Bongik-dong, Kwonnong-dong, Ikseon-dong and Nakwon-dong are areas around Donhwamun-ro in Seoul. These residential areas began to be developed collectively from the 1920s and the construction period was the fastest among hanok residences collectively formed in urban center. At that time, houses were developed with high density. In the 1920s, many medium-sized plots of less than 3,300㎡ were distributed around Donhwamun-ro. Private developers such as Jeong Se-kwon(Konyangsa), Shin Tae-jong, and Yoon Heung-rim, who were active at the time, purchased medium-sized plots. Developers sold out the land directly or after constructing Hanok on the divided plot and then selling them. This method of developing hanok residences by private developers in the 1920s have influenced on hanok residences which began to be developed after the 1930s. Currently, many urban Hanoks still remain in areas around Donhwamun-ro. The initial aspects of the hanok development in the 1920s could be grasped through blocks, plot division, alleys, row house Hanok etc around Donhwamun-ro.

In this study, we developed a healthy snack using dried shrimp powder which is rich in calcium to help prevent bone disease. Different types of yanggaeng were prepared with varying ratios of dried shrimp powder; 1%, 3%, 5%, and 7%. Moisture content, color value, texture properties, and mineral concentration were measured. The L, a, and b chromaticity values showed significant differences in the 5% addition group (p<0.001). The texture properties, hardness, and adhesion decreased significantly as the amount of shrimp powder increased (p<0.001), while chewiness and elasticity significantly increased as the amount increased (p<0.001). Calcium and potassium increased significantly as the amount of shrimp powder increased (p<0.001).

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng μL-1] and 88.4 [ng μL-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng μL-1] and 74.8 [ng μL-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

With the advancement of industrialization, modern industry had sophisticated technology, and manufacturers also demanded high-precision measurement accuracy. Improving the quality level by increasing the reliability of measurement results as well as accurate measurement is a key issue to increase the competitiveness of today's manufacturing industry. In general, measurement results depend on tolerances in the industrial field, and it may be difficult to guarantee the reliability of the data in the case of an industry that deals with precision parts. Currently, measurement uncertainty is mainly applied to the calibration and test fields of instruments. This study is aim to apply measurement uncertainty as a way to improve the accurate analysis and reliability of measurement results in the industrial field. For this, precision parts connected by shaft and hole were selected among geometric elements, and roundness and cylindricity were measured using a roundness measuring instrument and CMM. And, taking into account the environment in which these measurements were made, factors affecting the measurement results were derived, and a mathematical model was established to calculate the measurement uncertainty. Applying uncertainty in the field in this way is expected to improve the level of quality and accurate analysis of measurement results.

This paper is to study the technology of inspection and history management systems for wind power that are continuously increasing around the world. In the past, inspections and analysis of major devices in renewable energy system have been operated in an analog way that identifies problems through photography and passive method. To improve this problem, we conduct a study on VR-based inspection history management system using 3D texturing technique of drone image. The paper describes the current status and prospects of wind power, research and development of wind power blade inspection and history management systems, experiments and reviews in the field, and expected effects and future utilization of this technology. It is expected that the latest technology for inspection and management of renewable system will be secured and introduced to the site through the development research of this system to reduce maintenance costs and power generation costs.

본 연구는 메꽃과 6종의 식물에 대해 신속하고 비파괴적으로 분류하기 위해 근적외선 (Vis-NIR) 스펙트럼을 이용하였고 데이터의 전처리와 머신러닝 기술을 적용하였다. 전국적으로 분포하는 메꽃과 6종에 대해 야외에서 휴대용 분광기를 이용하여 판별하였다. 식물의 잎의 표면에서 400~1,075 nm의 근적외선 스펙트럼 (1.5 nm)을 수집하였 다. 수집된 스펙트럼 데이터는 3가지의 전처리와 raw데이터를 이용하였고 4종류의 머신러닝 모델을 적용하여 높은 판별 정확도를 확인하였다. 전처리와 머신러닝 모델의 조합을 통해 분석된 판별의 정확도는 43~99%의 범위로 분석되었고, standard normal variate 전처리와 support vector machine 머신러닝 모델의 조합에서 판별 정확도가 98.6% 로 가장 높게 나타났다. 본 연구에서 수집된 스펙트럼은 식물의 성장단계, 다양한 측정 지역 및 잎에서의 측정 위치 등과 같은 요인과 더불어 데이터 분석을 위한 조건으로 최 적의 전처리와 머신러닝 기술을 적용한다면 메꽃과 식물의 야외에서의 정확한 분류가 가능하고 이들 식물의 효과적인 관리와 모니터링에 활용할 수 있을 것으로 판단되었다.

