본 연구는 시설토마토 재배지에서 push-pull 전략을 이용해 담배가루이와 천적곤충의 행동을 제어함으로써 담배가루이(Bemisia tabaci)를 친환경적으로 방제하기 위한 기술을 개발하고자 수행하였다. 담배가루이는 노란색에 유인율이 가장 높았으며, 520 nm의 광원에는 유인반응을 복합광원인 450 + 660 nm의 광원에는 회피반응을 보였다. 천적곤충인 담배장님노린재(Cyrtopeltis tenuis)와 미끌애꽃노린재(Orius laevigatus)는 모두 520 nm의 광원에 가장 높은 유인반응을 보였다. 휘발성 물질로는 ocimene과 carvacrol에 대해 기피반응을, methyl isonicotinate에는 유인반응을 보였다. 토마토 온실에 메밀을 투입하였을 경우 천적곤충인 담배장님노린재의 밀도는 무처리 대비 15일간 약 16배로 높게 유지되었다. Push-pull 세부전략들을 종합 처리한 결과, 처리 50일 경과 후 담배가루이의 트랩당 밀도는 무처리 대비 3배 이상 낮게 나타났으며, 이에 따른 시기 별 방제효과는 시간이 경과함에 따라 증가하는 경향을 보인 가운데 최고 68.7%였다.

남부지역에서 고구마 바이러스 무병묘의 정식시기 및 재배 기간에 따른 괴근 수량 및 씨고구마 생산량을 조사한 결과는 다음과 같다. 1. 바이러스 무병묘 정식시기에 따라 씨고구마로 사용하기에 알맞은 100~300 g 크기의 괴근 생산량은 6월 중순 정식 재배에서 ‘신율미’ 2,364 kg/10a, ‘풍원미’ 2,625 kg/10a 수준이었다. 2. 바이러스 무병묘를 7월 상순에 정식하여 재배하여도 씨고구마로 사용하기에 알맞은 100~300 g 크기의 괴근 수량은 ‘신율미’ 2,043, ‘진홍미’ 1,799, ‘다호미’ 1,390, ‘풍원미’ 1,985 kg/10a 정도가 생산되었다. 3. 고구마 바이러스 무병묘 정식 후 110일, 120일, 그리고 130 일 재배 시 씨고구마 수량은 ‘풍원미’ 1,605, 1,907, 1,834 kg/ 10a, ‘호감미’ 1,816, 1,771, 2,137 kg/10a 수준으로 생산되었다. 4. 수확 전 채취한 고구마 잎에서 SPLCV, SPFMV, SPVG, SPLV 등 4종 바이러스 이병 정도를 검정한 결과 정식시기, 재배기간 등 품종에 따라 약간 차이는 있으나 낮게 검출되어 다음해 씨고구마 종자로 문제가 없다고 판단하였다. 5. 바이러스 무병묘 대량 증식에는 시설과 노력이 많이 소요되고 증식량이 적어 면적 확대에 어려움이 있기 때문에 무병씨고구마를 생산하면 면적 확대에 유리하다. 무병묘가 소량 일 경우는 계속 증식하면서 7월 상순까지 본밭에 정식하여도 씨고구마 생산이 가능하였다. 금후에는 무병묘로 생산한 연차 간 씨고구마에 대해 품종별 수량과 품질 평가 후 씨고구마의 적정 갱신 주기를 설정하고자 한다.

This study was conducted to develop a technology for environmentally friendly control of Bemisia tabaci by a push-pull strategy in tomato greenhouse. B. tabaci was most attracted to the light source of 520nm, whereas it showed an avoidance response to the complex light treatment of 450+660nm. Two natural enemies, Nesidiocoris tenis and Orius laevigatus were attracted to 520nm. B. tabaci was repellent to volatile organic compounds, ocimene and carvacrol, while methyl isonicotinate showed attractant response. When buckwheat was added into the greenhouse, the density of N. tenis was maintained at about 16 times higher for 15 days. As a result of the combined treatment of push-pull strategy, the density of B. tabaci was 3 times lower and the control effect increased with time and reached up to 68.7%.

This study examined the nutrient components and measured the physicochemical properties of 23 Korean sweet potato cultivars. The proximate composition, free sugars, organic acids, and dietary fiber of sweet potato were analyzed and the water binding capacity, oil absorption and pasting characteristics were measured. The proximate composition was the highest in Happymi and was higher in colored sweet potato than in general sweet potato (p<0.05). The sucrose content was the highest among the free sugars in the general cultivars and yellow/orange colored cultivar. The major organic acids were oxalic acid, citric acid, malic acid, succinic acid, fumaric acid, and acetic acid. Oxalic acid and citric acid were high in the purple colored cultivars and malic acid was high in yellow/orange colored cultivars. Each total dietary fiber content of the general and colored cultivars was 7.51-13.94 and 13.04-16.97%, respectively, but there was no significant difference. The water binding capacity and oil absorption of Juhwangmi was high in all cultivars (p<0.05). The peak viscosity of sweet potato powder showed highest a significant difference of 12.50-1342 cP (p<0.05). The breakdown of Sincheonmi was 512, which was the highest value (p<0.05). The setback of Geonpungmi was significantly low, 6.0 (p<0.05).

