담배가루이(Bemisia tabaci)의 약제에 대한 저항성 문제를 해결하기 위한 방편 의 일환으로 RNA interference(RNAi)를 이용한 해충방제가 시도되고 있다. 본 연 구에서는 RNAi를 이용하여 담배가루이 방제를 위한 target 유전자들을 선발하기 위해 gateway system을 이용한 담배가루이 cDNA library 제작하고, RNAi에 적절 한 약 100-400bp의 insert를 확인하였다. 또한, blast search 및 EST database 비교 분석 결과, 대부분이 담배가루이 관련 유전자임을 확인하였고, 최종적으로 1.75⨉ 106 titer의 담배가루이 cDNA library를 완성하였다. 완성한 cDNA library를 att site 를 가지는 TRV(tobacco rattle virus) RNA2 vector에 LR recombination한 다음 Agrobacterium tumefaciens (EHA105)에 transformation 후 sequencing을 통해 redundancy를 확인하였다. A. tumefaciens (EHA105)에 transformation된 cell을 토 마토에 Agro-infiltration 시킨 후 담배가루이가 섭식하여 체내에서도 RNAi의 발현 을 유도하면 담배가루이 살충 또는 기피효과를 행동학적 변화로 확인하고, 또한 이 와 관련된 target 유전자를 선발하는데 이용될 수 있을 것으로 사료된다.

It is important to develop the smart ventilation system in order to minimize a building energy consumption using ventilation. In this study, We evaluated the efficiency of the smart ventilation system being developed at the nursery. To evaluate the energy savings and carbon dioxide removal efficiency, two kinds of experimental conditions were compared. First, air conditioner and Smart HVAC system were operated. Second, air conditioner was operating and external air was put into the inside by rate of air circulation. It was more effective when working with air conditioning and ventilation system at the same time. If the Smart HVAC system is applied in a multi-use facility, indoor air quality will be comfortable and the social cost will be reduced.

In order to minimize a building energy consumption with ventilation, a development of smart ventilation system is very important. In this study, a dry adsorbent that is main element of smart ventilation system was developed for removing indoor CO2, and evaluate the adsorption performance. Specific surface area, pore characteristic and crystal structure of the modified sorbent was measured to analyze physical properties. From this analysis, it was found that the developed absorbent has a low specific surface area, due to mesopores of substrate was filled with metal contained raw material. Additionally, through analysis of the adsorption properties, the developed adsorbent was shown a adsorption form of mesopore (type Ⅳ), which means adsorption amount was rapidly increased at the part of high-pressure. Order to applying for the field, chamber test was performed. Continuous column tests (2,500 ppm) and batch chamber tests (4 m3, 5,000 ppm) showed CO2 removal efficiency of 95% and 88% within 1 hour, respectively.

NCS(National Competency Standards) is made by HRDKorea for real company, education, training and qualifications under the current government of national issues. It developed 836 units on the classification of KECO. But. Actual companies do not take advantage of improvements in job competency and production processes. This study is redesigned a real company production process use to some developed the NCS standards. After we finds some process problems and then searches the improve methods on analysis the problems.

In recent years, Smart Water Grid (SWG) concept has globally emerged over the last decade and also gained significant recognition in South Korea. Especially, there has been growing interest in water demand forecast and this has led to various studies regarding energy saving and improvement of water supply reliability. In this regard, this study aims to develop a nonlinear ensemble model for hourly water demand forecasting which allow us to estimate uncertainties across different model classes. The concepts was demonstrated through application to observed from water plant (A) in the South Korea. Various statistics (e.g. the efficiency coefficient, the correlation coefficient, the root mean square error, and a maximum error rate) were evaluated to investigate model efficiency. The ensemble based model with an cross-validate prediction procedure showed better predictability for water demand forecasting at different temporal resolutions. In particular, the performance of the ensemble model on hourly water demand data showed promising results against other individual prediction schemes.

2013년 하계 자란만 서부 연안에서 Cochlodinium polykrikoides 적조의 미발생 원인을 화학적 현장관측결과와 기존에 발표된 C. polykrikoides의 생리학적 자료를 이용하여 해석하였다. 조사기간 동안 식물플랑크톤 군집은 규조류가 우점하고 있었으며, Cerataulina pelagica, Chaetoceros spp., Navicula spp. 그리고 Nitzschia spp.가 주요 우점종으로 출현하였다. 자란만 서부 연안의 영양염 농도는 이전의 C.polykrikoides 적조 발생 시기에 비해서 DIP 농도는 유사하였지만, DIN 농도는 낮았다. 특히, C. polykrikoides는 자란만 서부 연안에서 우점종으로 출현하는 규조류들에 비해서 무기 영양염에 대한 반포화상수(Ks)가 낮아 이들과의 종 경쟁에서 불리한 위치에 있는 것으로 보였다. 또한 상대적으로 낮은 DIN 농도를 보인 자란만 서부 연안은 질소에 대한 의존성이 높은 C. polykrikoides가 증식하기 위해서 불리한 환경이었다. 따라서 자란만 서부 연안의 낮은 영양염 환경하에서 무기 영양염 경쟁에 대해 불리한 위치에 있는 C. polykrikoides는 규조류의 번무에 따라 출현이 억제된 것으로 생각된다.

