Concrete using recycled aggregate instead of natural aggregate reduces environmental waste and is a future oriented material. However, use of the structure is limited to negative recognition of recycled aggregate quality. In this study, 50 MPa concrete was developed using recycled aggregate. In order to verify the possibility of using as a column member, we aimed to confirm the compressive behavior of RCFT (Recycled Concrete Filled Tube) columns filled with concrete using recycled aggregate. Circular type steel pipe was used, and concrete strength (30, 40, 50MPa) and mixing ratio were the experimental parameters. Through 72 specimen compression tests, 50MPa strength of recycled aggregate concrete was confirmed and stable behavior of 9 RCFT columns was confirmed.

목 적：고자장(3.0T) MRI에서 교정 후 잔존하는 강자성체 인공물에 대해 SEMAC 기법의 단계별 적용을 통하여 T1, T2 검사 시퀀스의 축상면 인공물의 장･단축 길이 감소 정도와 신호대 잡음비 측정을 통하여 인공물 감소를 위한 최적의 단계를 알아보고 임상에서 추가적인 검사 방법으로 적용하고자 한다. 대상 및 방법：3.0T MRI (MAGNETOM Skyra, Siemens, Munich, Germany)를 사용하여 자체 제작된 손목 (Wrist and hand) 팬텀 속에 치료용 보루스와 치과용 stainless steel wire (18 × 25 mm)를 삽입하여 고정하였다. 고신호 강도를 구현하기 위해서 두･부 전용 코일(64 channel)을 사용하여 검사를 진행하였 으며, 연구에 사용한 펄스 시퀀스는 T1 TSE, T2 TSE에 SEMAC 기법을 적용하였고, 추가적인 (additional) 위상 부호화 단계(phase encoding steps, PES)를 정성적(6-15), 정량적(6-10)까지 변화 시켜 10회 반복 측정하여 실험하였다. 정량적 평가는 영상 왜곡이 가장 심하게 일어난 부위(영상 18번)에 서 좌･우측으로 나누고 장･단축의 길이를 계측하였고, 인공물 영향이 없는 3곳을 좌･우측 각각 지정하여 신호대 잡음비(signal to noise ratio, SNR)를 계측하였다. 정성적 평가는 이미지의 질을 내･외부 평가 자 각각 3명이 영상 평가 기준에 맞춰 5점 척도화하여 평가하였다. 결 과：T2 SEMAC의 인공물에 대한 정량적 분석 결과는 PES가 6→7, 7→8, 8→9, 9→10 변화할 때 RT: 장축 길이는 0.11%, 0.02%, 0.10%, 0.02%로 감소, 단축 길이는 0.19%, 0.04%, 0.22%, 0.07%로 감 소하였다. LT는 장축 길이: 0.12%, 0.02%, 0.10%, 0.06%로 감소, 단축 길이: 0.20%, 0.09%, 0.18%, 0.3%로 감소하였다. T1 영상의 정량적 분석의 경우는 RT의 장축 길이: 0.17%, 0.01%, 0.11%, 0.01% 로 감소, 단축 길이는 0.14% 0.01%, 0.11%, 0.02%로 감소하였다. LT의 장축 길이: 0.20%, 0.01%, 0.09%, 0.01% 감소, 단축 길이: 0.13%, 0.03%, 0.11%, 0.01%로 감소되는 결과를 나타내었다 (p<0.01). T2(RT)의 신호대 잡음비 측정 결과 PES가 6-10까지 증가할 때 101.92, 105.25, 105.44, 104.44, 103.47, T2(LT): 95.30, 98.98, 97.22, 96.61, 95.74, T1(RT): 177.24, 175.50, 296.06, 299.88, 313.71이고, T1(LT): 159.67, 158.79, 246.75, 226.75, 259.67로 나타났다. 정성적 분석의 경우 T2 영상에서 5점 척도를 기준으로 SEMAC PES가 6- 15일 경우 1.50, 2.16, 2.16, 2.50, 2.83, 3.16, 3.33, 3.83, 4.50, 4.50점으로 내･외부 관측자가 영상을 평가하였고(p<0.01), T1 영상에서 6- 15일 경우 1.50, 2.16, 2.16, 2.33, 2.66, 3.33, 3.00, 3.66, 4.00, 4.16점으로 평가를 하였다 (p<0.01). 결 론：교정 후 치아의 유지를 위해 남아 있는 강자성체 인공물이나 불가피하게 두･경부에 잔존하는 물질로 인해 검사에 제한 사항이 발생을 할 경우 T2 SEMAC의 경우 PES 7, T1 SEMAC의 경우는 6-8(SNR, artifact, scan time 고려시: PES 8, PES 7, PES 6)을 권고한다. 본 연구에서 제시한 최적의 T1, T2의 SEMAC PES를 참고하여 임상에 적용한다면 기존 검사법과 비교 시 영상의 질 향상에 도움이 될 것이라 판단된다.

