본 실험에서는 Ti를 기반으로 한 평판 수소 분리막을 설계하여 제조하였다. 새로운 조성의 Ti를 베이스로 한 수소 분 리막을 찾기 위하여 여러 합금들의 물리화학적 특성과 수소투과도 사이의 상관관계에 대해 조사하였다. 이를 바탕으로 신조성의 합금막 2종(Ti14.2Zr66.4Ni12.6Cu6.8 (70 μm), Ti17.3Zr62.7Ni20 (80 μm))을 설계 및 제조하였다. 제조된 평판 수소 분리막은 300~500°C, 1~4 bar의 조건에서 혼합 가스(H2, N2), sweep 가스(Ar)를 이용하여 수소 투과 실험을 진행하였다. Ti14.2Zr66.4Ni12.6Cu6.8 합금 막은 500°C, 4bar에서 최대 16.35 mL/cm2min의 flux를 가지며, Ti17.3Zr62.7Ni20 합금막은 450°C, 4 bar에서 최대 10.28 mL/ cm2min의 flux를 가진다.

The present study was carried out to investigate the concentration and species diversity of airborne fungi in thermophilic mushroom cultivation houses. Fungal concentration measurements were performed in April and May 2022 for a Pleurotus ostreatus cultivation house, in July and August 2023 for a Pleurotus sajor-caju and Agaricus blazei cultivation house, and in June, July and August 2023 for a Pleurotus pulmonarius, Pleurotus sajor-caju and Calocybe indica cultivation house. The airborne fungal concentration was 2.95 × 102 CFU/m3~105CFU/m3, above 105CFU/m3, and 1.12 × 103 CFU/m3~ 9.17 × 103 CFU/m3 in the three cultivation houses, respectively. A total of 8 genera and 22 species of airborne fungi were isolated from three mushroom cultivation houses. 5 genera and 7 species were identified from P. ostreatus cultivation house. Furthermore, 4 genera 6 species were found from A. blazei and C. indica cultivation house. In addition, 5 genera and15 species were isolated from P. pulmonarius, P. sajor-caju and C. indica cultivation house. Among the fungi isolated, the class of Eurotiomycetes was the most common. Among the 22 fungal species, Aspergillus flavus, A. ochraceus A. sydowii, A. tubingensis, A. westerdijkiae, Penicillium brevicompactum, P. citrinum, and P. steckii have been reported as harmful species to mushrooms, food, and human.

The purpose of this study is to experimentally analyze the seismic performance of beam-column specimens with vertical irregular, which were reinforced with RHS (Replaceable steel haunch system). a steel haunch system. To evaluate the seismic performance of the RHS, three specimens were manufactured and subjected to cycle loading tests. Retrofitted specimens have different beam-upper column stiffness ratio as a variable. The stiffness ratio of beam-upper column were considered to be 1.2 and 0.84. As a result of the test, the specimen reinforced with RHS showed improved maximum load and effective stiffness, and energy dissipation capacity compared to the non-retrofitted specimen with same beam-upper column stiffness ratio. The specimen with 0.84 beam-upper column stiffness ratio showed improved performance than the specimen with 12.

In order to prevent accidents via defective ammunition, this paper analyzes recent research on ammunition life prediction methodology. This workanalyzes current shelf-life prediction approaches by comparing the pros and cons of physical modeling, accelerated testing, and statistical analysis-based prediction techniques. Physical modeling-based prediction demonstrates its usefulness in understanding the physical properties and interactions of ammunition. Accelerated testing-based prediction is useful in quickly verifying the reliability and safety of ammunition. Additionally, statistical analysis-based prediction is emphasized for its ability to make decisions based on data. This paper aims to contribute to the early detection of defective ammunition by analyzing ammunition life prediction methodology hereby reducing defective ammunition accidents. In order to prepare not only Korean domestic war situation but also the international affairs from Eastern Europe and Mid East countries, it is very important to enhance the stability of organizations using ammunition and reduce costs of potential accidents.

