간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제20권 제4호 (2018년 8월) 25건
생산기술
21.
2018.08
구독 인증기관 무료, 개인회원 유료
In this study, the TRIZ methods were used to solve the main cause of the ink splashing phenomenon in a tattoo machine. To solve the ink splashing phenomenon that occurs when a tattoo machine is operated, a flow analysis of the needle unit was performed using ANSYS CFX V14.5. From the flow analysis result, it was confirmed that the ink splashing phenomenon of the tattoo machine can be supplemented by the hole leading to the outside to the needle unit of a tattoo machine. In order to diagnose the natural frequencies of the tattoo machine and the resonance phenomenon caused by the excitation of the motor, the natural frequency analysis was performed using the Abaqus/standard frequency analysis technique. From the results of the natural vibration analysis, it was confirmed that no resonance occurred. It is expected that it will contribute to improve the efficiency of the semi permanent cosmetic device with removable ink cartridge.
4,000원
22.
2018.08
구독 인증기관 무료, 개인회원 유료
In this study, high thermal efficiency and eco-friendly coffee roaster is developed. The core element of coffee roaster is a roasting drum and most of the coffee roasting drum is a flat cylindrical barrel type. From the traditional shape of cereal puffing machine, we got the idea of the roasting drum. Oak barrel shape is well known high thermal efficiency system in korean heating cook system. Therefore, we designed the coffee roaster containing the oak barrel shaped drum and combustor nozzles which has an ability of roasting 3kg of coffee beans within 10 minutes of roasting time. With our developed coffee roasting machine, the heating speed of roasting process is very fast, and the roasting of coffee beans can be quickly finished. We experimented the roasting time and compared the results with other coffee roasting machines of the same amount of roasting capacity. The results were outstanding in roasting time and the quality of roasting. In spite of smaller fuel consumption, the roasting time was more shorter than flat cylindrical roasting drum.
4,000원
23.
2018.08
구독 인증기관 무료, 개인회원 유료
In this study, the amount of abrasive wear was predicted effectively by FE simulation and experiment regarding the material and shape of the abrasive. In order to calculate numerically the amount of wear using the Archard wear equation, the normal load between the abrasive and the polyurethane was calculated by FE simulation. The sliding distance can be calculated according to the working conditions, and the hardness of the polyurethane is a known value. The wear coefficient K was calculated inversely by experimental measurement of the wear amount according to the working conditions of the abrasive. In order to verify the proposed calculation method, the wear amount was calculated by using the Archard wear equation by applying the calculated wear coefficient K with regard to arbitrary working conditions. The deviation between the proposed calculation results and the experimental results was within 10%. When the wear coefficient K is calculated by using the proposed method, the wear amount can be estimated. In addition, it was found that the change of the vertical load value concerning penetration depth was the main factor for determining wear amount.
4,000원
24.
2018.08
구독 인증기관 무료, 개인회원 유료
It is essential for medical equipment sterilization operations to prevent infections in the hospital. The low temperature plasma sterilization method using oxygenated water has the advantage of high efficiency and short time in sterilizing processes. However, a chamber which can hold constant vacuum condition without deformation is essential in the sterilizing system to apply plasma sterilization technique. In this study, therefore, the vacuum chamber is developed for 70 liter plasma sterilization device. The vacuum chamber is designed by checking the thickness, edge fillet value and rib of chamber through each simulation. And the performance of the chamber is investigated by vibrational modes and heat stress simulation. The prototype vacuum chamber is tested by experiments to verify the safety and efficiency for 0.1 Torr vacuum, and the result shows the expected vacuum level and displacement.
4,000원
25.
2018.08
구독 인증기관 무료, 개인회원 유료
The visual inspection device was developed for non-destructive test of piping from the inside. The developed components of the system can be classified as camera module, main body module named crawler module and system module. Because the system has driving part as electric motors, it can run not only the horizontal and vertical straight lines but also bend lines. The system has video processors, it can make it possible to display the video on the monitor and to save the video clips simultaneously. Several tests were performed to check the development objectives.
4,000원
1
2