Unlike column-to-beam connections in reinforced concrete frames, column-to-beam connections are generally of the same type. Vertical load (D.L + L.L) and horizontal load (wind load, seismic load) are not the same in the upper and lower flange stress history. In the case of beams bonded to synthetic CFT columns, the tensile force is transmitted through the steel pipe column, and the compressive force is transmitted to the filled concrete, so the seismic performance is excellent even if the column has a relatively thin cross section. Also, in case of beam the composite CFT column, tensile force is taken by the steel pipe column, and the compressive force is caught by the inner concrete, and the shape of the column joint can be changed. In this study, the stress distribution of buildings is investigated according to the size and characteristics of the building, and the load history of the upper and lower flanges according to the building type is checked to show the structural possibility of the Asymmetric Diaphragms joint.

본 연구에서는 식품 및 화장품 원료로 널리 사용되는 천연 다당류의 분자 구조, 분자량, 점도, 친수성, 팽창, 습윤 및 보습 특성을 이용하여 도로 분진 방지제를 제조하였다. 다양한 분진 제어 효과가 확인되었으며 단순한 물 분사 및 시험 대조군인 합성PVA보다 우수한 결과를 얻었다. 또한 수분 증발 비교, 비산 저감율, 공사현장 테스트 및 물벼룩 급성 독성 시험 등의 영향을 연구하고 토양 및 수질의 안전성을 연구하여 도로 분진 방지제의 유용성을 확인하였다.

This study develops numerical model of mega composite columns in fire and investigates the residual areas using 500℃ isotherm method and residual capacity of mega composite columns after 3 hours. In order to perform heat transfer analysis, thermal properties of steels and concrete were adopted from Eurocodes. In addition to, the temperature distributions of composite columns with respect to fire tests were compared with numerical analysis results. As a result, residual capacity of mega composite column with 1m width remained more than 45%. The residual capacity of mega composite column was only increased to 2.3∼2.6% with the use of additional rebars.

Following the earthquake that shook the city of Gyeongju, Korea, in 2016, it became apparent that research on the safety of cultural heritages against the seismic hazards is necessary in Korea. Predictions of how historically significant stone pagodas would behave the earthquakes anticipated in near future, which are the subject of this study, is also required. In this study, the dynamic characteristics of 15 cultural heritage designated stone pagodas of Korea were investigated, including natural frequency and damping ratio, and the stiffness of the stone material and its contact area were determined using eigenvalue analysis by assuming the stone pagodas to be multi-degree-of-freedom structures. The results of this study enable the structural modeling of stone pagodas using a finite element analysis program and the method is expected to be useful in assessing the structural safety of stone pagodas against vertical loads as well as lateral forces, including earthquakes. Also, by identifying the dynamic characteristics of the structures, the results of this study can be utilized as a nondestructive testing method to determine the rigidity of cultural heritage structures and to identify inherent problems. The natural frequencies of the Korean stone pagodas were measured to be within 3.5~8.3㎐, excluding cases with distinct natural frequency results, and it was determined that the natural frequencies of the stone pagodas are influenced by various parameters including the height and joint stiffness of the structures.