The purpose of this study is to improve the stack effect of the staircase and the failure to take into account the opening of the outside door of the staircase, which are the disadvantages of the existing smoke control only vestibule. As a result of the study, the new vestibule and the staircase simultaneous smoke control are equipped with an exhaust flap damper with an effective opening area of about 0.25 m² in the upper part of the staircase, and a ventilator-type air supply fan of about 5 m³/s in the lower part, and take measures to prevent overpressure in the staircase. If you use the new simultaneous smoke control method of the vestibule and staircase, you can achieve the following effects. First, it is possible to open the external entrance door. Second, it can reduce the stack effect. Third, the staircase door closes automatically without fail. And a new method of preventing overpressure was proposed for the vestibule.

Airborne bacteria in mushroom growing environments are a potential risk of contamination in commercial mushroom production. Controlling contamination in mushroom farms requires understanding the bacterial ecology in the cultivation environment. This study was conducted to investigate the concentration and species diversity of floating bacteria in a thermophilic mushroom cultivation room. Temperature, humidity, temperature, humidity, and bacterial concentration measurements were performed in April and May 2022 for a Pleurotus ostreatus cultivation house, in July and August 2023 for a Pleurotus sajor-caju and a Agaricus blazei cultivation house, and in June, July and August 2023 for a Pleurotus pulmonarius, Pleurotus sajor-caju and Calocybe indica cultivation house. The airborne bacterial concentration was 5.27 × 103~105 CFU/m3, 3.81 × 102 ~1.37 × 103 CFU/m3, and 2.55 × 102 ~1.37 × 102 CFU/m3 in the three cultivation houses, respectively. A total of 23 genera and 37 species of airborne bacteria were isolated from the three mushroom cultivation houses. 12 genera and 18 species were identified from P. ostreatus cultivation house. Furthermore, 4 genera and 4 species were found from A. blazei and C. indica cultivation house. In addition, 11 genera and 18 species were isolated from P. pulmonarius, P. sajor-caju and C. indica cultivation house. Among the bacteria isolated, the Bacilli class was the most common, followed by Gammaproteobacteria. Among the 37 bacterial species, it was determined that Bacillus cereus, B. licheniformis, Cedecea neteri, Exiguobacterium acetylicum and Raoultella terrigena could negatively affect humans or foodstuff. Cedecea neteri is also known to cause diseases among mushrooms.

속도와 안전은 밀접한 관련이 있으며, 현재 국내에서는 속도 관리를 위해 제한속도를 설정하고 제한속도 기준에 맞춰 차량의 주행 속도를 단속하는 방식에 초점을 두고 있다. 하지만 도시부 보행자 안전 확보를 위해 차량이 제한속도 기준 외에 도로 구간에 따라 안 전하고 적절한 속도로 주행하도록 하는 안전속도의 모니터링이 필요한 상황이다. 본 연구에서는 이러한 안전속도의 범위 제시를 위해 사고 빈도 모형을 개발하고, 사고 빈도 모형에서 사고 빈도가 급격하게 변화하는 변곡점을 찾아 안전수준을 판단할 수 있는 임곗값으 로 설정하였으며, 설정된 임곗값을 기준으로 제한속도가 다른 두 도로 집단의 안전속도 범위를 제시하였다. 이 과정에서 대전시의 개 별차량 주행궤적 데이터를 수집 및 가공하여 모형의 입력변수로 활용하기 위한 속도 관련 안전성 평가지표를 산정하였으며, Dynamic threshold method 기반의 새로운 평가지표를 제안하였다. 또한, 속도 관련 안전성 평가지표뿐만 아니라 대전시 T-GIS에서 수집한 도로 시설물 데이터를 모형의 독립변수로 활용하여 도로 시설물을 고려한 안전속도 범위를 산정하고자 하였다. 안전속도 범위 도출 결과, 교차로와 횡단보도의 존재는 누적 사고 수와 양의 상관관계를 가졌으며, 사고 빈도 예측에서도 평균 주행 속도가 30km/h 이하로 낮은 경우 사고 빈도가 높게 추정되어 교차로 등 차량이 정지하는 상황과 첨두시와 같이 혼잡한 교통류 상황에서 차량이 안전하고 적절한 속도로 주행할 수 있도록 하는 안전관리 전략 수립이 필요함을 도출하였다. 본 연구에서 개발한 안전속도 범위 결정 방법론과 안전속 도 범위를 참고하여 도시부 속도 관리를 위한 교통안전 관리전략을 수립할 수 있을 것으로 기대한다.