이 연구에서는 몽골 흡수굴 호수 인근에서 발견되는 설치류(땅다람쥐) 서관 구조의 일반적인 특징을 조사하였다. 설치류 서관 구조는 직선이거나 약하게 휘어진 형태이며 완만하게 경사진 형태롤 보인다. 단면상의 모양은 원형 내지는 타원형이고 지름은 주로 8-10 cm의 크기를 보인다. 버려진 서관 구조들은 대부분 토양이나 자갈에 의해 수동적으로 채워져 있다. 연구 지역에서 관찰되는 서관 구조의 크기와 구조적인 특징들은 이전에 한국에서 보고된 플라이스토세 후기 서관 구조들과 매우 유사하므로 한국에서 발견되었던 서관 구조들도 땅다람쥐과에 의해 형성된 것으로 판단된다. 하지만 서관 구조 충진물의 차이로 판단할 때 당시 한국의 연평균 강수량이 몽골에 비해 훨씬 높았던 것으로 생각된다.

본 연구는 한려해상국립공원 동부지역에 위치한 5개의 특정도서지역(소치도, 장도, 세존도, 솔섬, 학섬)의 관속식물상을 2011년 4월부터 2012년 10월까지 총 50회에 걸쳐 조사를 실시하였다. 장도에서 관속식물의 출현은 특산식물 1분류군, 귀화식물 10분류군, 희귀식물 1종을 포함하여 총 52과 102속 11종11변종 2품종 124분류군 이 조사되었으며, 학섬에서는 44과 73속 76종 8변종 84분류군이 출현하였고 특산식물 3분류군 귀화식물 5분류군을 포함하고 있었다. 소치도에서의 관속식물은 38과 51속 51종 8변종 59분류군이 출현하였고, 귀화식물 3분류군, 희귀식물 3분류군이 조사되었다. 솔섬에서는 귀화식물 1종, 희귀식물 2분류군을 포함하여 28과 28속 24종 4변종 28분류군, 세존도에서는 귀화식물 1종, 희귀식물 1종을 포함하여 15과 19속 16종 4변종 20분류군이 출현하였다. 식물구계학적 특정식물은 I등급 46종, II등급 1종, III등급 16종, Ⅳ등급 2종, Ⅴ등급 4종이 출현하였다.

This paper aims at researching the cave concept of the Japanese architect Terunobu Fujimori and the result could be summarised as follows. First, a cave is Fujimori's only theme related to the interior space. He set some design guidelines for practice concerning openings of the wall and finishing materials of the interior, following the two major characteristics of a cave: 'comfortability' and 'homogeneity in material'. And 'fire' was also the premise in the cave as a 'spirit' of the space. Second, Fujimori applied the concrete guidelines to Tanpopo House (1994~95), which had in fact borne the ideas. Yakisugi House (2005~07) that took the cave as its design theme showed the transition of his cave concept, from closedness to openness. Third, though his cave concept might deserve the criticism that it is inclined to 'image' rather than 'essence', it illustrates that he seeks after an archetype of human dwelling before the purity of the original space was tarnished with rationality and abstraction. And the cave idea allows the seemingly contradictory 'sachlich' and 'surrealistic' features to coexist. Summing up, Fujimori's cave concept proves that his architecture is a rejection of the Cartesian modernist ideal and the contemporary architects' desire for dematerialisation. In a fundamental level, however, it is a result of his strategic choice induced by his own primary principle that his building must not be similar to any styles in history or any other architects' works in the world.

In this study, nano-scale copper powders were reduction treated in a hydrogen atmosphere at the relativelyhigh temperature of 350℃ in order to eliminate surface oxide layers, which are the main obstacles for fabricating anano/ultrafine grained bulk parts from the nano-scale powders. The changes in composition and microstructure beforeand after the hydrogen reduction treatment were evaluated by analyzing X-ray diffraction (XRD) line profile patternsusing the convolutional multiple whole profile (CMWP) procedure. In order to confirm the result from the XRD lineprofile analysis, transmitted electron microscope observations were performed on the specimen of the hydrogen reduc-tion treated powders fabricated using a focused ion beam process. A quasi-statically compacted specimen from the nano-scale powders was produced and Vickers micro-hardness was measured to verify the potential of the powders as thebasis for a bulk nano/ultrafine grained material. Although the bonding between particles and the growth in size of theparticles occurred, crystallites retained their nano-scale size evaluated using the XRD results. The hardness results dem-onstrate the usefulness of the powders for a nano/ultrafine grained material, once a good consolidation of powders isachieved.