This review summarizes the history of freshwater zooplankton research in Korean Society of Limnology and necessary future topics that are remain poorly investigated in South Korea based on main research topics of published articles focusing on lakes, reservoirs, rivers and wetland ecosystems. In Korea, a total 450 freshwater zooplankton species have been reported (85 species of cladocera, ca. 230 species of rotifera since 1939, and 138 species of copepoda), and they cover 10% of total zooplankton species list. In the present paper, we provide recent species list of zooplankton found in Korea and their taxonomic keys. Over periods of 45 years, there are 25 published papers for zooplankton biota in lentic ecosystems in Korean Journal of Ecology and Environment (KJEE). The ecology of zooplankton communities in rivers has focused on the mechanisms involved in regulating their abundance, diversity and spatio-temporal patterns of genus Bosmina and rotifers (genus Brachionus and Keratella) that are most frequently found from Korea. On the other hand, the studies on zooplankton in wetland has focused on Alona, Chydorus and Ceriodaphnia with special emphasis on their relationships with aquatic macrophytes. Even though studies on the freshwater ecosystem in Korea have a long history, a few of studies on zooplankton biota were conducted at rice paddy, Dumbeong and wetlands. During the last two decades, experimental advances in freshwater zooplankton ecology and understanding of structure and function of this biota were made from a series of articles mainly in journal of KJEE. For future studies, quantitative, experimental and interdisciplinary approaches would be key words to understand zooplankton ecology and their roles in aquatic ecosystems under changing environments, and we have suggested necessary zooplankton research fields and future directions.

목 적：본 연구는 업무 숙련도에 따라 요인별 추가검사나 재검사가 어떻게 발생하는지 분석하여 MRI 검사의 추가검사와 재검사를 낮출 수 있는 방안을 제시하고자 하였다. 대상 및 방법：연구방법은 2012년부터 2017년까지 6년간 서울소재 A 병원의 전체 MRI 검사건수를 집계한 다음 연도별 추가검사와 재검사의 발생을 분석하여 업무 숙련도에 따라 관련 요인별 재검사가 유의한 차이가 있는지 알아본 후 그에 따른 대안을 마련하였다. 결 과：연구결과, 업무 숙련도에 따른 추가검사와 재검사의 발생 건수는 장비, 환자, 검사자, 기타 요인 모두 MRI 검사업무를 시작한 1년차와 2년차에서 통계적으로 유의하게 많이 발생하였다. 결 론：결론적으로 MRI 검사업무를 시작한 1년차와 2년차의 업무수행능력을 향상 시킨다면 추가검사와 재검사의 발생을 획기적으로 줄일 수 있다.

This study was conducted to explore the effects of seeding rate of a seed mixture on grassland productivity and botanical composition. Seeding rates were composed of four different treatments varying by the amount of seed: T1, 50% decrease in seeding rate from standard; T2, standard seeding rate; T3, 50% increase in seeding rate from standard; and T4, 100% increase in seeding rate from standard. In 2016, seasonal changes in grass botanical composition revealed T2, T3, and T4 in portion of grass ratio were the highest with a range of 87–100%, whereas T1 was the lowest of all treatments. In 2017, the botanical composition in T1 showed that the grass ratio in of the first cutting was 91%, but in the fourth cutting its ratio decreased by 75%. The results from both years were combined for each treatment, T4 (11,435 kg ha-1) and T3 (11,162 kg ha-1) demonstrated the highest dry matter yield of the treatments (T1: 8,196 kg ha-1; T2: 9,521 kg ha-1) (p＜0.05). As a result, a 50–100% increase in the seeding rate from the standard demonstrated the best grassland yield and botanical composition.

As buildings are becoming larger, demand for mega-sized composite columns (over 1-meter diameter) is increased. We have developed and commercialized welded built-up CFT column (ACT Column I) since 2005 which are structurally stable and economical using cold-formed steel with rib. However, there has a limit in size of cross section (618˟618mm) by a fabrication facilities. And due to characteristics of closed cross section, there has a limit to construction of connection of moment frame. Composite mega column (ACT Column II) has same concept of forming closed cross section. But in order to enlarge cross sectional size, thick plate is inserted between cold-formed steels. Since composite mega column can control thickness and width of thick plate, steel or composite beams can be directly attached to the connection. In this study, we propose strength formula of composite mega column to beam connections with T-shaped stiffener as internal diaphragm and verified through finite element analysis and simple tensile experiment.

