The germination characteristics of the resting cysts of Pheopolykrikos hartmannii collected from the southern coastal sediments of Korea were studied at different temperature conditions, and the morphology and phylogeny of the germlings were examined. The resting cysts of Ph. hartmannii were round and characterized by a red accumulation body and many arrow-like spines and could germinate at temperature of 10 to 30°C. High germination rates (>90%) were observed at 15 and 20°C, indicating that the resting cysts could act as seed populations for the bloom initiation of Ph. hartmannii in Korean coastal waters in early summer or early fall. The morphology of the germlings was generally consistent with the previous description, and an apical groove characterized by a fully enclosed loop was observed. Phylogenetic analysis based on large SubUnit (LSU) rRNA gene sequences revealed that the germlings shared an identical sequence with the Korean and American isolates of Ph. hartmannii and was a sister clade of Polykrikos species.

The community temperature index (CTI) reflects the temperature and environmental preferences of the community. We investigated the distribution patterns of major aquatic insect assemblages (Ephemeroptera, Plecoptera, and Trichoptera; EPT) based on CTI in streams of South Korea. We selected unpolluted 151 study sites at upper streams (less than 3rd) with less than 1.5 mg L-1 of biochemical oxygen demand. Study sites were clustered into six groups based on the similarities of their EPT composition. All three orders showed a continuous decrease in the number of species as CTI increased, especially in Plecoptera. In addition, the functional feeding groups were also significantly changed according the CTI changes. Temperature tolerance range of each group’s indicator species varied according to the CTI of the group. Finally, changes of CTI reflected differences of EPT assemblages according to the differences of environmental condition including temperature. Therefore, CTI can be applied to the evaluation and preservation of stream ecosystems and prediction of community changes due to climate change.

This study was carried out to investigate how airborne bacteria are distributed under different temperature conditions while cultivating oyster mushrooms by setting the indoor temperature of the cultivation room to 10°C, 15°C, 20°C, 25°C, and 30°C. The surveys were conducted in April and May, respectively. Airborne bacterial concentrations were distributed in the range of 1.61 × 102 ~ 3.67 × 102 CFU/m3 in April and 5.47 × 102 ~ 7 × 103 CFU/ m3 in May. In May, the indoor air quality maintenance standard (8.0 × 102 CFU/m3) was exceeded in the 10°C, 20°C, and 25°C cultivation rooms. Bacterial concentrations increased significantly in May compared to April. Bacterial concentrations were different between the cultivation rooms at different temperatures. The difference was more pronounced in May than in April. A total of 15 genera and 20 species were isolated from the indoor air of the oyster mushroom cultivation rooms. Overall, it was most abundant in Actinomycetia. Among the species identified, Agrobacterium radiobacter, Brevundimonas vesicularis, Kocuria palustris, K. salsicia, Lysinibacillus fusiformis, and Sphingobacterium siyangense are known to affect human health. This is the first report of airborne bacteria in cultivation rooms at different temperatures used for oyster mushroom cultivation. The results of this study are expected to be used as basic data to understand the indoor environment of thermophilic mushroom cultivation facilities.

The purpose of this study was to investigate the effects of root zone temperatures (RZT) on the germination of bell peppers and tomatoes. Bell peppers and tomatoes had the highest germination rates (85% and 90%, respectively) at 25oC air temperature. Besides, the first germination of bell peppers was shifted by one day ahead. Bell peppers had the highest germination rate of 72,100, and 100%, respectively, when the RZT was adjusted to 30oC at airtemperature of 20, 25, and 30oC, and when the air temperature was adjusted to 35oC, the germination rate was the highest (70%) when the RZT was 15oC. Tomatoes had the highest germination rate at 20oC of the RZT at all atmospheric temperatures. A local cooling and heating system was established to improve the germination rate by controlling the RZT during the low and high temperature period. The optimum RZT for seedlings during the low and high temperature period was investigated.