본 연구는 국내 유통되고 있는 건조 농산물 중 33종의 고구마말랭이에 대하여 이산화황, 카로티노이드 함량 및 바실러스 세레우스 오염 정도를 조사하였다. 고구마말랭이의 시료별 특징에 따라 4가지의 군집으로 분류하여 각 군집간의 이산화황, 카로티노이드 함량 및 바실러스 세레 우스 함량을 조사한 결과, 각 군집간의 유의적인 차이는 나타나지 않았다. 33개의 고구마말랭이에서 잔류 이산화 황이 검출 범위는 0.38~28.16 mg/kg으로 기준인 10 mg/kg 이상으로 검출된 경우는 3건(9.09%) 이었지만, 고구마말 랭이의 이산화황 잔류 허용 기준치인 30 mg/kg을 초과하는 시료는 나타나지 않았다. 고구마말랭이는 카로티노이드에 대한 규격 기준이 없으므로 카로티노이드의 국·내 외 기준을 비교하였을 때, 본 실험에서 검출된 고구마말랭이의 카로티노이드 검출 범위는 46~2663 μg/100 g 로 카로티노이드의 함량 기준인 0~9,826 μg/100 g 의 범위 내로 확인되었다. 고구마말랭이 시료에서 바실러스 세레우스로 추정되는 집락은 대체적으로 검출되지 않았으며 7건(21.21%) 에서만 0.05~1.59 log CFU/g 범위로 검출되었지만 국내 기준치인 3 log CFU/g 은 넘지 않는 것으로 확인되었다. 본 연구결과는 건조 농산물 중 고구마말랭이에 대한 기준규 격 제정 시 품질 지표 기준으로 설정할 수 있는 기초자료 로서 활용될 것으로 판단되며 국내 유통중인 고구마말랭 이에 대한 품질 관리를 위해서는 원재료부터 건조 방법 그리고 포장 후 유통까지 안정하게 공정 과정이 진행되도 록 지속적인 관리 및 유지를 해야 될 것으로 사료된다.

In previous experiment, drying efficiency of infrared and hot air dryers was investigated. On this study, drying rate of sweet potato according to different infrared interval was performed to find the optimal interval range. Steamed sweet potato was cut to a thickness of 0.5cm, the width and length were 1.5*3cm. The condition of infrared drying was 60 to 40°C, which range of interval was adjusted 5 to 20°C. Moisture content, brix, color, and texture were estimated as quality parameters. Drying rate was increased with decreasing temperature range and soluble solid contents were increased as drying time was increased, but there was no difference after 4 hours. Hardness was resulted in highest value at small temperature range and hard texture was affected by drying time. However, there were no significant differences in L, a, b value. In conclusion, small interval range of infrared was indicated highest drying efficiency and the optimal condition of drying time was 4 to 6.

This study examined the quality characteristics of Jeung-pyeon made with wet non-glutinous rice flour and rice wine. The samples of Jeung-pyeon were prepared with different ratios of cooked purple sweet potato (0, 3, 6, 9, and 12%) to analyze the water content, sugar content, pH, chromaticity, texture characteristics, and sensory evaluation. No significant difference in water content, sugar content, and springiness was observed among the 5 samples. The pH and volume showed the highest level at 0%. The L-value and b-value decreased while the a-value increased. The hardness, chewiness, and gumminess were highest at 9% and lowest at 12%. The extent of violet chromaticity and pore size were optimal in 9%. In addition, 9%-added purple sweet potato showed the highest score of odor, taste, texture, and overall acceptability. In conclusion, the optimal addition for the highest acceptability of cooked purple sweet potato was 9%.

Sweet potato-malt worts were prepared by using sweet potato paste of Shinyulmi and Shinjami as the main adjunct, enzymes, malt, hop, and water. We brewed low-malt beers of the lager- or ale-type by using these worts and inoculating bottom and top fermenting yeast, respectively. Moreover, the componential and functional characteristics of the resulting beers were evaluated. During saccharification of sweet potato, the addition of an enzyme agent containing α-amylase caused an improvement in filterability and an increase of total sugar. The sugar content of sweet potato-malt wort which was prepared by the addition of 0.1% enzyme agent containing α-amylase and a three-step infusion procedure was 13.5 °Brix adequate for beer brewing. The polyphenol and anthocyanin contents of Shinjami beer were increased with increasing content of the paste, and also increased DPPH and ABTS radical scavenging activities. But in Shinyulmi beer it were decreased. A strong correlation was obserbed between antioxidave activities and polyphenol and anthocyanin contents of sweet potato beers. In all lager- and ale-type low-malt beers using 41.6% of Shinjami pastes, sensory attributes very similar to those of 100% malt beer were obtained and they were very good as they had unique red color.

