을 1 : 1, 1.4 : 1, 2 : 1, 3 : 1로 달리하였으며 SEM, 함수율, 이온교환용량, 메탄올 투과도, 이온전도도를 측정하여 물리화학적 특성을 평가하였다. 특성평가 결과 모든 특성을 고려하였을 때 2 : 1의 배합비율이 가장 우수한 값을 나타내었다. 2 : 1의 배합비율로 제조한 불균질 양이온교환막의 함수율은 34%, 이온교환용량은 1.54 meq/g, 이온전도도는 0.019 S/cm, 메탄올 투과도는 2.28 × 10-7~8.86 × 10-7 cm2/s의 값을 나타내었으며 불균질 음이온교환막에서는 각 각 37%, 2.18 meq/g, 0.034 S/cm, 1.46 × 10-7~8.66 × 10-7 cm2/s의 값을 나타내었다.

This study was carried out to extract ginsenosides in by-products from honeyed red ginseng. Response surface methodology (RSM) was used to optimize the extraction conditions. Based on D-optimal design, independent variables were ethanol (extraction solvent) concentration (30-90%, v/v), extraction temperature (25-70oC), and extraction time (5-11 h). Extraction yield (Y1) and total ginsenosides (Y2) in the extract were analyzed as dependent variables. Results found that extraction yield increased with increasing extraction temperature and time, whereas it was decreased with increasing ethanol concentration. Similar trends were found for the content of ginsenosides in the extracts, except for ethanol concentration, which was increased with increasing ethanol concentration. Regression equations derived from RSM were suggested to coincide well with the results from the experiments. The optimal extraction conditions for extraction yield and total ginsenosides were an extraction temperature of 56.94oC, ethanol concentration of 57.90%, and extraction time of 11 h. Under these conditions, extraction yield and total ginsenoside contents were predicted to be 84.52% and 9.54 mg/g, respectively.

This study investigated the effects of the mixing ratio of tofu paste and normal corn starch on the characteristics of gluten-free (GF) muffins. Soft wheat flour for wheat flour-based muffins (control) was replaced with the mixture of tofu paste and normal corn starch (NCS). The mixing ratios of tofu paste and NCS were 1:6.4 (S100), 1:5.1 (S80), 1:3.8 (S60), 1:2.6 (S40), 1:1.3 (S20), and 1:0 (S00), based on their total solid contents. GF muffins of S40- S100 developed the porous, sponge-like structure without crumb collapse. The weight and baking loss did not significantly differ in the control and GF muffins. By decreasing NCS in GF muffin batters, the moisture content, firmness, and crumb redness/yellowness of GF muffins increased, while their volume, specific volume, and crumb lightness decreased. Nevertheless, these characteristics (except for firmness) of S100 were much closer to those of the control. In the preference test, however, S60 (possessing lower attributes than S100 and S80) was most favored among GF muffins, and was very similar in all evaluations (except for appearance) to the control. Overall, the mixture of tofu paste and NCS would be a potential material to replace soft wheat flour in muffins.

In this study, we report the microstructure and the high-temperature oxidation behavior of Fe-Ni alloys by spark plasma sintering. Structural characterization is performed by scanning electron microscopy and X-ray diffraction. The oxidation behavior of Fe-Ni alloys is studied by means of a high-temperature oxidation test at 1000oC in air. The effect of Ni content of Fe-Ni alloys on the microstructure and on the oxidation characteristics is investigated in detail. In the case of Fe-2Ni and Fe-5Ni alloys, the microstructure is a ferrite (α) phase with body centered cubic (BCC) structure, and the microstructure of Fe-10Ni and Fe-20Ni alloys is considered to be a massive martensite (α’) phase with the same BCC structure as that of the ferrite phase. As the Ni content increases, the micro-Vickers hardness of the alloys also increases. It can also be seen that the oxidation resistance is improved by decreasing the thickness of the oxide film.

연구에서는 고분자전해질 연료전지(PEMFC)의 전해질막의 성능향상을 위하여 sulfonated graphene oxide (sGO)와 Nafion을 이용하여 복합막을 개발하였다. sGO/Nafion 복합막 안의 sGO의 균일한 분산을 위해 각기 다른 용매를 사 용한 sGO 분산액과 Nafion 현탁액을 혼합하여 복합막들을 제조하였다. 제조된 복합막들의 물성 및 전기화학적 특성을 평가 하기 위해 SEM, FT-IR, 이온 전도도, 이온 교환 용량, 함수율, 열안정성 등을 수행하였다. 연구 결과 ODB와 DMAc 혼합 용 매로 sGO를 분산하여 고분자 용액 내에서의 분산도를 향상시켰으며, 이 결과 11 wt%의 낮은 함수율에도 불구하고, 0.06 S cm-1의 기존 연구와 유사한 이온 전도도를 나타내었다.

Titanium carbide (TiC) powders are successfully synthesized by carburization of titanium hydride (TiH2) powders. The TiH2 powders with size lower than 45 μm (-325 Mesh) are optimally produced by the hydrogenation process, and are mixed with graphite powder by ball milling. The mixtures are then heat-treated in an Ar atmosphere at 800-1200oC for carburization to occur. It has been experimentally and thermodynamically determined that the dehydrogenation, “TiH2 = Ti + H2”, and carburization, “Ti + C = TiC”, occur simultaneously over the reaction temperature range. The unreacted graphite content (free carbon) in each product is precisely measured by acid dissolution and by the filtering method, and it is possible to conclude that the maximal carbon stoichiometry of TiC0.94 is accomplished at 1200oC.

This study describes the effects of polyurethane/loess powder (PU/LP) nanofiber thin films composite produced from electrospun for absorption volatile organic compounds (VOCs) from air. Environmental issue has become a focus with improving people's living quality. The VOCs are one of the factors that affect the environmental safety. So, in order to improve the environment and safety for people, many air cleaning techniques have been investigated. One of the methods is nanofiber filtration technology. In this study, the PU nanofiber thin film has been studied that it has the adsorption of VOCs capacity, and LP nanoparticles (NPs) can be used as an additive to load into PU nanofiber thin film by electrospinning. For studying PU/LP nanofiber thin films's absorption of VOCs capacity, 4 samples (0, 10, 30, and 50 wt% LP with respect to PU) were manufactured, respectively. The results show that PU composite mats containing 30 wt% LP NPs has the highest VOCs absorption capacity, and the adsorption capacity for toluene was the highest compared to benzene and chloroform.

Transparent organic-inorganic hybrid hard coating films were prepared by the addition of SiO2 or ZrO2, as an inorganic filler to improve the hardness property, filler was highly dispersed in the acrylic resin. To improve the compatibility in the acrylic resin, SiO2 or ZrO2 is surface-modified using various silanes with variation of the modification time and silane content. Depending on the content and kind of the modified inorganic oxide, transparent modified inorganic sols were formulated in acryl resin. Then, the sols were bar coated and cured on PET films to investigate the optical and mechanical properties. The optimized film, which has a modified ZrO2 content of 4 wt% markedly improved in terms of the hardness, haze, and transparency as compared to neat acrylate resin and acrylate resin containing modified SiO2 content of 8 wt%. Meanwhile, the low transparency and high haze of these films slowly appeared at SiO2 content above 10 wt% and ZrO2 content of 5 wt%, but the hardness values were maintained at 2H and 3H, respectively, in comparison with the HB of neat acrylate resin.