This study investigated the surface tension and foaming properties of the hot-water extracts of pumpkin leaf and chickpea, as well as the effects of the plant hot-water extracts on white pan bread baking. Propylene glycol alginate (PGA), a synthetic emulsifier widely used in bakery, was used as a control. Pumpkin leaf water extract showed lower surface tension and comparable foaming capacity, compared with chickpea water extract and PGA solution when total solid  0.15% (w/w). Chickpea water extract showed the highest foam stability when total solid  0.15% (w/w). The dough was found to have a weak gel structure, and its viscoelastic properties were not significantly influenced by adding 0.05% or 0.15% (w/w) (based on total solid content) plant water extracts or PGA. The specific volume of the bread increased, and the baking loss was reduced by adding the two plant water extracts of total solid 0.15% (w/w). The hardness and chewiness of the bread crumb were reduced to a level comparable to the crumb containing 0.05% (w/w) PGA. The results showed that the pumpkin leaf water extract could be an effective natural emulsifier with a high phenolic content for bakery products.

빵의 소비가 증가함에 따라 제빵 성능을 향상시킬 수 있는 기술은 제빵 산업에서 중요한 주제가 되고 있다. 활성글루텐(vital gluten)은 밀가루에 물을 첨가하여 전분을 제거한 후 글루텐만을 건조시킨 단백질이다. 품질이 낮은 밀가루에 활성글루텐을 첨가하면 반죽에 탄성과 신장성을 부여하여 제빵성능을 향상할 수 있다. 현재 제빵 산업에서 활성글루텐이 많이 활용되고 있지만 이들의 화학적, 물리화학적 특성 및 품질 평가에 필요한 품질 파라미터들에 대해 이해가 부족한 실정이다. 본 총설에서는, 활성글루텐의 품질을 예측하기 위한 파라미터의 이해를 돕기 위하여 밀 글루텐 단백질의 종류와 역할, 밀 반죽에서 형성되는 글루텐 네트워크, 밀가루 품질에 영향을 미치는 요인, 활성글루텐의 제조공정, 활성글루텐의 품질에 영향을 미치는 요인, 마지막으로 활성글루텐의 물리적 특성을 효과적으로 평가할 수 있는 글루토피크(Glutopeak)에 대해 설명하고자 한다. 본 총설을 통해 반죽 리올로지 특성과 제빵 성능에 영향을 미치는 활성글루텐의 품질 파라미터를 이해하고, 제빵 산업에서 활용할 수 있도록 도움이 되길 기대한다.

본 연구는 구운 횟수에 따른 죽염의 미네랄 농도변화와 항우식 효과를 확인하기 위하여 수행하였다. 미네랄 변화는 9회 죽염에서 Na, K, Mn 그리고 Fe이 높게 나타났으며, Mg, Ca 및 SO4는 1회 죽염에 서 가장 높았다. 구강 병원균 2종에 대한 최소억제농도 측정 결과 S. mutans에 대한 죽염의 MIC는 25mg/mL으로 나타났으나 S. sanguinis에 대한 죽염의 MIC는 50mg/mL로 S. mutans에 대한 항균효 과가 S. sanguinis보다 높은 것으로 나타났으며, 2종의 균주 모두에 대해 천일염보다는 죽염의 항균효 과가 더 높은 것으로 나타났다. 더욱이, 3%의 죽염에서 구강 내 pH 환경이 pH≥5.5로 오래 지속되는 것으로 나타났다. 따라서, 본 연구 결과는 죽염이 치아우식과 치주질환을 감소시키는데 유용할 것이라 생각될 수 있겠으나 보다 세밀한 추가 연구가 진행되어야 할 것으로 판단된다.