목적 : 뇌졸중 이후 우세손이 마비된 경우 기능회복 정도가 비우세손의 손상보다 더 높을 것이라는 관측이 존재하지만 이에 대한 국내 연구 자료는 부족하기 때문에 후향적 코호트 조사를 통해 우세손의 마비 유무에 따른 기능회복의 변화를 조사함으로써 작업치료 중재전략에 응용할 수 있는 자료를 제공하고자 한다. 연구방법 : 5개 의료기관에서 1차 대상자(n=205)를 모집한 후 일반적 특성 및 뇌졸중 관련 특성, 적용된 평가도구 등을 조사하고 발병일에서 초기평가일까지의 기간이 6개월 이내인 2차 대상자(n=122)를 선별하여 평가기록 자료를 수집하였다. 적용된 평가도구에 대한 빈도분석을 통하여 6개의 평가도구를 선정하였다(Modified Barthel Index; MBI, Maunual Function Test; MFT, Hand Strength Test; HST, Nine-Hole Pegboard test; NHP, Functional Independence Measure; FIM, Box and Block Test; BBT). 평가기록은 평가기간(초기, 3개월 후, 6개월 후)에 따라 자료를 수집한 후 통계학적 분석을 실시하였다. 결과 : HST, NHP, BBT에서 우세손 마비 유무에 따른 차이가 있었고(p<.001), MBI는 평가기간에 따른 차이만(p<.05) 보였으며 우세손 마비유무와 평가기간의 상호작용효과는 존재하지 않았다(p>.05). 우세손 마비 환자의 HST(lateral pinch, palmar pinch)와 BBT의 변화량은 비우세손 마비 환자보다 유의한 차이(p<.05)로 더 높았지만 그 외 평가결과에서는 통계학적 유의한 차이를 보이지 않았다(p>.05). 결론 : 본 연구를 통해 추후 뇌졸중으로 인한 편마비 환자의 다양한 작업치료 중재전략에 응용할 수 있을 것이라고 희망한다.

목 적：고자장(3.0T) MRI에서 교정 후 잔존하는 강자성체 인공물에 대해 SEMAC 기법의 단계별 적용을 통하여 T1, T2 검사 시퀀스의 축상면 인공물의 장･단축 길이 감소 정도와 신호대 잡음비 측정을 통하여 인공물 감소를 위한 최적의 단계를 알아보고 임상에서 추가적인 검사 방법으로 적용하고자 한다. 대상 및 방법：3.0T MRI (MAGNETOM Skyra, Siemens, Munich, Germany)를 사용하여 자체 제작된 손목(Wrist and hand) 팬텀 속에 치료용 보루스와 치과용 stainless steel wire (18 × 25 mm)를 삽입하여 고정하였다. 고신호 강도를 구현하기 위해서 두･부 전용 코일(64 channel)을 사용하여 검사를 진행하였으며, 연구에 사용한 펄스 시퀀스는 T1 TSE, T2 TSE에 SEMAC 기법을 적용하였고, 추가적인 위상 부호화 단계(phase encoding steps, PES)를 정성적(6-15), 정량적(6-10)까지 변화시켜 10회 반복 측정하여 실험하였다. 정량적 평가는 영상 왜곡이 가장 심하게 일어난 부위(영상 18번) 에서 좌･우측으로 나누고 장･단축의 길이를 계측하였고, 인공물 영향이 없는 3곳을 좌･우측 각각 지정하여 신호대 잡음비 (signal to noise ratio, SNR)를 계측하였다. 정성적 평가는 이미지의 질을 내･외부 평가자 각각 3명이 영상 평가 기준에 맞춰 5점 척도화하여 평가하였다. 결 과：T2 SEMAC의 인공물에 대한 정량적 분석 결과는 PES가 6→7, 7→8, 8→9, 9→10 변화할 때 RT 장축 길이는 0.11%, 0.02%, 0.10%, 0.02%로 감소, 단축 길이는 0.19%, 0.04%, 0.22%, 0.07%로 감소하였다. LT 장축 길이: 0.12%, 0.02%, 0.10%, 0.06%로 감소, 단축 길이: 0.20%, 0.09%, 0.18%, 0.3%로 감소하였다. T1 영상의 정량적 분석의 경우는 RT의 장축 길이: 0.17%, 0.01%, 0.11%, 0.01%로 감소, 단축 길이는 0.14% 0.01%, 0.11%, 0.02%로 감소하였다. LT의 장축 길이: 0.20%, 0.01%, 0.09%, 0.01% 감소, 단축 길이: 0.13%, 0.03%, 0.11%, 0.01%로 감소되는 결과를 나타내었다 (p<0.01). T2(RT)의 신호대 잡음비 측정 결과 PES가 6-10까지 증가할 때 101.92, 105.25, 105.44, 104.44, 103.47, T2(LT): 95.30, 98.98, 97.22, 96.61, 95.74, T1(RT): 177.24, 175.50, 296.06, 299.88, 313.71이고, T1(LT): 159.67, 158.79, 246.75, 226.75, 259.67로 나타났다. 정성적 분석의 경우 T2 영상에서 5점 척도를 기준으로 SEMAC PES가 6~15일 경우 1.50, 2.16, 2.16, 2.50, 2.83, 3.16, 3.33, 3.83, 4.50, 4.50점으로 내･외부 관측자가 영상을 평가하 였고(p<0.01), T1 영상에서 6~15일 경우 1.50, 2.16, 2.16, 2.33, 2.66, 3.33, 3.00, 3.66, 4.00, 4.16점으로 평가를 하였다(p<0.01). 결 론：교정 후 치아의 유지를 위해 남아 있는 강자성체 인공물이나 불가피하게 두･경부에 잔존하는 물질로 인해 검사에 제한 사항이 발생을 할 경우 T2 SEMAC의 경우 PES 7, T1 SEMAC의 경우는 6~8(SNR, artifact, scan time 고려시: PES 8, PES 7, PES 6)을 권고한다. 본 연구에서 제시한 최적의 T1, T2의 SEMAC PES를 참고하여 임상에 적용한다면 기존 검사법과 비교 시 영상의 질 향상에 도움이 될 것이라 판단된다.

