The most important factor in the processing of composite materials is the creation of burrs. In order to minimize the generation of burrs, the preceding researchers changed the shape and processing conditions of the tool. The developed composite material using carbon and aramid fibers has limitations in reducing the formation of burrs. In this study, in order to solve this problem, by applying a jig under the test piece during drilling, it was possible to perform high-quality hole processing with minimal burr generation.

We use vdW-corrected density functional theory (DFT) calculations with additional electron distribution correction to study the water binding chemistry of an Au nanoparticle supported on CeO2(111) with a linear step-edge. The initial structural model of Au/CeO2 used for DFT calculations is constructed by stabilizing a Au9 nanoparticle at the linear step-edge on a CeO2(111) slab. The calculated binding energy of a water molecule clearly shows that the interfacial site between Au and CeO2 binds water more strongly than the binding sites at the surface of Au nanoparticle. Subsequent water dissociation calculation result shows that the interface-bound water can be relatively easily dissociated into–OH and –H, providing a hydroxyl group that can be utilized as an oxygen source for CO oxidation. Based on the low dissociation energy of the interface bound water molecule, we suggest that the water at the Au-CeO2 interface can facilitate further oxidation of Au-bound CO. Our results point out that Au-CeO2 interface-bound water is beneficial for low-temperature oxidation reactions such as the water-gas shift reaction or preferential CO oxidation reaction.

최근 기후변화 및 국제교역량, 여행객, 외국 이주민 등의 증가로 국내 농작물에 큰 피해를 입힐 수 있는 고위험 식물 병의 국내 유입이 꾸준히 증가하고 있고 이에 따라, 검역기관 종사자들의 업무량도 늘어나고 있다. 특히 ‘Candidatus Liberibacter solanacearum’가 원인병원균인 감자 제브라칩병의 경우, 발생하게 되면 감자를 초토화시켜 막대한 피해를 야기한다. ‘Ca. L. solanacearum’의 감자와 토마토 등의 가지과(Solanaceae) 작물과 당근을 포함하는 산형과(Umbelliferae) 작물이 기주가 될 수 있다. 이에 본 연구에서는 아직까지 국내에 유입되지 않은 감자 제브라칩병과 매개충인 토마토 감자 나무이(tomato potato psyllid; TPP; Bactericera cockerelli Sulc.)에 대한 예찰 조사를 수행하였다. 예찰 조사를 위해 전국을 7개 권역(경기-강원, 충청, 전북, 전남, 경북, 경남 및 제주)으로 나누고, 각 권역에 속하는 3개 지역 중심으로 수행하였는데, 경기-강원 권역은 인천, 화성, 춘천 및 홍천, 충청 권역은 공주, 세종 및 청주, 전북 권역은 익산, 완주 및 정읍, 전남 권역은 보성, 고흥 및 순천, 경북 권역은 상주, 김천 및 안동, 경남 권역은 거창, 함양 및 진주, 제주 권역은 구좌 및 성산 지역이 해당되며, 지역당 3개 지점을 두고 조사하였다. 매개충 TPP 조사를 위해 끈끈이 트랩을 이용한 조사를 병행하였다. 예찰 조사는 2018년 9월부터 10월까지 2주 간격으로 실시하였다. 2018년 예찰 조사결과, 감자 제브라칩병과 매개충인 TPP는 국내에는 확인되지 않았다. 이 연구는 식물병을 조기에 탐지하기 위해 구축된 전국적인 모니터링 네트워크를 통해 수행할 수 있었고, 국외 외래유입병들의 예찰 조사를 위한 지역 거점을 확보하는데 기여하였다고 평가된다.

This study was conducted to investigate the effect of the power ranking of mares on their offspring’s stereotypies and response behaviors against a restraining of their desire to eat. Nine horses (2-4 years old) - three offspring born from three Haflinger mares over 3 years - were assigned to three experimental groups (High, Middle, Low) divided by the power ranking of mares. Three mares had no oral or locomotor stereotypic behaviors, but the higher the power ranking of mares, the more diverse and longer the duration of the oral stereotypies of their offspring (p<0.05). Although the offspring born from the high-ranking mare vigorously continued oral stereotypies until 3-4 years of age, there were no individuals that progressed to chronic locomotor stereotypies such as crib-biting, weaving, and box-walking. With an increase in the power ranking of the mare, the response of her offspring to the restraining of the eating desire (measured in terms of the frequency of the oral and locomotor stereotypies) increased (p<0.05). In conclusion, the oral stereotypies shown in this study are characteristic behaviors that occur during the growth process. However, in the case of riding horses, the offspring of a high-power ranking mare and/or one that reacted excessively against restrains, may be better observed and treated in a stall to manage stereotypic behaviors and correct the behaviors at their initial stage.