Baking characteristics of gluten-free rice bread were investigated, when 20, 30, 40, 50 and 60℃ water was added during mixing. The temperature of the dough before fermentation was affected by the temperature of the water and the mixing time. When 60℃ water was added, the specific gravity of the dough was the highest before fermentation (p<0.01). The specific gravity of the dough after fermentation was 32~39% of the specific gravity of the dough before fermentation. When 50℃ water was added, the volume and the specific volume of rice bread were higher than those in addition of water at other temperatures (p<0.001). In case of adding water of 50℃, the shape of the rice bread showed the largest volume, high appearance and a round shape. After storage for 2 and 24 hours, the addition of water of 50℃ resulted in the lowest hardness and chewiness values of rice bread. The sensory descriptive analysis revealed that when 50℃ water was added, the air cell size, springiness and hardness values of gluten-free rice bread were lower than those in addition of water at other temperatures. There was a difference in the appearance and texture of gluten-free rice bread, when 20, 30, 40, 50 and 60℃ water was added during mixing.

The effects of mixing speed (3, 6 and 10 speed) and time (2, 5 and 10 min) on the dynamic viscoelasticity of dough and the baking properties of gluten-free rice bread were investigated. The specific gravity of the dough was not affected by the mixing speed and time before and after fermentation. The elasticity (G') and viscosity (G") of the dough increased and the tan δ (G"/G') decreased with higher mixing speeds and longer mixing times. The specific volume of the gluten-free rice bread was affected by the mixing time in response surface methodology (RSM). The hardness of the gluten-free rice bread showed a decreasing trend as the specific volume for the gluten-free rice bread increased. The appearance of the gluten-free rice bread was symmetrical at high mixing speeds and long mixing times. Overall results indicated that the quality of gluten-free rice bread could be improved by controlling the mixing speeds and mixing times for the dough.

The baking properties of gluten-free rice bread with different percentages of corn starch and waxy corn starch were investigated. The specific gravity and color (L, a, b) of the dough as well as the appearance, color (L, a, b) and texture of the rice bread were analyzed. Replacement of rice flour with 1, 2.5, 5, 7.5 and 10% corn starch did not have a significant effect on the specific gravity and color of the dough. The volume and specific volume of the rice bread showed an increasing trend as the amount of added corn starch increased. The chewiness, gumminess and hardness of the rice bread showed a decreasing trend as the amount of added corn starch increased. Replacement of rice flour with 1, 5 and 10% waxy corn starch did not have a significant effect on the specific gravity and color of the dough. The color of the rice bread showed an increasing trend as the amount of added waxy corn starch increased. These results suggest that replacement of rice flour with 7.5% corn starch or 1% waxy corn starch is effective for gluten-free rice bread.

본 연구는 Par-baked 미트파이 제조에 있어서 외피 특성과 굽는 조건 및 해동 조건이 Par-baked 미트파이 특성에 미치는 영향을 평가하였다. 미트파이 외피제조에 적합한 적정 가수량은 33%였으며, 적정 숙성시간은 한 시간이 적당하였다. Par-baked 미트파이를 위한 굽는 시간은 210℃에서 1차 굽기가 12분, 2차 굽기는 9분이 적당하였으며, 해동시간은 Par-baked 미트파이 특성에 영향을 미치지 않았다. 국내산 밀가루와 강력분이 중력분과 박력분에 비하여 Par-baked 미트파이 제조에 적합하였기 때문에 단백질 함량과 질적 특성이 빵용에 적합한 국내 밀 품종이 적합할 것으로 생각된다.

In this study, Astragalus membranaceus powder was added (3, 6, 9%) during yeast bread preparation and its effect on product quality was examined. The results showed that the dough pH increased as the Astragalus membranaceus powder content increased. However, dough volume during fermentation did not differ significantly among the samples. Bread volume decreased (p<0.001) with an increasing amount of Astragalus membranaceus powder. Also, as the Astragalus membranaceus powder content increased, the Hunter’s color ‘L’ value of the crust decreased and the ‘a’ value increased, and for the crumb, the ‘L’ value decreased and the ‘a’ value increased. Textural property analysis indicated that hardness increased with an increasing amount of Astragalus membranaceus powder. However, up to the 6% level, there were no sensory attribute differences among the samples.