본 연구는 아로마 목걸이를 병용한 비대면 수면 프로그램이 불면증 대학생의 수면의 질, 주간졸 림증, 우울 및 스트레스에 미치는 효과를 확인하고자 비동등 대조군 전후 실험설계로 시도되었다. 대상자 는 경기도 S시 소재 E대학에 재학중인 대학생 가운데 불면증상을 호소하는 대상자에게 중재 전후에 자가 설문으로 구성된 수면의 질, 주간졸림증, 우울, 스트레스를 측정하였다. 아로마목걸이를 병용한 비대면 수 면 프로그램은 실험군(n=21)에게 주 1회, 총 6주 동안 적용하였으며 대조군(n=21)에게 수면책자를 제공하 였다. 자료분석은 SPSS 24.0 프로그램을 이용하여 기술통계, Chi-square test, Fisher’s exact test, Independent t-test를 이용하여 분석하였다. 연구결과, 수면의 질(t=-5.87, p<.001), 주간졸음(t=-4.28, p<.001), 우울(t=-4.40, p<.001)에서는 그룹 간 유의한 차이가 나타났으며 스트레스는 유의하지 않았다. 따라서 아로마목걸이를 병용한 비대면 수면 프로그램이 대학생의 수면의 질, 주간졸림증, 우울 증상을 감 소시키는데 유용한 간호중재법으로 활용 가능할 것을 기대된다.

This paper proposes the armored combat bulldozer, essential for amphibious tasks, requires water ingress prevention and submersion capabilities, typically addressed by a centrifugal pump. This study aims to boost the bulldozer's drainage pump efficiency by replacing the traditional aluminum 3-blade impeller with one made of ASA material using 3D printing. Analysis via ANSYS Fluent revealed that the 5-blade impeller increased discharge volume by 19.31% and efficiency by 6.07%, while the 6-blade variant saw a 27.07% increase in discharge volume and 8.81% efficiency improvement. Further scrutiny with ANSYS Static Structure ensured the new impellers' structural integrity and robustness under extreme conditions. This research confirms the potential of 3D printing in enhancing military equipment, demonstrating significant improvements in pump performance and opening paths for advanced manufacturing techniques to meet the demanding needs of combat vehicles.

본 연구는 유색과 백색품종 토종오리의 성별에 따른 생산능력과 도체특성을 평가하고자 실시하였다. 1일령 토종오리 총 480수를 2개 품종(유색과 백색)×2개 성별(암컷과 수컷)로 총 4처리구의 4반복으로 반복 당 30수씩 평사에 나누어 8주간 사양실험을 진행하였다. 본 연구결과, 전체 사양실험기 간에서 토종오리의 체중, 증체량 및 사료섭취량은 품종(유색과 백색) 간 차이는 없었으나 수컷이 암컷보다 유의적으로 높았다(p<0.05). 이와 유사하게, 사료요구율은 유색품종과 백색품종의 차이가 없었으나 수컷이 암컷에 비해 유의적으로 개선됨을 확인하였다(p<0.05). 토종오리의 머리, 가슴육, 다리육 및 간의 무게는 처리구간 통계적 차이를 나타내지 않았다. 도체중량은 처리구간 차이가 없었으나, 도체율은 백색품종이 유색품종과 비교해 현저히 높았다(p<0.05). 또한 복강지방 무게는 수컷이 암컷에 비해 높았으며(p<0.05) 백색품종이 유색품종보다 높았다(p<0.05). 폐사율은 토종오리 의 품종과 성별에 따른 유의적 차이가 없었다. 본 연구결과는 토종오리의 육성기 단계에서 사육성적에 대한 기초자료로 이용될 것으로 사료된다.

