간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2025
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제27권 제1호 (2025년 2월) 27건
21.
2025.02
구독 인증기관 무료, 개인회원 유료
We developed a filling seal ring packing machine and carried out the conveying distance and container airtightness tests, and obtained the following results. As a result of testing whether the packaging paper is within 25mm of conveying distance and whether it is suitable for achieving the goal, the prototype with the target feeding distance of 23mm was shortened to 16.4mm for the right pavement line and 20.4mm for the left line, saving 80% compared to the existing one. As a result of the test of the automatic packaging machine for filling and sealing the air tightness of the container, it was confirmed that the air tightness was 100% maintained.
3,000원
22.
2025.02
구독 인증기관 무료, 개인회원 유료
With the electrification of mobility, various electric shuttle carts are produced as short-range transportation, and are used in golf courses, resorts, and amusement parks. The shuttle cart is driven at the low speed of 20km/h, and various passengers from 2 to 14 seats can be applied depending on the purpose of use. However, although the demand for 14-seat electric shuttle carts for short-range transportation is increasing, there are mainly imported, modified, and sold from foreign countries. In this study, the chassis frame for the 14-seat electric shuttle cart was designed, and structural stability was confirmed through CAE analysis. In addition, the frame of the chassis platform with SS400 material was manufactured. The chassis platform with powertrain, steering, braking, and suspension unit was developed and the performance test was confirmed.
4,000원
23.
2025.02
구독 인증기관 무료, 개인회원 유료
By developing molds and facilities to horizontally mold the functional part of the dry-cast concrete block, We intend to develop molds and a series of facilities to horizontally mold the functional part of the dry-cast concrete block to increase production per cycle while maintaining existing production methods and major facilities. In order to do so, CAE analysis is first required to develop molds and facilities for horizontally molding the functional part of the drycast concrete block in the horizontal direction. The procedure will be carried out by reviewing the validity of boundary conditions and physical properties, 3D modeling, grid generation, construction of analysis models, model validity, analysis according to frequency changes, and analysis according to physical properties. First, through the comparison of two-point support, three-point support, and two-point and three-point support in the constraint conditions, We would like to compare it with the actual molded product in the horizontal direction.
4,000원
24.
2025.02
구독 인증기관 무료, 개인회원 유료
The rotary type dust remover is a device in which the rake assembly filters and processes clumps in the water while rotating and repeating movements along the track. It is installed in the pump suction part of the drainage pump station and the rainwater pump station to protect the pump to ensure smooth drainage. Since the rake assembly plays a key role in filtering out complications while passing through the water, stainless steel is applied to all components constituting it, and damage or failure due to deformation causes a crisis in case of heavy rain. This is because the existing rake assembly is excellent in rigidity, but all components are assembled by welding, which takes a lot of time for repair and replacement. In this study, shape design for rakes and assemblies of the rotary type dust remover, structural analysis to secure reliability, and demonstration tests were conducted through prototype production. Through this, it is intended to help prevent the stiffness of the joint of the rotary type dust remover from deteriorating, reduce time and cost, and efficient operation.
4,000원
25.
2025.02
구독 인증기관 무료, 개인회원 유료
I would like to suggest a solution to the problem of aircraft battalion helicopter noise complaints. Among the noise evaluation units, the unit that meets the military helicopter noise evaluation is analyzed and selected to scientifically and reasonably resolve the conflict between residents in the neighboring area and the aviation battalion. Helicopter noise is one of the important problems causing pollution in various pollution problems in the area around the aircraft battalion. The rational and planned process of aircraft battalions will be a way to address aircraft noise pollution.
4,000원
26.
2025.02
구독 인증기관·개인회원 무료
In this study, the initial operation characteristics of a multi-type cooling system with three indoor units using an inverter compressor were investigated experimentally using a calorimeter. The operating characteristics of the cooling system were confirmed under the full load condition of simultaneous operation of three rooms and the partial load condition of individual operation of two or one room under the standard cooling conditions. The capacities of A, B and C are 50, 20, and 30% of the total capacity, respectively. The 3 room combination has 100% capacity, the 2 room combination has 50, 70 and 80% capacity, and the 1 room has 20, 30, and 50% capacity. The compressor condensing and evaporating pressures, the electronic expansion valve openings of indoor units A, B, and C, and the compressor operating frequencies were measured for 10 minutes after the cooling system was started. During the initial operation, the changes in the operating time and opening of the electronic expansion valve varied depending on the indoor unit combination and the operating load, and the relationship between the compressor pressure and the operating frequency was found.
27.
2025.02
구독 인증기관·개인회원 무료
Due to the special nature of the rotary type dust remover operating close to a river, more than 80% of the parts that make up the device are made of stainless steel. Stainless steel material is applied to the parts. In addition, sufficient rigidity is required, so the dimensions of the members that affect rigidity, including thickness, are applied excessively, resulting in a large weight. As a result, resistance increases during operation, lowering operating efficiency, and production and maintenance are costly and time-consuming, and maintainability is poor. In particular, when the rake blade is damaged, drainage by the pump cannot be smoothly achieved due to inoperability or performance degradation due to interference with other parts, which can cause serious damage to life and property due to flooding. Accordingly, in this study, a carbon material rake was developed to replace the existing stainless steel rake, and research was conducted to improve and optimize the problems of the existing rake.
1
2