Electrochromic devices (ECDs) have been drawing great attention due to their high color contrast, low power consumption, and memory effect, and can be used in smart windows, automatic dimming mirrors, and information display devices. As with other electronic devices such as LEDs (light emitting diodes), solar cells, and transistors, the mechanical flexibility of ECDs is one of the most important issue for their potential applications. In this paper, we report on flexible ECDs (f-ECDs) fabricated using an all-in-one EC gel, which is a mixture of electrolyte and EC material. The f-ECDs are compared with rigid ECDs (r-ECDs) on ITO glass substrate in terms of color contrast, coloration efficiency, and switching speed. It is confirmed that the f-ECDs embedding all-in-one gel show strong blue absorption and have competitive EC performance. Repetitive bending tests show a degradation of electrochromic performance, which must be improved using an optimized device fabrication process.

This study aimed to investigate the characteristics of odor-causing substances in Yeosu national industrial complex, which is designated as an “Odor management Area,” in 2019 and the surrounding area. The sampling sites were divided into three areas: five sites within the industrial complex (Management area), one site within the borders of the complex (Boundary area), and two sites within residential areas (Affected area) affected by odors. The odor compounds were collected from March to September at dawn, daytime, and night. The analytical items were meteorological data, complex odor, legally-designated 22 odor compounds and other VOCs. Complex odor was exceeded on the limit three occasions at two sites in the management area. Ammonia, two types of sulfides, three types of aldehydes, and five VOCs were detected to be within the emission standards. Ammonia was the most frequently detected compounds. Aldehydes and sulfur compounds made a relatively high contribution to the level of odors. Therefore, aldehydes and sulfur compounds should be reduced first in order to prevent odors from occurring.

In this paper, the dynamic response was analyzed by performing linear dynamic analysis using historic earthquake loads on twisted-shaped structures and fixed structure among free-form high-rise structures with atypical elevation shape following prior studies. In addition, the dynamic characteristics of the analysis models according to the plane rotation angle of the twisted structure were compared and analyzed. As a result of the analysis, as the plane rotation angle of the twisted structure increased, the interlayer deformation rate increased in the high-rise part of 50th floors or more. The story shear force and the story absolute acceleration were similar in the entire structure. In the case of the story shear force, the response of the twisted shape model was rather reduced in the middle part. As a result of analyzing the dynamic response, the vulnerable layer where the response amplification of the twisted structure occurs was found to be 31st story.

Control performance of a smart tuned mass damper (TMD) mainly depends on control algorithms. A lot of control strategies have been proposed for semi-active control devices. Recently, machine learning begins to be applied to development of vibration control algorithm. In this study, a reinforcement learning among machine learning techniques was employed to develop a semi-active control algorithm for a smart TMD. The smart TMD was composed of magnetorheological damper in this study. For this purpose, an 11-story building structure with a smart TMD was selected to construct a reinforcement learning environment. A time history analysis of the example structure subject to earthquake excitation was conducted in the reinforcement learning procedure. Deep Q-network (DQN) among various reinforcement learning algorithms was used to make a learning agent. The command voltage sent to the MR damper is determined by the action produced by the DQN. Parametric studies on hyper-parameters of DQN were performed by numerical simulations. After appropriate training iteration of the DQN model with proper hyper-parameters, the DQN model for control of seismic responses of the example structure with smart TMD was developed. The developed DQN model can effectively control smart TMD to reduce seismic responses of the example structure.

In this study, we compare and analyze stress and vertical deflectional displacement according to cross sectional shape changes of the beam using finite element analysis. The 11,000mm long horizontal beam showed stress differences depending on the cross-sectional variation, with stress differences of up to 200MPa and at least 149MPa. The deflection at the end of the beam also differed by up to 586 mm and at least 208mm. The weight change applied according to the cross-sectional shape of the steel horizontal beam was up to 235kgf, at least 144kgf, and showed the best stress and deflection characteristics in the cross sectional shape with a weight of 185kgf. This allowed us to improve structural safety through sectional shape optimization despite the weight increase.