PURPOSES : Sprinkler facilities play a crucial role in extinguishing fires in the early stages of a building blaze. Data indicate that more than 96% of fires are suppressed by sprinklers before growing out of control. However, corrosion and pitting of the sprinkler piping can reduce system performance as facilities age. The purpose of this study is to develop an eco-friendly water-soluble corrosion inhibitor to improve the reliability and longevity of sprinkler piping. METHODS : This study compared and analyzed silicate-based sprinkler piping shrinkage agents as corrosion inhibitor against existing commercial options. Tests were conducted to evaluate reactivity with fire extinguishing water, including electrolyzed reduced water and normal water. The anticorrosive performance of the silicate-based corrosion inhibitor was evaluated under various conditions to establish suitability before potential development or commercialization. RESULTS : The new corrosion inhibitor demonstrated eco-friendly performance. In testing, none of the primary four hazardous substances that pose the most risk of harm to the human body (specifically, arsenic (As), lead (Pb), cadmium (Cd), and mercury (Hg)) were detected. The inhibitor effectively reduced corrosion of carbon steel (SPP), with weight loss rates averaging 0.12% and not exceeding 0.27%. For copper (CDA 110) weight loss rates were up to 0.03%. Testing under constant temperature and humidity conditions show that the inhibitor kept weight loss was below 0.002 g, with no significant numerical value for the weight loss rate. Overall, the results indicate the potential for an environmentally-safe corrosion inhibitor. CONCLUSIONS : The optimal silicate-based sprinkler system can provide real-time sensor information such as oxygen saturation, pH concentration, and total dissolved solids (TDS). These metrics are closely related to the aging process. By linking this system with an aging monitoring solution, maintenance costs and safety could be improved over the lifespan of the sprinkler system. The sensors and monitoring capabilities are expected to enhance maintenance efficiency and equipment reliability.

This study aimed to investigate the relationship between the nutrition quotient and the dietary intake of adolescents. A total of 393 adolescents were surveyed to evaluate their Nutrition Quotient for Korean Adolescents (NQ-A) scores and dietary intake. The average age of the survey subjects was 15 years and the average NQ-A score of the subjects was 49.11±13.35. There was no significant difference in the NQ-A scores according to gender and age. The average dietary diversity score was 3.77±0.85, and it was significantly higher in boys than in girls (p< .05) with the scores of 12-14-year-old students being significantly higher than those aged 15-18 years (p< .01). The results of comparing the percentage of recommended intake or adequate intake and the mean adequacy ratio (MAR) according to the NQ-A grade, showed that the ‘High’ grade had a significantly higher intake percentage of vitamin B1, B12, folate, phosphorus, iron and a significantly higher MAR (p< .05). From a long-term perspective, efforts to improve dietary habits are deemed necessary to meet an individual’s nutritional requirements. Adolescents themselves should develop proper eating behaviors and acquire suitable dietary management skills to enhance their nutritional status, ultimately contributing to an improvement in their quality of life.

본 실험에서는 α-Al2O3 지지체에 무전해도금을 이용하여 Pd-Ag-Cu 분리막을 제조하였다. Pd, Ag, Cu는 각각 무 전해도금을 통해 지지체 표면에 코팅하였고, 합금의 형성을 위해 무전해도금 중간에 H2, 500°C의 조건에서 18 h 동안 열처리 를 진행하였다. 이를 통해 제조된 Pd-Ag-Cu 분리막은 SEM을 통해 표면을 관찰하였으며, Pd 분리막의 두께는 7.82 μm, Pd-Ag-Cu 분리막의 두께는 3.54 μm로 측정되었다. EDS와 XRD 분석을 통해 Pd-Ag-Cu 합금이 Pd-78%, Ag-8.81%, Cu-13.19%의 조성으로 형성된 것을 확인하였다. 기체투과 실험은 H2 단일가스와 H2/N2 혼합가스에서 실험을 진행하였다. H2 단일가스에서 측정한 수소 분리막의 최대 H2 flux는 Pd 분리막의 경우 450°C, 4 bar에서 74.16 ml/cm2·min이고, Pd-Ag-Cu 분리막의 경우 450°C, 4 bar에서 113.64 ml/cm2·min인 것을 확인하였고, H2/N2 혼합가스에서 측정한 separation factor의 경우 450°C, 4 bar에서 각각 2437, 11032의 separation factor가 측정되었다.