In order to encourage collaboration with North Korea in astronomy research field, we have studied the astronomical almanacs published in South and North Korea. The almanac contains fundamental astronomical data including not only daily calendar data but also unique characteristics selected by necessity in each country. We compared the South and North Korean astronomical almanacs in terms of contents, detailed descriptions, unique items, and so forth. We used the 2017 almanac for South Korea and 1993 almanac which is useful for this research for North Korea. We found that there were several differences between South and North Korean almanacs. The North Korean almanac is published for the astronomer or navigator, thus it has supplementary information about spherical astronomy such as precession of the north pole and position of celestial bodies. Whereas the South Korean almanac is published for the general public, and it distinctively contains luni-solar calendar, 24 solar terms, national holidays, etc. This study could be helpful for research cooperation between South and North Korea in astronomy.

Polysulfone 수지를 사용한 그래핀 복합조성물을 제조하고, 이것들의 멤브레인에 대한 잔류응력과 열전도 특성을 분석하였다. 그래핀을 포함하는 polysulfone 멤브레인의 잔류응력분석은 Si (100) 기판에 스핀코팅으로 10 μm 두께의 막을 도포하여 준비한 시료를 대상으로 하였으며, 잔류응력의 측정은 온도를 승온하고 냉각하는 완전한 1주기 동안 수행하였다. 그래핀을 포함하는 polysulfone 평막을 증류수를 사용한 상전이법으로 제조하여 두께방향과 면방향으로 열전도도를 구분하여 각각 측정하였으며 평막시료의 열전도 이방성을 분석하였다. 그래핀의 구조적 특징에 의해 이를 포함하는 polysulfone 막의 잔류응력은 그래핀 함량이 증가함에 따라 점차로 완화되는 경향을 나타내었고, 열전도특성은 평막형성의 구조적 특성과 그래핀의 고유특성에 의해 두께방향과 면방향의 차이를 확인할 수 있었다.