본 논문에서는 취향공동체가 오늘날 가장 넓은 범위에서 사회의 구심적 역할을 할 수 있을 것이라 판단하고 이의 형성과 확산에 관해 분석하였다. 다양성과 다원성을 존중하며, 빠르게 진전되는 비대면 사회에 적응 하기 위해 취향공동체에 관해 진지하게 논의해 볼 필요가 있다. 이에 본 논문에서는 21세기 취향공동체가 사회 구심점 역할을 할 수 있을지에 주목하였다. 코로나로 인하여 비대면 시대가 앞당겨 다가온 현재, 취향이 기술과 결합하여 우리 사회 내 새롭게 공동체를 응집시키는 대안이 될 수 있다고 판단한다. 본고에서는 우선 취향공동체 및 트랜스미디어 스토리텔링에 관한 선행연구를 진행하였으며, BTS의 트랜스미디어 스토리텔링 활용과 팬문화로서의 취향공동체 확산에 관하여 분석하였다.

The aim of this study was to evaluate the basic data of Cirsium setidens Nakai fine powder (FPC), which will then be used in the development of functional fooditems. We measures and evaluated the level of pectolinarin content, phenol content, flavonoids content, antioxidants and anti-obesity properties of FPC. Our results from the study showed that the pectolinarin, phenol, and flavonoids contents of FPC measured at 10.95±0.15 mg/g, 12.92±0.18 mg gallic acid equivalent (GAE)/g and 26.47±0.77 mg rutin equivalent (RE)/g, respectively. The exhibited antioxidant activity of FPC increased significantly depending on the dosage, and additionally. FPC did not show any cytotoxicity up to the dosage level of 500 μg/mL. During adipocyte differentiation, FPC significantly inhibited ROS production and lipid accumulation, compared with the control substance. These results suggest that FPC could be considered a promising resource of natural antioxidants and could serve a variety of health-improving roles in the production of functional food ingredients.

This study investigated the microbial community and quality characteristics of traditional soybean pastes (doenjang) based on the aging period in Gyeongnam province. The samples were collected from seven regions in Gyeongnam Province (Goseong, Hadong, Haman, Hamyang, Sacheon, Sancheong and Uiryeong). Contents of moisture, salinity, pH, and acidity of doenjang after 210 days aging were 56.40~65.21%, 9.05~16.08%, 4.88~6.86 and 0.64~2.14%, respectively. Lightness significantly decreased over the aging period, while the redness tended to increase over the aging period. Yellowness was from 21.39~26.81 to 21.10~28.36. Reducing sugar content was from 0.31~1.45% to 0.11~3.13%. The amino-type content increased from 141.87~495.13 mg/100 g to 328.53~823.67 mg/100 g. In contrast, the ammonia-type content declined from 136.74~364.70 mg/ 100 g to 128.62~331.00 mg/100 g. The overall total microbial count did not significantly differ, but it tended to decrease in sample GD4. Fungus declined overall or was not detected. Coliform groups were not detected in all samples. Lactobacillus and Bacillus cereus tended to decrease over the aging period. The common fungus and bacterium were Aspergillus oryzae and Tetragenococcus halophilus, respectively. After the aging period, the predominant fungi were Candida versatilis, Candida apicola, and Debaryomyces hansenii. The predominant bacteria were Tetragenococcus halophilus and Cronobacter sakazakii.

LMU(Leg Mating Unit)는 해양구조물의 플로트오버 실치에서 활용되는 장비 중 하나로 충격을 흡수하는 부분과 결합부로 구성된다. 본 연구에서는 최적설계를 통해 부유식 해양구조물의 플로트오버 설치용 LMU의 성능을 개선하여 설계 요구 조건을 만족하는 설계를 개발하였다. 초기설계는 고정식 해양구조물의 플로트오버 설치용으로 개발된 것의 제원을 참조하였으며, 초탄성재료의 거동을 표현하기 위해 Mooney-Rivlin 모델을 활용하였다. 설계민감도해석 결과를 바탕으로 중요도에 따라 설계 변수들을 선별하였고, 진화 알고리듬 기반 최적설계를 수행하였다. 최적설계 문제에서 목적함수는 LMU의 중량이며, 제약 조건은 LMU에 작용하는 최대 폰-미세스 응력과 LMU의 성능을 평가할 수 있는 반발력이다.