Pleurotus species are the most consumed and cultivated mushrooms in Korea. Although oyster mushrooms (P. ostreatus) can be cultivated automatically, their storability is slightly lower than that of king oyster mushrooms (P. eryngii) and winter mushrooms (Flammulina velutipes); therefore, the export proportion of oyster mushrooms is very low. Since Korean mushrooms are highly preferred across Southeast Asian, the export of oyster mushrooms in the form of complete substrates is expected to be more promising than that of fresh mushroom. Here, 1 and 2.5 kg complete substrates of P. ostreatus ‘Soltari’ and P. sajor-caju ‘Sambok’ were prepared and stored at different temperature from 0 to 15°C for 10 days. Thereafter, the formation of fruiting bodies was induced. Since the 2.5 kg complete substrates required 70 days of incubation, their mycelia were at an advanced age and their fruiting bodies did not grown normally. When 70%-incubated complete substrates were stored at 5–10°C, the growth was faster and more uniform and stable fruiting bodies were formed. Export test of complete substrates to Vietnam using distribution containers set at 0°C and 15°C revealed that the growth period was shortened by 1–2 days when the distribution containers were set at 15°C and the yield of ‘Soltari’ increased by approximately 10%. In addition, even though the yield of ‘Sambok’ was similar between treatments at 0°C and 15°C, the quality of fruiting bodies from 15°C-distributed complete substrates was much better than that of those from 0°C-distributed substrates.

To elucidate how cultivation temperature affected various traits including pileus color, yield and morphology of Pleurotusspp. Main results were as follows. Pileus lightness of all cultivars of Pleurotustested became higher as cultivation temperature increased, while those of Santari, Hwang-geumsantari and Sunjung at 21oC were lower than at 18oC. Redness and yellowness of pileus decreased as cultivation temperature increased; those of chromatic pileus cultivars showed noticeable difference. Yellowness of cultivar with chromatic pileus was higher than that of cultivar with achromatic pileus. Yield was increased as cultivation temperature increased, Wonhyeung 1ho; low temperature favored cultivar showed high yield when it was cultivated at low temperature andno fruiting body at 21oC. Valid number of stipes were generally higher at 18oC, and its correlation coefficient with yield was low. Length and stipe thickness changed consistently (larger and thicker) upon cultivation temperature; the coefficient of determination(R2) 0.514 for lengthof Heuktari and 0.963for stipe thickness of Santari were high. Correlation coefficient of one trait was highly related with multiple traits. In the future, we will conduct research on the changes of expressed genes involved in the pigments for pileus color by RNA expression analysis.

목적 : 온도감응성 나노구조체를 제조하고 이를 적용하여, 보관시에는 항생제가 용출되지 않고, 안구착용시에 만 온도감응성으로 항생제를 용출하는 스마트 콘택트렌즈를 제조하고자 한다. 방법 : 에멀젼중합하여 p(NIPAAm)-기반의 나노구조체를 합성하였고, 이를 샌드위치 공법을 통해 콘택트렌즈 에 도입하였다. Soaking 방법을 통해 항생제인 levofloxacin(LVF)를 콘택트렌즈에 탑재하여 온도에 따라 항생제 용출 특성을 분석하였다. 결과 : sodium n-dodecyl sulfate (SDS) 마이셀 템플레이트를 활용한 에멀젼중합을 통해 20-40 nm 크기의 온도감응형 p(NIPAAm)-기반의 나노구조체를 합성하였고 이는 TEM과 입도분석기를 통해 확인하였다. 샌드위치 공법을 통해 콘택트렌즈에 나노구조체를 도입하였고, soaking 방법을 통해 항생제를 렌즈안의 나노구조체에 탑재 하였다. 25 oC와 35 oC에서 각각 항생제의 방출 특성을 분석하였다. 상온에서는 항생제를 3 ug 이내로 방출하였 지만, 35 oC에서는 2시간이내에 대부분의 항생제를 방출하였고 10 ug까지 방출하였다. 결론 : 본 연구에서는 온도감응형 나노구조체를 합성하고, 이를 콘택트렌즈에 적용 및 항생제를 탑재하여, 온 도감응형 스마트 항생제용출 콘택트렌즈를 제조하였다. 온도감응형 나노구조체는 콘택트렌즈안에서 항생제를 성 공적으로 탑재할 수 있었고, 상온에서 상당량의 항생체를 보관하고, 온도증가시 10 ug까지의 많은 양의 항생제를 방출하였다. 본 연구결과는 약물전달용 스마트 안과의료기기 및 콘택트렌즈의 개발 및 상용화에 큰 역할을 할 것 으로 기대된다.

The function of coolant in machining is to reduce the frictional force in the contact area in between the tool and the material, and to increase the precision by cooling the work-piece and the tool, to make the machining surface uniform, and to extend the tool life. However, cutting oil is harmful to the human body because it uses chlorine-based extreme pressure additives to cause environmental pollutants. In this study, the effect of cutting temperature and surface roughness of titanium alloy for medical purpose (Ti-6Al-7Nb) in eco-friendly ADL slot shape machining was investigated using the response surface analysis method. As the design of the experiment, three levels of cutting speed, feed rate, and depth of cut were designed and the experiment was conducted using the central composite planning method. The regression expressions of cutting temperature and surface roughness were respectively obtained as quadratic functions to obtain the minimum value and optimal cutting conditions. The values from this formula and the experimental values were compared. As a result, this study makes and establishes the basis to prevent environmental pollution caused by the use of coolant and to replace it with ADL (Aerosol Dry Lubricant) machining that uses a very small amount of vegetable oil with high pressure.

