As the issue of microplastics (MPs) detection in tap water was raised in other countries in 2017, monitoring of MPs in drinking and source water, and sewage treatment plant (STP) effluents was initiated. This study intends to look into other studies on MPs in STPs at home and abroad, and review the characteristics of MPs and their removal efficiencies in the STPs, the risk and effect of MPs on watersheds, and management practices in order to help better understand MPs in STPs. To manage MPs effectively in STPs, it is necessary to investigate the detection of MPs discharged from STPs, do research on human health risk and control measures, and build a monitoring system including standardized analytical methods.

PURPOSES: The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS: Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS: The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

시설 토마토 온실에서 다양한 발광 램프가 장착된 트랩을 가지고 온실가루이의 유인 효과에 미치는 영향에 대하여 조사하였다. 설치된 램프의 종류는 청색, 황색 그리고 흰색 발광 램프가 장착된 트랩을 이용하였다. 실험 결과 청색 발광 램프가 설치된 트랩에서 110마리로 가장 많은 온실가루이 성충이 유인되었고 황색램프 트랩과 흰색램프 트랩에서는 각각 71마리와 45마리가 포획 되었다. 이때 청색 발광램프 트랩의 파장대역은 330nm에서 430nm를 나타내었다. 그러나, 황색광과 흰색광 발광램프 트랩에서도 청색광 램프의 파장대역을 가지고는 있었으나 한편으로 온실가루이가 회피하는 파장대역 또한 동시에 포함하고 있었다. 이 결과 이들 두 개의 트랩에서 보다 청색광 발광트랩이 유인 포획률이 높아 시설 토마토 온실에서 온실가루이의 방제와 예찰에 효과적으로 사용될 수 있을 것으로 판단되었다.

To obtain basic data on bioaerosols in the indoor environments of houses located adjacent to Gwangyang Iron Works, the concentration and diversity of indoor air molds were comparatively investigated in 33 houses in September of 2016 and 2017, respectively. In areas both adjacent to and nonadjacent to Gwangyang Iron Works, house temperature and humidity ranged from 24~28oC and 47~57%, respectively. Airborne mold concentration was higher in the houses located nonadjacent than in the ones adjacent to the iron works. Interestingly, the level of airborne mold concentration exceeded 500 CFU/m3 in all houses nonadjacent to the iron works. A total of 12 mold species including five pathogenic species were indentified from the investigation. Among the five pathogenic species, the causal agents of otomycosis, Alternaria alternata, Aspergillus fumigatus, and A. niger were present. Overall, Cladosporium cladosporioides was the dominant species. This is the first report on the concentration and diversity of airborne mold in houses located adjacent and nonadjacent to Gwangyang bay industrial complex in Korea.

This study was conducted to investigate whether dietary levels of copra and palm meals affect the growth performance, carcass characteristics, and meat properties of Hanwoo steers. Eighty-one Hanwoo steers were randomly assigned to one of three dietary groups: T1 (conventional level of palm and copra meals), T2 (20% copra meal and 15% palm meal), and T3 (30% copra meal and 20% palm meal). During the growing and early fattening periods, the average daily gains and formula feed intakes of T2 and T3 were higher than that of T1; however, those differences were not statistically significant. The dietary levels of copra and palm meals did not affect carcass weight, back fat thickness, and rib-eye areas. Marbling scores and meat quality grades were lower in T3 than in T1 and T2; however, those differences were not statistically significant. Meat color, fat color, texture, and maturity were similar among the treatment groups. In addition, dietary levels of copra and palm meals did not affect the chemical and fatty acid composition of longissimus dorsi muscles in Hanwoo steers. Thus, the present results indicate that high supplementation levels of copra and palm meals do not negatively affect the growth performance, carcass characteristics, and meat properties of Hanwoo steers.