본 연구의 목적은 초보 코치가 전문코치가 되는 과정에서 어떤 체험을 하는지 그 체험의 본질적 의미와 구조는 어떠한지를 현상학적 방법을 통해 밝히는 것이다. 이 연구를 위해 2019년 12월 코칭 경력 1년에서 4년 이하의 코치 5명을 대상으로 2시간의 개별 심층 인터뷰를 진행한 후 전사한 자료를 Colaizzi(1978)가 제안한 분석틀을 바탕으로 이남인(2019)의 방법에 따라 수정보완 하였다. 자료의 체계적 관리와 타당도 확보를 위해 질적자료분석(QDA) 소프트웨어 중 MAXQDA20 프로그램을 활용했다. 분석 절차는 전사 자료를 읽고 의미 단위를 추출한 후 주제별로 묶고 그 주제군을 다시 범주화했다. 전체 294개의 의미 단위 중 연구 목적에 맞는 의미 단위는 124개였다. 124개의 의미 단위를 26개의 주제로 분류한 후, 다시 11개의 주제군으로 나눈 후 5개의 범주로 도출해냈다. 5개의 범주는 ‘KPC 자격시험에 합격하면서 전문코치로 인식하게 됨’, ‘자기와 타인과 연결됨’, ‘관점과 삶의 정향(定向) 전환’, ‘코칭을 비즈니스화 하는 능력의 필요성 느낌’, ‘코치의 자신감과 성장은 정비례’이었다. 본 연구는 초보코치에서 전문코치로 성장하는 공통의 체험을 통해 성장의 본 질적 의미를 밝히고 체험의 구조를 제시했다는 점에서 의의가 있다.

경상분지 하양층군의 퇴적시기와 기원지 변화를 밝히기 위해 청송 세계지질공원의 지질명소인 백석탄(일직층), 만안자암(점곡층), 신성리(사곡층) 지역에서 쇄설성 저어콘에 대한 U-Pb 연령측정을 실시하였다. 일직층에서는 백악기 저어콘이 발견되지 않고 쥐라기와 트라이아스기의 저어콘이 대부분이며, 선캄브리아 시대의 저어콘은 드물게 산출된다. 반면 점곡층과 사곡층은 백악기와 쥐라기, 고원생대의 저어콘이 우세하며 유사한 연령분포를 보인다. 점곡층과 사곡층의 백악기 저어콘에서 각각 103.2±0.3 Ma와 104.2±0.5 Ma의 가장 젊은 가중평균연령을 구했다. 연구결과에 의하면 점곡층 및 사곡층의 퇴적시기는 앨비안에 해당된다. 쇄설성 저어콘의 연령분포는 일직층과 점곡층 사이에 기원지의 중요한 변화가 있었음을 지시한다. 일직층은 주로 주변의 관입암체에서 퇴적물이 공급된 것으로 보이지만, 점곡층과 사곡층은 일본 남서부의 쥐라기 부가대의 비교적 젊은 퇴적단위로부터 기원한 것으로 해석된다.

본 연구에서는 같은 지역에 위치한 온실 3곳의 식별을 위해 통계적인 방법으로 분류를 하고자 주성분 분석(PCA)과 선형 판별 분석(LDA)을 수행하였다. 온실 내의 환경데이터는 같은 지역의 온실 3곳을 대상으로 4월 1일부터 4월 28일 총 4주간 1시간 간격으로 수집된 값을 사용하였다. 데이터를 분석하기 전, 데이터 정규화를 시키는 전처리를 거쳤으며, 전체의 80%인 훈련자료(training data)와 20%인 테스트 자료(test data)로 나누어 분석을 수행하였다. 분석을 수행한 결과, PC1은 57.51%의 설명력으로 PC1 = 0.7118112 × Tem. –0.6830065 × Humi. –0.1637892 × CO2.의 식을 가지며, LD1은 67.06% 의 설명력으로 LD1 = 0.8622565 × Tem. –0.1805741 × Humi. + 1.4018140 × CO2. + 0.03040701의 식을 가지는 것으로 나타났다. 이렇게 미리 분류시켜 놓은 온실의 데이터를 바탕으로 새로운 환경의 데이터를 입력하였을 때 특정 그룹으로의 분류가 가능함으로써 데이터의 성향을 파악할 수 있다. 이러한 데이터는 식별을 용이하게 함으로써 데이터의 활용도를 높여주는 방법이라고 판단된다.

In this study, experiments and simulations were performed for fillet joint friction stir welding according to tool shape and welding conditions. Conventional butt friction stir welding has good weldability because heat is generated by friction with the bottom of the tool shoulder. However, in the case of fillet friction stir welding, the frictional heat is not sufficiently generated at the bottom of the tool shoulder due to the shape of the tool and the shape of the joint. Therefore, it is important to sufficiently generate frictional heat by slowing the welding speed as compared to butt welding. In this study, experiments and simulations were carried out on an aluminum battery housing made by friction stir welding an extruded material with a fillet joint. The temperature of the structure was measured using a thermocouple during welding, and the heat source was calculated through correlation analysis. Thermal elasto-plastic analysis of the structure was carried out using the calculated heat source and geometric boundary conditions. It is confirmed that the experimental results and the simulation results are well matched. Based on the results of the study, the deformation of the structure can be calculated through simulation even if the tool shape and welding process conditions change.