PURPOSES : Owing to industrial development, the occurrence of continuous environmental damage such as abnormal weather is accelerating because of a rapid increase in carbon emissions. Therefore, various efforts are expended worldwide to realize a low-carbon ecofriendly society. In the construction industry, various efforts have been realized to reduce environmental pollution such as greenhouse gas emissions, for example by introducing eco-friendly materials and reducing industrial waste. In this study, an asphalt pavement technology that can reduce production and construction temperatures by more than 60 °C is developed to reduce the amount of carbon generated in the asphalt industry. METHODS : The performance of a half-warm asphalt binder developed using thermoplastic elastomers and low-temperature additives was assessed. In addition, the change in the quality of a mixture due to the use of the half-warm asphalt binder was evaluated. RESULTS : As the amount of thermoplastic elastomer used increases, the performance grade of the asphalt binder increases as well. When 3% or more of the elastomer is incorporated, the target performance grade of the asphalt binder is satisfied. In addition, by incorporating the thermoplastic elastomer and a low-temperature additive, the overall moisture and rutting resistance increased even at relatively low production and compaction temperatures. CONCLUSIONS : Additional measures to stabilize quality and improve economic feasibility will present a new paradigm for investigations into eco-friendly asphalt concrete pavements.

PURPOSES : In this study, an eco-friendly mastic asphalt backfill material is developed to reduce production and construction temperatures by 40 ℃ compared with those recorded when using conventional hot-mix mastic asphalt backfill materials. METHODS : To reduce the production and construction temperatures, SIS polymer modifiers and gum rosin were selected, and gum rosin-modified SIS materials were applied to the mastic asphalt binder mix design. SIS is less viscous than SBS at high temperatures owing to its thermal characteristics, and incorporating gum rosin into SIS causes the latter to exhibit a loose and soft structure. To improve the performance of the mastic asphalt modified with SIS and gum rosin, three different filler mixes, i.e., 100% PMMA, 50% PMMA and 50% calcium carbonate, and 40% PMMA and 60% calcium carbonate were applied. RESULTS : The rosin-modified SIS reduces the viscosity of the developed mastic asphalt binders. In particular, incorporating 3.7% of gum rosin is beneficial to the mastic binder and does not degrade its low-temperature performance. Similarly, using 100% PMMA as a filler improves the performance but results in workability issues at high temperatures. CONCLUSIONS : Rosin-modified SIS and PMMA are promising alternatives for increasing the workability at high temperatures while maintaining the target performance of grade PG82-22 binders if the appropriate ratio of calcium carbonate is mixed with PMMA and an alternative filler comprising calcium carbonate is used.

콩줄기명나방은 콩과작물 특히 팥을 가해하는 해충으로 알려져 있다. 본 연구는 온도가 콩줄기명나방의 발육단계별 발육기간, 성충의 수명 과 산란특성에 미치는 영향을 파악하고자 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 36°C 항온조건에서 조사하였다. 알과 유충은 7, 10, 13°C를 제 외한 항온조건에서 다음 생애단계로 성공적으로 발육하였다. 알, 유충, 번데기의 발육기간은 온도가 상승할수록 짧아지는 경향을 보였다. 콩줄기 명나방 발육단계별 발육 최저, 최고 한계는 LRF와 SSI모델을 이용하여 계산하였고 발육영점온도와 유효적산온일도는 선형회귀분석을 이용하 였다. 1령 유충 부화부터 성충출현까지의 발육영점온도와 유효적산온일도는 13.5°C와 384.5DD로 추정되었다. SSI모델을 이용한 부화부터 성 충출현까지 발육 최저 및 최고온도는 19.4°C과 39.8°C였고 이들간의 차이 즉 발육적정온도범위는 20.4°C였다. 성충은 16°C와 34°C 범위에서 부화하는 알을 생산하였고, 25°C에서 최대 약 416마리의 자손을 낳았다. 노화율, 나이별 생존율, 나이별 누적산란율, 온도의존 산란수에 관련된 성충모델들이 작성되었다. 본 연구에서 제시한 온도발육모형과 산란모형은 야외에서 콩줄기명나방의 개체군동태를 이해하고 콩과작물의 종합적 인 해충군관리체계를 마련하는데 기초기반자료로 활용될 것으로 기대된다.

