This study aimed to develop an optimal processing method for the production of apple-mango jelly for domestic suppliers, by analyzing the quality attributes of the jelly. According to the central composite design, a total of 11 experimental points were designed including the content of apple-mango juice (X1), and the sugar content (X2). The responses were analyzed including the color values (CIE Lab and color difference), physicochemical properties (water activity, sweetness, pH, and total acidity), and textural properties (hardness and gel strength). Regression analysis was conducted, except for total acidity, and showed no significant difference for all the experimental points (p<0.05). Quadratic model was derived for all responses with an R square value ranging from 0.8590 to 0.9978. Based on regression model, the appropriate mixing ratio of apple-mango jelly was found to be 31.11% of apple mango juice and 14.65% of sugar. Through this study, the possibility for developing jelly product using apple-mango was confirmed, and it is expected that these findings will contribute to the improvement of the agricultural industry.

Molds are actively used for mass production of products such as mobile phones. Molds are required to be durable and have a high level of surface roughness. Therefore, the optimization of mold processing is essential. In this study, the cutting processing of SDP20 steel used in molds was analyzed and optimized. This study is expected to contribute to the improvement of product productivity to which plastics are applied.

The most important factor in the processing of composite materials is the creation of burrs. In order to minimize the generation of burrs, the preceding researchers changed the shape and processing conditions of the tool. The developed composite material using carbon and aramid fibers has limitations in reducing the formation of burrs. In this study, in order to solve this problem, by applying a jig under the test piece during drilling, it was possible to perform high-quality hole processing with minimal burr generation.

생강의 기능성 소재화를 위해 흑생강을 제조함에 있어 숙성 조건 최적화를 위한 숙성 온도(75.0~90.0℃, X1)와 시간(18.0~72.0 hr, X2)을 독립변수로 하고 중심합성계획에 따른 11구간의 조건에서 제조된 흑생강의 이화학적 특성 및 항산화 활성을 측정하였다. 흑생강의 수율은 모든 조건에서 60% 이상이었다. 흑생강의 명도와 황색도, 6-shogaol, 총 페놀 및 플라보노이드 함량은 숙성 온도가 높고 시간이 길어질수록 증가되는 경향이었다. 특히 흑생강의 6-shogaol, 총 페놀 함량 및 항산화 활성은 90℃에서 45 hr 숙성 시 최대값을 보였다. 반응표면분석법에 의한 흑생강의 제조 시 예측된 최적 조건은 89.97℃ 및 21.60 시간이었으며, 실측값은 예측값의 92.7~101.6%의 범위였다.

The purpose of this study was to establish the optimum experimental conditions by investigating the relationship between the nine experimental conditions using Taguchi technique. Through experiments, we found that the weight, thickness, and length of the sample were most affected by the angle at which the sample was installed, while the width had the largest influence on the sample's x-axis and the inner diameter. It was confirmed. Therefore, through this experiment, it was confirmed that the installation angle of the product had the greatest influence on the error occurrence of the product during 3D printer processing.

This study investigated the effects of blanching time (1-5 min), types of blanching solution (1% NaCl vs 1-3% sucrose), addition of packaging with blanching solution, and thawing methods (thawing in packaged versus depackaged units) on the qualities of frozen Aster scaber. As quality parameters, drip loss, moisture content, shear force, color, and sensory test were conducted. Aster scaber was blanched in 1% sucrose for 4 min and packaged with the same solution prior to freezing whereas frozen Aster scaber exhibited palatable quality when it was removed from the package and thawed in running water. Consequently, this study demonstrated that the optimized processing condition provided qualities like non-frozen control.

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles 1.5μm in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

The purpose of this study was to determine the optimal mixing conditions of soybean oil and bread crumbs mixture for pork patty. The experiment was designed according to the central composite design of response surface methodology. There were ten experimental points, including two replicates for soybean oil and bread crumbs. The physicochemical and mechanical analyses of each sample, including pH, cooking loss, thickness increase, moisture content, lightness, hardness, adhesiveness, springiness, chewiness, and gumminess showed significant differences (p<0.05). The results of sensory evaluation showed significant differences in tenderness, juiciness, and overall quality (p<0.05). The optimum formulation calculated by numerical and graphical method was 13.61 g of soybean oil and 6.35 g of bread crumbs. The results obtained in this study will be useful to the meat industry, which tends to decrease the saturated fatty acid content with a concomitant enrichment in the unsaturated fatty acids content.

고구마 칩의 최적 제조 조건 확립과 적합품종을 선정하기 위하여 신자미, 주황미 및 하얀미를 시료로 세절 두께(1~3㎜), 침지 당액 농도(15~30%), 데치기 시간(15~60 sec), 굽기온도(110~140℃) 및 굽기 시간(23~31 min)을 달리하여 칩을 제조하고, 각 조건별 관능평가와 파괴강도를 측정하였다. 품종 별 최적 제조 조건은 신자미는 각각 1 ㎜, 20%, 45 sec, 120℃ 및 31 min이었으며, 주황미는 1 ㎜, 25%, 45 sec, 130℃ 및 29min이었고, 하얀미는 1 ㎜, 25%, 30 sec, 130℃ 및 27 min이었다. 칩 제조 후 유리당 함량은 증가하였으며, maltose는 원료에서 검출되지 않았으나, 칩에서 3.85~13.50% 범위에서 증가하였고, sucrose 함량은 10.31~20.67% 범위에서 25.24~34.06% 범위로 칩 제조 시 증가하였다. 칩의 관능특성에 영향을 미치는 요인은 fructose, maltose, sucrose 함량, b-value 및 failurestress로 나타났다. 이러한 결과는 칩의 제조 시 적합한 품종의 선택과 품종에 따른 최적 제조 조건의 설정이 필요할 것으로 판단되며, 주황미가 칩의 제조에 가장 적합한 것으로 판단되었다.