In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

Background: The continuous co-contraction of the trunk muscles through trunk stabilization exercises is important to patients with lumbar spinal stenosis (LSS). However, intentional abdominal muscle contraction (IAMC) for trunk stabilization has been used only for specific training in the treatment room. Objects: The purpose of this study was to provide feedback to adults with LSS to enable IAMC during activities of daily living (ADLs). Methods: The participants with spinal stenosis were divided into an experimental group of 15 adults and a control group of 16 adults. Electromyographic signals were measured while the subjects kept their both hands held up at 90°. The measured muscles were the rectus abdominis (RA), external oblique (EO), internal oblique (IO), and erector spinae (ES). Pelvic tilt was measured using a digital pelvic inclinometer. The degree of pain was measured using the visual analogue scale (VAS) and functional capacity was measured using the Korean version of the Oswestry disability index (KODI). Results: While the experimental group showed statistically significantly higher activities in the RA, EO, and IO after the intervention compared with the control group. Pelvic tilt was significantly decreased only in the experimental group. Both the experimental and control groups exhibited statistically significant declines in the VAS and KODI (p<.01). In terms of the levels of changes, the experimental group exhibited a statistically significant larger decline only in the VAS and the pelvic tilt when compared with the control group (p<.05). Conclusions: The subjects could stabilize their trunks, and relieve their pain and dysfunctions and reduce pelvic tilt by learning abdominal muscle contraction during ADLs.

PURPOSES: This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS: First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS: After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at 60℃ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).

본 연구는 아스파라거스의 모의 수출 온도 조건에서 예냉 처리 및 MA 포장이 생체중 감소 및 색 변화와 같은 품질 변화에 미치는 영향을 알아보기 위해 수행되었다. 예냉 처리는 공랭식, 수랭식, 그리고 대조구인 예냉 무처리를 두었다. MA 포장은 산소투과도가 10,000cc·m-2 ·day-1·atm-1 OTR 필름을 사용하였고 유공 필름(관행 처 리)으로 포장한 대조구를 두었다. 모든 처리는 양구에서 일본의 시모노세키까지 수출 시 모의 유통 온도 조건을 적용하여 8oC에서 20시간 처리 후 저장 종료일까지 4oC 로 두었다. 아스파라거스의 예냉은 수랭식에서 빠르게 진행되었는데, 반 냉각 시간은 공랭식에서 12분, 수랭식 에서 15초였다. 예냉 처리 후 호흡률과 에틸렌 발생률은 수랭식에서 가장 낮았다. 저장 중 생체중 감소율은 관행 저장 예냉 무처리에서 약 11%로 가장 높았고, MA 포 장에서는 모든 처리가 0.5% 미만이었다. 포장 내 이산 화탄소와 산소 농도는 공랭식과 수랭식에서 아스파라거 스의 적정 CA/MA 조건을 유지하였다. 필름 포장 내 에 틸렌 농도는 예냉 처리에서 낮았다. 줄기의 경도는 MA 포장의 수랭식에서 가장 낮았다. 외관상 품질, 이취, 그 리고 hue angle 값은 MA 포장의 수랭식에서 가장 우수 하였다. 본 연구의 결과, 수랭식 및 MA 포장의 복합 처리는 수출 유통 과정에서 품질 유지에 효과가 있을 것 으로 기대된다.

There are various manufacturing processes for pure SiO2 that is used as abrasives, chemicals, filters, and glasses, and in metallurgy and optical industries. In the optical fiber industry, to produce SiO2 preform, SiCl4 is utilized as a raw material. However, the combustion reaction of SiCl4 has caused critical environmental issues, such as ozone deficiency by chlorine compounds, the greenhouse effect by carbon dioxide and corrosive gas such as hydrochloric acid. Thus, finding an alternative source that does not have those environmental issues is important for the future. Octamethylcyclotetrasiloxane (OMCTS or D4) as a chlorine free source is recently promising candidate for the SiO2 preform formation. In this study, we first conducted a vaporizer design to vaporize the OMCTS. The vaporizer for the OMCTS vaporization was produced on the basis of the results of the vaporizer design. The size of the primary particle of the SiO2 formed by OMCTS was less than 100 nm. X-ray diffraction patterns of the SiO2 indicated an amorphous phase. Fourier-transform infrared spectroscopy analysis revealed the Si-O-Si bond without the -OH group.