In this study, nanocrystalline Cu-Ni bulk materials with various compositions were cold compacted by a shock compaction method using a single-stage gas gun system. Since the oxide layers on powder surface disturbs bonding between powder particles during the shock compaction process, each nanopowder was hydrogen-reduced to remove the oxide layers. X-ray peak analysis shows that hydrogen reduction successfully removed the oxide layers from the nano powders. For the shock compaction process, mixed powder samples with various compositions were prepared using a roller mixer. After the shock compaction process, the density of specimens increased up to 95% of the relative density. Longitudinal cross-sections of the shock compacted specimen demonstrates that a boundary between two powders are clearly distinguished and agglomerated powder particles remained in the compacted bulk. Internal crack tended to decrease with an increase in volumetric ratio of nano Cu powders in compacted bulk, showing that nano Cu powders has a higher coherency than nano Ni powders. On the other hand, hardness results are dominated by volume fraction of the nano Ni powder. The crystalline size of the shock compacted bulk materials was greatly reduced from the initial powder crystalline size since the shock wave severely deformed the powders.

Registration and identification of companion dos in urban areas is important for the wellbeing of the animals themselves, owner's piece of mind, and to allow city to plan for future community needs. Recently, in Korea, all dogs in urban areas must be registered at the regional city offices. Owners are encouraged to implant microchips in their cats and dogs regardless of age as it ensures these pets can be quickly reunited with the owners after separation. We are aimed to conduct the survey research to evaluate the perception of companion dog's owners on the animal registration policy. We deals with the findings obtained from extensive interviews with a representative samples. The objectives of interviews included 300 owners in Iksan city. Questions focused on how people were recognized the need and policies of animal registration. Questionnaire and technical data are analysed and summarized. As the results of the survey research, the objectives of interviews had well understood about the policies of animal registration. Conclusionally, the promotions of animal registration policies were need. The development of fanimal registration policies were desirable for the establishment of companion animal welfare.

담배가루이(Bemisia tabaci)는 외래해충으로 바이러스벡터로 작용하여, 토마토에 토마토황화잎말림병바이러스(TYLCV)를 비롯한 약 100여종의 바이러스를 매개하는 중요한 해충이다. 담배가루이는 화학합성 작물보호제에 대한 저항성 발현이 빨라서 이들의 방제에 어려움을 겪고 있다. 이러한 저항성 문제를 해결하기 위한 방편의 일환으로 RNA interference(RNAi)를 이용한 해충방제가 시도되고 있다. 뿐만 아니라, RNAi를 이용하면 해당 해충의 target 유전자를 연구하는데 도움이 될 수 있다. 본 연구에서는 RNAi를 이용하여 담배가루이 방제를 위한 target 유전자들을 선발하기 위해 gateway system을 이용한 담배가루이 cDNA library 제작을 시도하였다. 그 결과 RNAi에 적절한 약 100∼400bp의 insert를 확인하였으며, blast search 및 EST database 비교 분석 결과, 대부분이 담배가루이 관련 유전자임을 확인하였고, 최종적으로 1.75⨉106 titer의 담배가루이 cDNA library를 완성하였다. 이러한 cDNA library는 att site를 가지는 TRV2(tobacco rattle virus) vector에 LR recombination한 다음 Agrobacterium tumefaciens (EHA105)에 transformation 후 토마토에 접종하여 담배가루이가 섭식하여 체내에서도 RNAi의 발현을 유도하면 담배가루이 살충 또는 기피효과를 행동학적 변화로 확인하고, 또한 이와 관련된 target 유전자를 선발하는데 이용될 수 있을 것으로 사료된다.

In this study, nanocrystalline nickel powders were cold compacted by a dynamic compaction method usinga single-stage gas gun system. A bending test was conducted to measure the bonding strengths of the compacted regionsand microstructures of the specimen were analyzed using a scanning electron microscopy. The specimen was separatedinto two parts by a horizontal crack after compaction. Density test shows that the powder compaction occurred only inthe upper part of the specimen. Brittle fracture was occurred during the bending test of the compact sample. Dispersionof shock energy due to spalling highly affected the bonding status of the nanocrystalline nickel powder.