The purpose of this study was to determine the optimal amounts and mixing condition of skim milk powder (A), and roselle (B) for the production of yogurt prepared with roselle. The experiment was designed according to the central composite design for estimating the response surface method, which yielded ten experimental points, including two replicates for the skim milk powder and roselle. The physicochemical and mechanical analysis of each sample, including pH (P<0.001), titratable acidity (P<0.001), color (P<0.05), viscosity (P<0.001), showed significant differences. Antioxidant properties (total phenolic content, DPPH free radical scavenging activity) and viable cell counts of lactic acid were significantly different (P<0.05). The sensory measurements were significantly different in color, flavor, sourness, texture, and overall quality (P<0.05). The optimal formulation, calculated by numerical and graphical methods, was 7.82 g of skim milk powder and 2.09 g of roselle. From findings of this study, the roselle may be used in yogurt and can be applied for other food industries.

Nano-sized cobalt powder was fabricated by wet chemical reduction method at room temperature. The effects of various experimental variables on the overall properties of fabricated nano-sized cobalt powders have been investigated in detail, and amount of NaOH and reducing agent and dropping speed of reducing agent have been prop- erly selected as experimental variables in the present research. Minitab program which could find optimized conditions was adopted as a statistic analysis. 3D Scatter-Plot and DOE (Design of Experiments) conditions for synthesis of nano- sized cobalt powder were well developed using Box-Behnken DOE method. Based on the results of the DOE process, reproducibility test were performed for nano-sized cobalt powder. Spherical nano-sized cobalt powders with an average size of 70-100 nm were successfully developed and crystalline peaks for the HCP and FCC structure were observed without second phase such as Co(OH).

The purpose of this study was to bake sweet rice muffins with oak mushroom (Lentinus edodes) powder. The process included substituting sweet rice flour for cake flour and adding oak mushroom powder. This study determined the optimal mixing conditions of oak mushroom muffins by adjusting the amounts of oak mushroom powder, whole eggs, and soybean oil. The mixing conditions for the oak mushroom muffins included 3 categories: oak mushroom powder (X1), whole eggs (X2), and soybean oil (X3) by Central Composite Design (CCD) which was optimized by Response Surface Methodology (RSM). Oak mushroom muffin formulation was optimized using rheology. Yellowness (p〈0.001) and redness (p〈0.05) displayed a linear model pattern, whereas lightness (p〈0.05) was represented by a quadratic model. Among the sensory properties, variables that appeared to show significant values such as appearance (p〈0.5), texture (p〈0.5), and overall quality (p〈0.5) were used to identify optimums. The result of mechanical properties showed significant values in gumminess (p〈0.5) and chewiness (p〈0.5). The numerical and graphical methods used in this study determined that the optimum formulation for oak mushroom powder sweet rice muffins was 8.75 g of oak mushroom powder, 235.95 g of whole eggs, and 19.93 g of soybean oil.

The purpose of this study was to determine the optimal mixing conditions for three different amounts of mulberry juice, sugar, and agar powder for Yanggaeng prepared with mulberry juice. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 16 experimental points including 2 replicates for mulberry juice, sugar and agar powder each?? The mechanical and sensory properties of test materials were measured, and these values were applied to the mathematical models. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. Measurement results of the mechanical properties showed a significant increase or decrease?? in pH, sugar content, water content, viscosity, l-value, a-value, b-value, hardness, springiness, chewiness, gumminess, cohesiveness. Also the sensory measurements showed a significant improvement?? in appearance, flavor, color, sweetness, texture, overall quality. As a result, the optimum formulation by numerical and graphical methods was calculated as mulberry juice 41.99 g, sugar 90.00 g, agar powder 3.18 g.

생강이 가지고 있는 항산화력을 최대화 시키기 위해 다양한 제조 공정에서 흑생강을 제조하였다. 증숙 온도 및 시간에 따른 DPPH radical 소거능을 측정하였고, 이를 반응표면 분석법에 의해 최적화된 제조 공정을 선정하였다. DPPH radical 소거능을 최대화 할 수 있는 최적 점을 설정한 결과 93.2oC에서 6시간의 증숙 공정이 설정되었다. 제조한 흑생강을 음료로 개발하기 위해, 매실 농축액과 꿀을 혼합하여 기능성과 선호도가 높은 음료를 제조하였다. DPPH radical 소거능, 플라보노이드 함량, 관능평가의 canonical 계수를 이용하여 수적 최적화를 통하여 최적 배합비를 구한 결과, 흑생강 추출물 14.2%, 매실농축액 5%, 꿀 10.8%로 나타났고 desirability가 0.615로 설정되었다. 이때의 종속 변수값들은 DPPH radical 소거능 46.0 mg/L, 플라보노이드 함량 29.9 mg/L, 선호도 5.284로 예측되었다.