The effects of Japanese apricot(Prunus mume Sieb. et Zucc.) flesh on baking properties of white breads were investigated by evaluation of specific loaf volume, pH, acidity, rheological property, color and sensory quality. Bread was processed by adding 4.7%, 9.4%, 14.1% and 18.8% of Japanese apricot flesh to basic formulation. The compositions of Japanese apricot flesh were 88.19% moisture, 0.45% crude ash, 4.10% dietary fiber, 4.04% citric acid and 0.41% total sugars. The specific loaf volume of the breads was decreased from 3.274mL/g to 1.857mL/g as Japanese apricot flesh contents increased from 0% to 18.8%. The pH of the breads decreased but the acidity of those increased as the percentage of Japanese apricot flesh to wheat flour increased. Lightness(L value) of the breads decreased by the addition of Japanese apricot flesh, while yellowness(b value) and redness(a value) increased. Texture measurement showed that springiness, cohesiveness and resilience decreased with increase of Japanese apricot flesh contents. While, hardness, gumminess and chewiness were the lowest in the bread with 9.4% Japanese apricot flesh, and increased in the bread with 4.7%, 14.1% and 18.8% Japanese apricot flesh contents. In sensory evaluation, the highest sensory scores for flavor, taste, aftertaste and overall acceptability were obtained when Japanese apricot flesh content was 4.7%, and softness and chewiness was the best when 9.4% of Japanese apricot flesh was added. The moisture content of the breads containing Japanese apricot flesh was higher than that of the control to add no flesh during storage at 25℃. Based on physical, rheological and sensory evaluation, addition of 4.7~9.4% Japanese apricot flesh suggested to be acceptable for processing bread.

Physicochemical and consumer acceptance properties of bread baking prepared with 100% domestic and imported flour and mixtures of the two flours by 50% to 50% were investigated in this study. Quality changes of the breads during storage at 1℃ were also evaluated. Volume of bread made of the mixtures of flour showed significantly higher values than the other two samples. Hardness of bread made with domestic flour had significantly higher value than that of control on the first day of storage at 4℃. However, mixture sample showed significantly higher value than that of control after the third day of storage. Consumer acceptance test indicated that the bread prepared with 50% imported and 50% domestic flour were not significantly different from the bread prepared with 100% imported flour.

The baking property, chemical composition, instrumental characteristics and sensory quality of yeast breads containing various mixing percentage of Job's-tears flour with wheat flour were studied. The loaf volume and baking quality of the yeast bread made from mixing of 30% Job's-tears flour were similar to those of wheat flour bread. The contents of crude protein, crude fat, and crude ash in Job's-tears flour breads were much higher than those of wheat flour bread. Instrumental rheological characteristics of the yeast breads were measured with a Texture Analyzer. As the addition level of Job's-tears flours increased, hardness of the yeast breads increased but fracturability, adhesiveness, springness, cohesiveness, gumminess, chewiness and resilience decreased. The results of sensory evaluation revealed that Job's-tears flour was added to wheat flour at a replacement level of 10% without a large adverse effect on flavor, taste, mouthfeel and aftertaste.

baking 전후의 금선의 접합강도 변화를 연구하였다. 금선을 이용하여 Si 칩의 AI 패드와 은도금된 리드프레임 사이를 thermosonic 방법으로 본딩하였다. 본딩된 금선을 175˚C에서 시간을 변화시키면서 baking 처리하였다. 접합강도는 와이어 풀 테스트, 볼 전단 테스트, stud 풀 테스트로 평가하였다. 와이어 풀 접합강도는 baking 처리를 거쳐도 크게 변화하지 않았지만 파괴 유형이 baking 전에는 볼목 파괴에서 baking 후 스티치 파괴로 바뀌었다. 본딩과 baking 중 금선의 결정립이 크게 성장하였는데 이런 결정립 크기 변화와 금선 접합 부위의 기하학적인 모양에 따라 파괴 유형이 바뀌었다.