This study was performed as a part of serial experiments of applying convolutional neural network(CNN) in determining osteoporosis on panoramic radiograph. The purpose of this study was to investigate how sensitively CNN determine osteoporosis on cropped panoramic radiograph. Panoramic radiographs from 1268 female patients(mean age 45.2 ± 21.1 yrs) were selected for this study. For the osteoporosis group, 633(mean age 72.2 ± 8.5 yrs) were selected, while for the normal group 635(mean age 28.3 ± 7.0 yrs). AlexNet was utilized as CNN in this study. A multiple-column CNN was designed with two rectangular regions of interest on the mandible inferior area. An occluding method was used to analyze the sensitive area in determining osteoporosis on AlexNet. Testing of AlexNet showed accuracy of 99% in determining osteoporosis on panoramic radiographs. AlexNet was sensitive at the area of cortical and cancellous bone of the mandible inferior area including adjacent soft tissue.

월동기 논과 논두렁에서 서식하고 있는 다양한 절지동물의 발생밀도를 조사하여 생물다양성에 대한 정보를 제공하고자 본 연구를 수행하였다. 동력흡충기를 이용하여 논과 논두렁에서 각각 5지점씩 50×50 cm 격자 내에 있는 지표면과 식물을 흡입하여 채집하였다. 논과 논두렁에서 채집한 총개체수는 41,197개체였으며, 대부분 Collembola, Hemiptera, Diptera가 많이 채집되었다. 영농형태별 유기농법 재배지와 관행농법 재배지에서의 절지동물 출현패턴은 거의 유사하였으나 채집된 개체수는 유기농법 재배지에서 더 많았다. 종다양성지수, 종풍부도지수, 종균일도 지수는 논보다는 논두렁에서 모두 높게 나타났고, 시기별로 큰 차이를 보였는데 이는 통계적으로 유의하였다(P < 0.05).

Purpose: The purpose of this study is to understand the general nurses's experiences of missing patient identification. Methods: Participants were 12 nurses who experienced missing patient identification in general wards in hospitals. Data were collected with focus group interviews and individual in-depth interviews and data were analyzed using qualitative content analysis. Results: As the results of this study, 128 statements, 4 themes and 13 sub-themes were derived. The four themes derived were ‘Situations that we had not to check patient identification properly’, ‘Fear and pressure from the result of missing patient identification’, ‘Feeling guilty to the results of missing patient identification’and ‘Efforts to reassuring patient identification’. Conclusion: In order to prevent the failure of patient identification, we need specialized programs to cultivate patient safety culture not only for nurses, also patients and caregivers, and all departments of hospital. We also need institutional efforts and effective hospital investment and supports for accomplishing the goal.

본 연구에서는 강한 한파가 발생했던 2018년과 온난 한파가 발생했던 2019년의 기온에 따른 수온의 반응 및 지연시간과 북풍계 열 바람 빈도와의 상관관계를 분석하였다. 사용된 시간 자료는 국립수산과학원에서 제공하는 7개 지점 해역별 수온자료와 수온관측소 인 근 7개 지점 AWS 기온자료를 이용하였다. 관측되지 못한 자료는 내삽법으로 근사값을 계산하였고, FIR Filter를 이용하여 자료의 주기성을 파악하였다. 그 결과, 강한 한파가 발생했던 2018년은 북풍계열 바람을 통해 차가운 공기가 남하하면서 기온을 하강시켜 전 해역에 저수온을 유발한 반면 온난 한파가 발생했던 2019년은 평년 수준의 기온으로 하강하였지만 수온은 크게 변화하지 않았다. 강한 한파가 발생했 던 2018년 기온 하강에 따른 수온의 지연시간은 평균 14시간으로 0.7 이상의 높은 상관성을 나타냈고 온난 한파가 발생했던 2019년은 평균 지연시간이 20시간으로 0.44-0.67 사이의 상관성을 보였다. 본 연구를 통해 해역별로 기온 하강에 따른 표층수온의 반응을 해석하였고 지연시간을 파악함으로써 양식생물의 피해를 최소화하고 한파 피해의 신속한 대응에 기여할 수 것으로 기대한다.