본 연구는 2006년부터 2016년 사이에 강원도 축산기술연구소에서 출생한 한우 송아지 1,069두로부터 조사된 이유시 체중과 임신기간, 생시체중 및 포유기 일당증체량 및 이유시 체중을 이용하여 단순상관, 다중 회귀 및 경로분석 등을 통해 이유시 체중과 임신기간, 생시체중 및 포유기 일당증체량 간의 상관 관계를 규명하였다. 통계분석은 조사된 원 성적을 이용하여 실시하는 동시에 조사된 원 성적을 송아지 출생 연도-계절, 송아지의 성, 어미의 산차 및 이유일령(포유기 일당증체량과 이유시 체중에만 해당) 등과 같은 환경효과에 대해 보정한 값인 잔차를 이용해서도 실시하였다. 조사된 형질들 간의 상관계수는 모두 양수였는데, 임신기간은 생시체중과의 잔차상관계수가 +0.315로서 중정도 크기였던 반면 포유 기 일당증체량이나 이유시 체중과의 잔차상관계수는 각각 +0.039와 +0.130으로서 작거나 0에 가까운 값이었다. 이유시 체중은 포유기 일당증체량과의 잔차상관계수가 +0.949로서 생시체중과의 상관계수인 +0.323보다 컸다. 잔차를 이용한 경로분석 결과 이유시 체중의 변이에 미치는 임신기간, 생시체중 및 포유기 일당증체량의 전체 기여도는 각각 0, 0.095 및 0.892로 나타났다. 본 연구 결과, 임신기간, 생시 체중 및 포유기 일당증체량 중에서 포유기 일당증체량이 이유시 체중의 변이에 가장 큰 영향력을 미치는 형질인 것으로 나타났다.

This study aimed to produce high-quality blastocysts and establish appropriate microinjection conditions for the introduction of target gene. First, we identified embryo development to the blastocyst stage after microinjection using the CRISPR/Cas9 system on the Cas9 protein or mRNA. As a result, we confirmed that blastocyst development in the Cas9 mRNA injected group significantly increased when compared to the Cas9 protein injected group (p<0.05). However, the blastocyst gene targeting rate increased in the Cas9 protein injected group when compared to the Cas9 mRNA injected group (p<0.05). Next, we treated the injection medium with 10 μg/ml of cytochalasin B (CB), and the microinjected embryos were cultured in CR1-aa medium supplemented with 0.1 μM of melatonin (Mela). Consequently, the blastocyst formation rate significantly increased in the CB treated group (p<0.05). After microinjecting embryos with the CB treated injection medium, we investigated blastocyst formation and quality via Mela treatment. Consequently, the Mela treated group demonstrated significantly increased blastocyst formation rates when compared to the non-treated group (p<0.05). Furthermore, immunofluorescence assay using RAD51 (DNA repair detection protein) and H2AX139ph (DNA damage detection protein) showed an increase in RAD51 positive cells in Mela treated embryos. Therefore, we verified the improvement in knock-in efficiency in microinjected bovine embryos using Cas9 protein. These results also demonstrated that the positive effect of the CB and Mela treatments improved the embryonic developmental competence and blastocyst qualities in genetically-edited bovine embryos.

The reproduction characteristics of hagfish Eptatretus burgeri were examined using individuals caught in the South Sea of Korea. The spawning season and size at minimum sexual maturity of this species were characterized based on a gonad-somatic index (GSI) and monthly variation egg size (long axis). From monthly variation of GSI, the spawning season was estimated to be from August to September. Developing eggs larger than 10 mm were found in March, and the largest egg size was found in July. The first spawning length was 34.2 cm TL. Batch fecundity ranged from 13 to 117 eggs for hagfish sized from 34.2 cm TL to 77.0 cm TL, respectively, and increased linearly with total length.