본 연구에서는 보육시설 내 식수인원 및 조리 종사자 근무현황에 따른 급식소 위생 관리수준을 평가하였다. 2021 년부터 2022년까지 풀무원푸드머스를 통해 식자재를 공급 받는 전국 199개 보육시설을 대상으로 61개 점검문항 중 평가결과에서 유의미한 일부 분석결과를 바탕으로 작성하 였다. 분석결과 식수인원이 적고, 조리 종사자가 적을수록 검수기록이 미 실시(P<0.05)되는 평가되었으며, 식수인원 이 적을수록 조리 종사자의 건강상태 확인이 미흡하고, 조 리 종사자가 적을수록 복장착용(P<0.05)이 미흡하였다. 또 한, 식수인원이 적은 보육시설일수록 소비기한 경과 식재 료 보관이 확인(P<0.05)되는 빈도 수가 높아 관리가 요구 되었으며, 가열조리 시 심부온도 측정기록은 미 실시(P<0.05) 되는 것으로 확인되었다. 그리고 식수인원이 적은 보육시 설일수록 조리시설의 유지관리가 미흡(P<0.05)하였다. ATP 측정결과에서는 식수인원이 적은 조리시설 종사자의 손과 도마에서 유의적으로 높은 ATP 수치가 검출(P<0.05)되었으 며, 조리종사자가 적을수록 근무 급식소의 도마에서 높은 ATP 수치(P<0.05)가 측정되었다. 분석결과를 종합해 볼 때 식수인원이 적은 보육시설일수록 조리운영을 위한 시설기반 관리가 부족하고, 위생관리가 미흡한 것으로 확인되었다. 따 라서 본 연구결과를 통해 식수인원 및 조리 종사자 수에 따 른 보육시설 급식소의 위생 관리수준을 판단하였으며, 향후 보육시설에 대한 국가 지원사업 선정 시 해당 연구결과가 기초자료로써 활용될 수 있을 것으로 사료된다.

A checklist of dietary behavior items for the elderly was developed based on Korean dietary guidelines. First, a literature review was conducted, and 63 preliminary items, including 30 items on food intake, 12 on eating habits, and 21 on dietary culture, were obtained to evaluate the dietary guidelines. The preliminary items were evaluated by experts using Lawshe’s method to verify the content validity. They were then revised, resulting in 52 items: 25, 11, and 16 in the food intake, eating habits, and dietary culture domains, respectively. A face-to-face survey was conducted on 331 people over 65 years of age in the metropolitan area, and their one-day food intake was surveyed using a 24-hour recall method in August 2022. The 48 items, including 24, 11, and 13 items on food intake, eating habits, and dietary culture, respectively, correlated significantly with the evaluation indicators of nutrient intake, such as mean adequacy ratio, dietary diversity score, and nutrient intake density. These items were considered suitable for evaluating the elderly's compliance with dietary guidelines.

PURPOSES : In this study, an empirical approach was established to estimate the parameters of the resilient modulus based on various geotechnical properties of subgrade soils. METHODS : Multiple regression analyses were performed to analyze the relationship between resilient modulus (k1) and deformation. The most important factors are the #200 sieve passing ratio, moisture content, and dry unit weight of the soil. The applicability of this approach was verified using selected field data and the literature. RESULTS : The correlation between the results predicted using the prediction equation of the model constant (k1) and the actual k1-value was high. The applicability of the prediction equation was considered high owing to its high suitability with the existing data. The range of values obtained using the constant prediction equation of the proposed model was also judged to be reasonable. In the comparison of the CBR value of the subgrade material of the actual design section and the predicted elastic modulus (k1), almost no relationship was observed between the CBR and the model coefficient (k1). Thus, the estimation of the elastic modulus through CBR is likely to contain errors. CONCLUSIONS : Based on these results, the parameters of the universal model can be predicted using the stress-dependent modulus model proposed in this study.

This study investigated the effect of Lactiplantibacillus plantarum JSA22-fermented rice drinks on dextran sodium sulfate (DSS)-induced colitis in mice. Twenty-four mice were randomly assigned; No colitis (Con), colitis with tap water (DSS-only), colitis with unfermented rice (DSS-UFR), and colitis with fermented rice (DSS-FR). After inducing colitis with 2% DSS for 5 days, they were given Tap water, UFR drink, or FR drink for an additional 6 days. The DSS-FR group had significantly lower Disease Activity Index (DAI) scores compared to the DSS-only group, but no significant difference with the DSS-UFR group. Colon length was reduced in the DSS-only group. The DSS-only group had significantly higher IL-6 mRNA levels compared to the Con group, while the DSS-FR groups showed significantly lower IL-6 mRNA levels compared to the DSS-only group. These results suggest that rice drinks fermented with Lactiplantibacillus Plantarum JSA22 ameliorate the severity of DSS-colitis, by potentially reducing proinflammatory cytokines.