Bulk nanostructured copper was fabricated by a shock compaction method using the planar shock wavegenerated by a single gas gun system. Nano sized powders, average diameter of 100 nm, were compacted into the cap-sule and target die, which were designed to eliminate the effect of undesired shock wave, and then impacted with analuminum alloy target at 400 m/s. Microstructure and mechanical properties of the shock compact specimen were ana-lyzed using an optical microscope (OM), scanning electron microscope (SEM), and micro indentation. Hardness resultsshowed low values (approximately 45~80 Hv) similar or slightly higher than those of conventional coarse grained com-mercial purity copper. This result indicates the poor quality of bonding between particles. Images from OM and SEMalso confirmed that no strong bonding was achieved between them due to the insufficient energy and surface oxygenlayer of the powders.

Fe4[Fe(CN)6]3 coated on a mica or TiO2/mica surface as infrared reflective blue pigment was prepared by a hydrothermal method. Fe4[Fe(CN)6]3, used as coloring agent, was uniformly coated on mica or TiO2/mica under the optimized condition of a 1.2 : 1 weight ratio between iron(III) chloride hexahydrate and potassium ferrocyanidetrihydrate at the initial pH level of 4.5 at 70˚C. The infrared (IR)-reflective pigments were characterized by SEM, Zeta-potenial, FT-IR, and UV-VIS NIR spectrophotometry. Especially the CIE color coordinate and total solar reflectance(TSR) properties of the pigments were investigated in relation to variation of the coating and coated substrate thicknesses. Isolation-heat paint was prepared with 20 wt% blue pigments fully dispersed in acryl-urethane resin and several additives to coat the film uniformly. The films were also measured with CIE color coordinate, TSR, and the surface temperature was recorded by an isolation-heat measuring system. The pigments and films of Fe4[Fe(CN)6]3 coated on mica and TiO2/mica showed high TSR values compared with the TSR value of Fe4[Fe(CN)6]3 itself. According to the increase of TSR value, the property of isolation-heat is effective. To realize the optimal blue color, we applied the the pigment to TiO2 coated mica(TM(b)) which has blueish interference color. The pigment of Fe4[Fe(CN)6]3 coated on TM(b) shows a strong blue color compared with that of Fe4[Fe(CN)6]3 coated on TiO2/Mmca(TM(w)), which has a whitish interference color.

An elementary school is an important public place for children and it is where they spend most of their days. Ten elementary schools of environmental pollutants were measured in the classroom, playground and school zones (June 19 ~ Nov 1, 2012). Dust measurements of some schools were more indoor air. Measurements of black carbon concentrations were higher overall school zones. Also, in the case of formaldehyde, benzene and some environmental standards were exceeded. In the case of outdoor pollutants not statistically significant, but in some cars and vans that were correlated with pollutants. Thus, strategies and actions are necessary that will protect the health of children in schools from environmental pollutants.

In this study, flexural strength properties of SC shear walls were investigated through static pushover test. Failure modes and stiffness characteristics of SC shear walls under lateral loads were inspected by analyzing the experimental results. Main failures of unstiffened SC shear walls were found to be the type of bending shear failure due to the unbonding of the steel plate at the concrete interface. The ductility capacity of SC structures was also confirmed to be improved, which is considered to be a confining effect on steel plates in the longitudinal behavior of SC shear walls.

본 연구는 고온미생물인 Bacillus coagulans를 이용하여 발효시킨 탈피대두박(fermented soybean meal; FS)을 어분대체 단백질원으로서 10%, 20% 및 30% 수준별로 첨가한 배합사료를 급여하여 넙치의 성장 및 육질에 미치는 영향을 비교 조사하였다. 사육실험은 평균체중 123 g의 넙치를 원형수조에 50마리씩 실험구별로 3반복으로 수용하면서, 대조 배합사료(control)와 실험배합사료(FS10, FS20, FS30)를 8주간 사육하였다. 수분과 조단백질 함량은 대조 배합사료를 공급한 넙치의 등근육과 실험 배합사료를 공급한 넙치의 등근육에서 유의적한 차이를 보이지 않았으나, 조지방 함량은 실험배합사료 FS20, FS30을 공급한 넙치 등근육에서 유의적으로 높은 값을 나타내었다. 18:2n-6의 함량은 실험배합사료 FS10, FS20, FS30을 공급한 넙치 등근육에서 대조 배합사료를 공급한 넙치 등근육보다 유의적으로 높게 나타났다. 모든 시험구에서 넙치 등근육의 유리아미노산 중 taurine, leucine, alanine, lysine이 공통적으로 높은 함량을 나타내었고, 공급한 사료에 따라 넙치 등근육의 유리아미노산에는 유의적인 차이는 없었다. 핵산관련물질 중 AMP의 함량은, FS20 및 FS30을 공급한 넙치 등근육에서 대조 배합사료를 공급한 것보다 유의적으로 높은 함량을 나타내었다. 이상의 결과로부터, 본 실험 사료조성으로 넙치 치어를 사육하였을 때 어분대체 단백질원으로서 발효대두박을 어분 단백질 함량기준으로 30%까지 대체 가능할 것으로 생각되었다.