Acoustic surveys were conducted in the seas surround the South Korea (South Sea A, South Sea B (waters around the Jeju Island), West Sea and East Sea) in spring and autumn in 2016. First, the vertical and horizontal distributions of fisheries resources animals were examined. In most cases vertical acoustic biomass was high in surface water and mid-water layers other than South Sea A in autumn and West Sea. The highest vertical acoustic biomass showed at the depth of 70-80 m in the South Sea A in spring (274.4 m2/nmi2) and the lowest one was 10-20 m in the West Sea in autumn (0.4 m2/nmi2). With regard to the horizontal distributions of fisheries resources animals, in the South Sea A, the acoustic biomass was high in eastern and central part of the South Sea and the northeast of Jeju Island (505.4-4099.1 m2/nmi2) in spring while it was high in eastern South Sea and the coastal water of Yeosu in autumn (1046.9-2958.3 m2/nmi2). In the South Sea B, the acoustic biomass was occurred high in the southern and western seas of Jeju Island in spring (201.0-1444.9 m2/nmi2) and in the southern of Jeju Island in autumn (203.7-1440.9 m2/nmi2). On the other hand, the West Sea showed very low acoustic biomass in spring (average NASC of 1.1 m2/nmi2), yet high acoustic biomass in the vicinity of 37 N in autumn (562.6-3764.2 m2/nmi2). The East Sea had high acoustic biomass in the coastal seas of Busan, Ulsan and Pohang in spring (258.7~976.4 m2/nmi2) and of Goseong, Gangneung, Donghae, Pohang and Busan in autumn (267.3-1196.3 m2/nmi2). During survey periods, fish schools were observed only in the South Sea A and the East Sea in spring and the West Sea in autumn. Fish schools in the South Sea A in spring were small size (333.2 ± 763.2 m2) but had a strong SV (–49.5 ± 5.3 dB). In the East Sea, fish schools in spring had low SV (–60.5 ± 14.5 dB) yet had large sizes (537.9 ± 1111.5 m2) and were distributed in the deep water depth (83.5 ± 33.5 m). Fish schools in the West Sea in autumn had strong SV (–49.6 ± 7.4 dB) and large sizes (507.1 ± 941.8 m2). It was the first time for three seas surrounded South Korea to be conducted by acoustic surveys to understand the distribution and aggregation characteristics of fisheries resources animals. The results of this study would be beneficially used for planning a future survey combined acoustic method and mid-water trawling, particularly deciding a survey location, a time period, and a targeting water depth.

촉진수송막이란 특정기체의 이동을 촉진시키기 위한 운반체를 포함하고 있는 분리막을 말하며 일반적으로 올레핀/파라핀 분리에는 π-complexation을 할 수 있는 은이온이 운반체로 사용된다. 본 연구에서는 올레핀/파라핀 분리를 위해 은이온이 함침된 아민계 고분자를 이용하여 촉진수송막을 제조하였고 이들의 프로필렌/프로판 분리특성을 알아보았다. 순수가스 테스트를 통해 압력변화에 따른 투과도와 선택도를 구하였으며, 혼합가스 테스트를 통해 stage-cut에 따른 투과측 프로필렌 농도 및 회수율 변화를 알아보았다. 그 결과, 2bar, 25°C에서 95%의 프로필렌을 99.6%까지 농축 시킬 수 있음을 확인하였다.

철강 산업에서 발생하는 COG 부생가스에는 수소가 메탄, 질소, 황화수소, 분진 등과 함께 100만 톤 정도가 다성분의 혼합가스로 포함되어 있으나 경제적인 수소 분리기술이 부족하여 주로 저부가가치의 발전용으로 사용되고 있다. 본 연구에서는 COG 부생가스내 수소를 회수할 수 있는 비대칭 구조의 폴리이미드 중공사막의 제조를 연구하였다. 이를 위해 지환족 다이안하이드를 사용한 유기용매에 대한 용해성이 높은 폴리이미드 소재를 합성하여 수소, 메탄, 질소, 산소 등의 기체투과특성을 확인하였고 그 중 가장 수소 선택성이 높은 DOCDA-ODA를 이용하여 용해성 폴리이미드를 합성하였다. 확보된 폴리이미드를 이용해 건습식 방사법에 의한 중공사막을 제조하였다.

이산화탄소 분리막은 이산화탄소에 대한 선택성이 우수하면서도 투과성이 뛰어나야 그 성능을 제대로 발휘할 수 있는데, 대부분의 고분자 분리막들은 투과도 및 선택도에 있어 매우 뚜렷한 상충관계를 보이고 있으며, 이러한 상충관계를 극복할 수 있는 고투과성 및 고선택성을 갖는 분리막의 개발이 시급하다 할 수 있다. 근래 PEG (polyethylene glycol)가 이산화탄소에 대한 투과선택도가 뛰어난 것이 밝혀져 많은 연구가 진행되고 있으며, 본 연구는 이에 더해 내구성이 우수한 표면고착된 PEG 함유 고분자 복합막을 제조하여 이의 이산화탄소에 대한 분리에 대하여 발표한다.