Recently, in newly constructed apartment buildings, the exterior wall structures have been characterized by thinness, having various openings, and a significantly low reinforcement ratio. In this study, a nonlinear finite element analysis was performed to investigate the crack damage characteristics of the exterior wall structure. The limited analysis models for a 10-story exterior wall were constructed based on the prototype apartment building, and nonlinear static analysis (push-over analysis) was performed. Based on the finite element (FE) analysis model, the parametric study was conducted to investigate the effects of various design parameters on the strength and crack width of the exterior walls. As the parameters, the vertical reinforcement ratio and horizontal reinforcement ratio of the wall, as well as the uniformly distributed longitudinal reinforcement ratio and shear reinforcement ratio of the connection beam, were addressed. The analysis results showed that the strength and deformation capacity of the prototype exterior walls were limited by the failure of the connection beam prior to the flexural yielding of the walls. Thus, the increase of wall reinforcement limitedly affected the failure modes, peak strengths, and crack damages. On the other hand, when the reinforcement ratio of the connection beams was increased, the peak strength was increased due to the increase in the load-carrying capacity of the connection beams. Further, the crack damage index decreased as the reinforcement ratio of the connection beam increased. In particular, it was more effective to increase the uniformly distributed longitudinal reinforcement ratio in the connection beams to decrease the crack damage of the coupling beams, regardless of the type of the prototype exterior walls.

In alignment with South Korea's “3020 Renewable Energy Expansion Plan,” this study focuses on the developing large-scale floating wind turbines. It addresses the challenges of increased size and cost in floating structures for wind turbines over 10MW. This paper details the preliminary design of a novel floating substructure utilizing composite materials(ie, EVA). Structural analysis was performed using ABAQUS, accounting for both typical and extreme wind conditions. Results from the analysis validate that the substructure design is adequately feasible for implementation.

해양사고 예방 지원을 목표로 해양수산부 주도의 지능형 해상교통정보서비스가 지난 21년 1월부터 시작되었고 그동안 이용이 제한되었던 3톤 미만 선박까지 확대하기 위해 개발·추진되는 소형 초고속해상무선통신망(이하 LTE-M) 송수신기의 성능 검증 방안에 대해 연구하였다. 국내 해양 사고의 약 30%가 3톤 미만의 선박에서 발생되고 있기 때문에 소형 선박 전용의 송수신기 개발을 통한 해양안전 사각지대 보완이 필요하다. 소형 LTE-M 송수신기는 연안에서 조업 활동이 활발한 어선과 육지 인근의 수상레저기구 등을 대상으로 적용 될 수 있다. 따라서 실제 송수신기가 설치·이용되는 환경을 고려하여 충분한 성능 및 안정적인 통신 품질 제공 여부를 검증하는 방안이 필요하다. 본 연구에서는 LTE-M 망의 통신품질 요구 기준과 해양수산부의 소형 송수신기 성능 요구 기준을 검토해보고, 소형 송수신기의 성능을 적합하게 평가할 수 있는 시험 방안을 제안하였다. 제안한 시험 방안은 해양 사고 빈도가 높은 6개 실해역 노선을 대상으로 타당 성을 검증하였으며, 소형 송수신기 다운링크 및 업링크 전송속도가 각각 9Mbps 이상 및 3Mbps 이상의 성능을 보임을 확인할 수 있었다. 또한 커버리지 분석시스템을 활용하여 집중관리구역(0~30km) 및 관심구역(30~50km)에서 각 95% 이상 및 100%의 커버리지를 확인하였다. 본 논문에서 제안한 성능 평가 방안 및 시험 결과는 송수신기의 성능 검증을 위한 참고 자료로 활용되어 정부가 추진하는 바다 내비게이 션 서비스 및 소형 송수신기의 보급 및 확산에 기여할 것으로 기대된다.