This study tried to develop Jinmal dasik using pine nuts leaf powder with antibacterial and antioxidant properties. After preparing the Jinmal dasik in proportions of 0%, 2%, 4%, 6%, and 8% by varying the ratio of pine needle powder, the moisture, color, physical properties, antioxidant properties and sensory quality were measured. Except for the 8% Jinmal dasik, the L value of chromaticity significantly decreased as the amount of pine needle powder increased (p<0.001). In addition, the value significantly decreased with increased density (p<0.001). Based on our physical properties evaluation results, the hardness, cohesiveness, and elasticity decreased significantly as the amount of pine needle powder increased (p<0.001), but adhesion and chewiness increased significantly with an increase in the amount of pine needle powder (p<0.001). Total polyphenol content was significantly increased except for the 8% Jinmal dasik (p<0.001). DPPH and ABTS also increased significantly as the amount of pine needle powder increased (p<0.001). Our sensory evaluation, showed the 2% Jinmal dasik to have the highest degree of preference, however, there was no significant difference among the proportion groups (p=0.053).

This study analyzed the nutritional composition (proximate composition, total dietary fiber, calories, minerals, fatty acids, and amino acids) of 10 noodle products (tteok ramyun, jjamppong ramyun, kimchi ramyun, instant udon, cup ramyun, jajangmyun, bibimmyun, cream spaghetti, ssalguksu, and milmyun), which account for 85% of the cumulative intake of one or more key nutrients, using data from the 7th Korea National Health and Nutrition Examination Survey. The moisture contents of bibimmyun, jajangmyun, and cream spaghetti were lower than those of the other noodle products, whereas the crude fat, crude protein, carbohydrate, and calorie contents were the highest. Cream spaghetti had the highest mineral, fatty acid, and amino acid contents, followed by bibimmyun and jajangmyun. Ssalguksu had the lowest contents of most nutrients. These data could be used to populate a food composition database, which can provide consumers with the nutritional information about frequently consumed noodle products.

The Don-am district is a residential area that was supplied in 1936 as a land readjustment project(Tojiguhoekjeongri). The Don-am district was newly supplied with residential areas and urban hanoks were built in large numbers. The Don-am district was influenced by urban planning and legislation at that time. These affected in the layout and plan of urban hanok. Residential block in the Don-am district were developed sequentially from the late 1930s to the 1960s. Residential block were divided by modern construction company and sold by individual lots. The blocks supplied to the Don-am district made uniformly the corner out-off(Ga gak) for creating a vehicle-centered road. So urban hanoks located in the corner plot was transformed in response to the road. Residential blocks in Don-am district was divided into three to four rows. Therefore, alleys were created inside the block. Newly made alleys consist of a privately owned road(Sa-do), a public road(Gong-Do), and open space in the site. And the alleys were used as an entry space for sharing with neighboring. Urban hanoks of Don-am district have had changed and adapted to the formation of these alleys.

Subway trains with air cleaners have been newly deployed in the Seoul Metro system. The purpose of this study was to determine differences regarding in-cabin particulate matter with respect to concentrations less than 10 um (PM10) and 2.5 um (PM2.5) through the operation of air cleaners in subway trains. One subway train newly installed with in-cabin air cleaners on Seoul Metro Line number 2 was chosen monitoring in 2020. In-cabin air cleaners were turned-on at both front and back areas while those in the middle area were turned-off while the train was running. In-cabin PM10 and PM2.5 concentrations were measured in each area using a real-time aerosol monitor. Average in-cabin PM10 concentrations were statistically significantly lower (by 15%) in areas with air cleaners turned-on (43.8±12.1 μg/m3) compared to those areas where the air cleaners were turned-off (51.4±15.0 μg/m3). Average incabin PM2.5 concentrations were significantly lower (by 14%) in areas with air cleaners turned on (33.7±12.2 μg/m3) compared to those areas where air cleaners were turned-off (39.2± 14.4 μg/m3). In-cabin PM10 and PM2.5 concentrations ratios were similar regardless of area with air cleaners turned-on or turned-off. The in-cabin PM10 and PM2.5 concentrations were not associated with commute time. Use of air cleaners in subway trains effected reductions in in-cabin PM10 and PM2.5 concentrations.