콩명나방은 콩과작물 특히 팥을 가해하는 해충으로 알려져 있다. 본 연구는 콩명나방의 생물적 특징을 알아보기 위해 발육단계별 발육기 간, 성충의 수명과 번식능력을 13, 16, 19, 22, 25, 28, 31, 34°C 항온조건에서 조사하였다. 알은 모든 항온조건에서 부화하였고 유충은 16~ 31°C 온도조건에서 성공적으로 성충까지 발육을 완료하였다. 알의 발육기간은 31°C까지 온도가 상승할수록 짧아지다가 이후 온도에서 길어지 는 경향을 보였다. 유충, 번데기의 발육기간과 성충수명은 온도가 상승할수록 감소하였다. 콩명나방 발육단계별 발육 최저, 최고 한계는 LRF와 SSI모델을 이용하여 계산하였고 발육영점온도와 유효적산온일도는 선형회귀분석을 이용하였다. 1령 유충 부화부터 성충출현까지의 발육영점온 도와 유효적산온일도는 12.8°C와 280.8DD였다. SSI모델을 이용하여 추정한 부화부터 성충출현까지 발육최저 및 최고온도는 14.2°C과 31.9°C였고 이들간의 차이 즉 발육적정온도범위는 17.7°C였다. 온도와 관련된 콩명나방 성충의 생존, 수명, 산란기간, 산란수 자료들을 이용하 여 산란모형을 작성하였다. 본 연구에서 제시한 온도발육모형과 산란모형은 야외에서 콩명나방의 개체군동태를 이해하고 콩과작물의 종합적인 해충군관리체계 확립에 기여할 것으로 보인다.

For the selective catalytic reduction of NOx with ammonia (NH3-SCR), a V2O5WO3/TiO2 (VW/nTi) catalyst was prepared using V2O5 and WO3 on a nanodispersed TiO2 (nTi) support by simple impregnation process. The nTi support was dispersed for 0~3 hrs under controlled bead-milling in ethanol. The average particle size (D50) of nTi was reduced from 582 nm to 93 nm depending on the milling time. The NOx activity of these catalysts with maximum temperature shift was influenced by the dispersion of the TiO2. For the V0.5W2/nTi-0h catalyst, prepared with 582 nm nTi-0h before milling, the decomposition temperature with over 94 % NOx conversion had a narrow temperature window, within the range of 365-391 °C. Similarly, the V0.5W2/nTi-2h catalyst, prepared with 107 nm nTi-2h bead-milled for 2hrs, showed a broad temperature window in the range of 358~450 °C. However, the V0.5W2/Ti catalyst (D50 = 2.4 μm, aqueous, without milling) was observed at 325-385 °C. Our results could pave the way for the production of effective NOx decomposition catalysts with a higher temperature range. This approach is also better at facilitating the dispersion on the support material. NH3-TPD, H2-TPR, FT-IR, and XPS were used to investigate the role of nTi in the DeNOx catalyst.

In this study, the load fluctuation of the main engine is considered to be a disturbance for the jacket coolant temperature control system of the low-speed two-stroke main diesel engine on the ships. A nonlinear PID temperature control system with satisfactory disturbance rejection performance was designed by rapidly transmitting the load change value to the controller for following the reference set value. The feed-forwarded load fluctuation is considered the set points of the dual loop control system to be changed. Real-coded genetic algorithms were used as an optimization tool to tune the gains for the nonlinear PID controller. ITAE was used as an evaluation function for optimization. For the evaluation function, the engine jacket coolant outlet temperature was considered. As a result of simulating the proposed cascade nonlinear PID control system, it was confirmed that the disturbance caused by the load fluctuation was eliminated with satisfactory performance and that the changed set value was followed.

This study aimed to evaluate the germination characteristics, -glucan and antioxidant contents, and antioxidant activity of naked oat according to germination temperature (20, 25, and 30oC) and time (24, 48, and 72 h). Sprout length was highest at 25oC, and the rotten degree was increased as the germination temperature and time increased. The -glucan content of naked oat increased after 24 h of germination at all temperatures and then decreased by 72 h of germination. Total polyphenol content, flavonoid content, and antioxidant activity increased as the germination temperature and time increased.

The Alkali-Metal Thermal to Electric Converter (AMTEC) can be used as a next-generation power generation technology related with a large thermal energy storage. In particular, this technology is expected for the higher efficiency by a cascade power generation with the thermoelectric generator(TEG), and the temperature distribution becomes a very important design parameter in this case. In this study, the temperature distribution of the AMTEC unit was analyzed through CFD analysis, and design points were discussed based on the results.