Sweet potato [Ipomoea batatas (L.) lam] plant is known to have the relatively tolerance soil moisture deficit compared to other upland crops. However, recently, it has been causing plant growth inhibition and decrease storage quality due to the drought during the growing season of sweetpotato in Korea. The response of root elongation, leaf and shoot growth of sweet potato plantlets, cultivated under different water potential conditions were observed. Six varieties, such as yellow fleshed (Jinhongmi), dark-yellow fleshed (Daeyumi), dark-orange fleshed (Juhwangmi), light-orange fleshed (Dahomi, Pungwonmi), and purple fleshed (Sinjami) were used in this experiment. Using the follow water osmotic potential (WOP) levels were 0 (control), -0.05, -0.1, -0.2, -0.3, -0.4, -0.5 MPa by polyethylene glycol (PEG). In in vitro culture condition, ‘Jinhongmi’ has been inhibited rooting number and number of leaves less than 2, although slightly low WOP of–0.05 and –0.1 MPa, and at –0.2 MPa. shoot was not growing. ‘Daeyumi’, Dahomi, and Juwhangmi’ produced 2 roots as a low WOP of –0.3 MPa. and at –0.2 MPa., it appeared 2 or 3 leaves. ‘Pungwonmi’ produced similar to root number 3.9 at –0.1 MPa compared to control, but root weight decreased 75% at - 0.1 MPa more than control. Root did not grow at – 0.2 MPa for ‘Sinjami’. In nursery bed culture condition, roots fresh weight, number of leaves, and shoot length were inhibited according to the decreases of water osmotic potential. In the case of leaf area, ‘Jinhongmi’ and ‘Daeyumi’ was a significantly difference to 8.4, 22.6 cm3 at –0.2 MPa compared to control, respectively. No difference were obsered for ‘Dahomi’ at -0.1 and –0.2 MPa. ‘Pungwonmi’ was decreased 86% at -0.1 MPa compared to the control. ‘Juhwangmi’ and ‘Sinjami’ was a significantly difference to 15.5, 3.6 cm3 at –0.1 MPa compared to control of 22.9, 16.8 cm3, respectively.

Recently, additive-free sweet potato has been commercialized as a healthier snack food. However, these products are producing by semi-dried form to extend shelf-life, hence the products also possesses hard texture during chewing. To produce crispy sweet potato snack, this study was attempted to dry the semi-dried sweet potato instantly by a hot-press (HP) process. Mashed sweet potato was reformed and semi-dried at 65°C for varying time to provide various final moisture contents. The semi-dried samples were subjected to HP at the process temperature of 175-180°C for 2 seconds. As quality parameters, moisture content, brix, color, texture and sensorial test of the products were evaluated. Based on the results, optimal quality of the product was obtained by the semi-dried sample with 15~18% moisture at which the products exhibited good crispiness with bright yellow color. When the moisture content of the sample before HP was lower than 15%, the final products were normally broken during the HP process. In addition, extreme browning appearance was generated in this condition. Conversely, the sample with more than 18% of moisture was not completely dried by HP and the final product did not possess the crispy texture, although this product showed bright yellow appearance. Consequently, this study demonstrated the potential application of HP in sweet potato processing and the best condition was greatly affected by moisture content of sample prior to HP process.

The purpose of this study was to verify the drying characteristics of steamed sweet potato and to establish optimal drying conditions for far-infrared drying of steamed sweet potato. 4 kg of steamed sweet potato was sliced to thicknesses of 8 and 10 mm, and dried by a far-infrared dryer until a final moisture content of 25±0.5%. The far-infrared dryer conditions were an air velocity of 0.6, 0.8 m/s and drying temperature of 60, 70, and 80oC. The results can be summarized as follows. The drying time tended to be reduced as temperature and air velocity for drying increased. The Lewis and Modified Wang and Singh models were found to be suitable for drying of steamed sweet potato by a far-infrared dryer. The color difference was 35.09 on the following conditions: Thickness of 8 mm, temperature of 80oC, and air velocity of 0.8 m/s. The highest sugar content (59.11 oBrix) was observed on the conditions of a thickness of 8 mm, temperature of 80, and air velocity of 0.8 m/s. Energy consumption decreased on the conditions of higher temperature, slower air velocity, and thinner steamed sweet potato.

Food freezing preservation is an important process due to its high quality and long shelf-life. In order to improve the quality of frozen sweet potato stem, the freezing rate, thawing, and packaging method was optimized by the determination of physical properties. There was no significant difference among the treatment of freezing rate. Further, the drip loss of sweet potato stem was higher at a relatively fast freezing rate (immersion freezing) than at slow freezing rate (natural convection freezing at -20 or -40oC). For the comparison of packaging methods, the aircontaining packaged sweet potato stem had the lowest significant differences from the result of color, pH, and hardness. From the result of the drip loss, the high frequency and microwave using thawing samples were more effective than room temperature and water thawing. Therefore, fast freezing and thawing rate with air-containing package were recommended to obtain the better quality of sweet potato stem.