This study was conducted to help manage total floating bacteria and fungi in the indoor air by studying the characteristics of total floating bacteria and fungi according to the indoor CO2 concentration of daycare centers. The sampling and analysis of samples was based on the indoor air quality process test method, and the result analysis was conducted using the SPSS statistical program to perform correlation and regression analysis. Correlation and regression results show that CO2 and total airborne bacteria showed positive relationships, but airborne mold did not show relevance. In addition, in order to identify factors affecting airborne mold, correlation analysis and regression analysis were performed regarding total airborne bacteria, PM10, PM2.5, HCHO, outdoor mold, I/O ratio, indoor temperature/ humidity, area per classroom and volume. The results showed that the factors affecting airborne mold were I/O ratio, outdoor airborne mold, and total airborne bacteria. Research results show that CO2 and total airborne bacteria can be reduced and controlled by natural ventilation, and in the case of airborne mold, mechanical forced ventilation such as hoods will be necessary due to the introduction of outdoor airborne mold. In addition, it is necessary to consider I/O ratio criteria in order to confirm effective indoor mold contamination, taking into account the effect of outdoor mold inflow.

국내산 표고의 식품성분 특성 및 항산화 활성을 알아보기 위해 시판되고 있는 표고 5종을 경남 진주, 전남 광양 및 순천 지역의 농산물 시장 또는 대형 마트에서 구입하여 분석하였다. 수분 함량은 79.17~82.90 g/100 g으로 시료 간의 차이가 적었으나, 조단백질 함량에서 유의적인 차이를 보였다. 무기질 총량은 시료 간의 유의적인 차이를 보였으며, 특히 칼륨(K)의 함량이 가장 많았다. 총 아미노산 및 필수아미노산의 함량은 표고 “A”에서 월등히 높았으나, 총 아미노산에서 필수아미노산 및 aspartic acid 와 glutamic acid의 함량 비율은 시료 간에 비슷한 수준이었다. β-Glucan 함량은 10.28~15.68 g/100 g으로 시료 간의 유의적인 차이를 보였다. 시판 표고의 색도와 전반적인 조직감에서는 시료 간의 두드러진 차이가 없었다. 총 페놀 함량은 19.92~30.77 mg/100 g, 플라보노이드 함량은 6.95~10.39 mg/100 g이었으며, 총 페놀 함량에 대한 플라 보노이드 함량의 비율은 31.53~38.21%였다. DPPH 라디 칼소거활성은 74.92~79.04%, ABTS 라디칼 소거활성은 80.47~84.97%로 시료 간의 큰 차이를 보이지 않았으나, 환원력은 195.23~317.85 μM로 시료 간의 유의차를 보였다. 본 연구 결과, 공시한 표고 5종의 식품성분이나 항산화 활성에서 두드러진 차이는 보이지 않았다.

Since its construction in the late 14th century, Hanyangdoseong had been carried out three major repairs and reconstructions during the 500 years of the Joseon Dynasty. In addition to the large-scale construction, small-scale construction continued until King Gojong era. In particular, in the 18th century, systematic construction management was implemented by the craftsmen and the military participated in the renovation of Hanyangdoseong in earnest, and the construction methods also developed rapidly. In the early 18th century, new construction techniques were attempted in various sections of the reconstruction work, and gradually became a common technology for repairing Hanyangdoseong in the late 18th century. The purpose of this study is to examine the characteristics and period of changes in the 18th century's construction technique, when the rapid development of Hanyangdoseong took place. To this end, the excavation results related to Hanyangdoseong, the remaining city wall, and the inscribed stones were used to identify and demonstrate the characteristics and change of the construction method.

2011년 동일본대지진에 의해 발생한 후쿠시마 원자력 발전소 사고와 최근 국내 지진 발생 빈도의 증가는 원자력 발전소의 지진 안전성에 대한 불안감을 야기하였다. 더불어 최근(2021년) 일본 동경전력은 후쿠시마 원전 오염수의 태평양 방류를 결정하였으며, 이로 인해 국내외 수산물을 통한 방사능 오염 가능성이 높아지면서 국민들의 우려가 급증하고 있다. 후쿠시마 원전사고 이후 해양으로 의 인공방사능 유입에 관한 연구는 국제적으로 많이 이루어졌으나, 한국인의 주요 식재료인 동아시아 연근해의 수산물에서 인공방사능의 분포 현황 및 축적에 대한 연구는 상대적으로 부족한 실정이다. 따라서 이 논문에서는 후쿠시마 원전사고 이후, 국내산 수산물에서의 원전 기원 인공방사능(예, 137Cs, 239,240Pu, 90Sr 등)의 분포 특성과 관련한 최근 연구 사례들을 소개하고자 한다. 또한, 후쿠시마 원전 오염수의 방류와 더불어 2030년까지 계획된 중국의 신규 원전 시설로 인한 향후 한반도 주변해역의 방사능 유출 영향에 대한 대비 및 사전 연구가 필요한 시점이기에 향후 연구 방향들을 제안하고자 한다.