본 연구는 저온기 시설 딸기재배에서 연소식 탄산가스 발생기를 이용한 재배효과를 구명하기 위하여 수행하였다. 시설내부 일중 탄산가스 농도는 6시에서 11시 사이에 대조구가 210~600μmol·mol-1 이었고, 탄산가스 시용구는 800~1,100μmol·mol-1 이었다. 그 외 시각에서는 대조구와 유사한 분포를 나타내었다. 온실내 온도는 연소 방식 탄산가스 시용구는 오전 6시 ~ 10시 대조구에 비 해서 1~3oC 높았다. 11시 이후에는 대조구와 차이가 없었다. 초장, 엽장, 엽폭, 관부직경, 생체중, 건물중 등 생육은 처리 간 차이가 없었다. 상품수량은 대조구 3,612kg에 비해서 탄산가스 공급하는 것이 4,131kg으로 519kg 더 무거웠으며 탄산가스 발생기에서 총수량이 대조구에 비해서 17%가 증수 되었다.

This study aimed to investigate the feasibility of improving dewaterability and settleability of sewage sludge using coagulation sludge. When mixed with sewage sludge and coagulation sludge at 1:1 ratio, capillary suction time(CST) and specific resistance to filtration(SRF) decreased by about 56% and 68%, respectively. It is found that total solids(TS) and volatile solids(VS) of mixing sludge are increased by about 59% and 53%, respectively. Also, the turbidity of the mixing sludge supernatant was reduced from 99 to 16 NTU. It is observed that the mixing of sewage sludge and coagulation sludge at 1:1 showed better effect than using poly-aluminum chloride(PAC) coagulant at 25 mg/L.

In order to solve the limitation of the long span arch structures, a numerical analysis was carried out to investigate the effects of embedded trench installation technique to the earth pressure of an underground arch-rib shaped structure. For the arch-rib shape, the parabolic curve and the circular shape were analyzed according to the span-rise ratio varying from 0.1 to 0.5. The finite element analysis program, ABAQUS (2016), was used to consider the soil - structure interaction. The results from the analysis was verified through comparison with the existing Geofoam application technique.

PURPOSES: The purpose of this research is to analyze the characteristics of panels that affect the evaluating results of riding quality and to evaluate the appropriateness of roughness management criteria based on ride comfort satisfaction. METHODS: In order to analyze the influence of panel characteristics of riding quality, 33 panels, consisting of civilians and experts, were selected. Also, considering the roughness distribution of the expressway, 35 sections with MRI ranging from 1.17 m/km to 4.65 m/km were selected. Each panel boarded a passenger car and evaluated the riding quality with grades from 0 to 10, and assessed whether it was satisfied or not. After removing outlier results using a box plot technique, 964 results were analyzed. An ANOVA was conducted to evaluate the effects of panel expertise, age, driving experience, vehicle ownership, and gender on the evaluation results. In addition, by using the receiver operating characteristics (ROC) curve, the MRI value, which can most accurately evaluate the satisfaction with riding quality, was derived. Then, the compatibility of MRI was evaluated using AUC as a criterion to assess whether the riding quality was satisfactory. RESULTS: Only the age of the panel participants were found to have an effect on the riding quality satisfaction. It was found that satisfaction with riding quality and MRI are strongly correlated. The satisfaction rate of roughness management criteria on new (MRI 1.6 m/km) and maintenance (MRI 3.0 m/km) expressways were 95% and 53%, respectively. As a result of evaluating the roughness management criteria by using the ROC curve, it was found that the accuracy of satisfaction was the highest at MRI 3.1-3.2 m/km. In addition, the AUC of the MRI was about 0.8, indicating that the MRI was an appropriate index for evaluating the riding quality satisfaction. CONCLUSIONS: Based on the results, the distribution of the panels’age should be considered when panel rating is conducted. From the results of the ROC curve, MRI of 3.0 m/km, which is a criterion of roughness management on maintenance expressways, is considered as appropriate.