영남 평야지에서는 추석전 햅쌀 출하를 목적으로 조기재배나 극조기재배가 증가하고 있는 추세이다. 그러나 극조기 벼 수확 이후에 후작물로 적합한 작목이 없어서 휴경을 하는 농가가 많아 적합한 작부체계 개발을 위한 재배법 개발이 필요한 실정이다. 따라서 본 시험은 극조기 벼 수확 후 이모작 작부체계에 적합한 벼 품종 및 재배시기 설정을 위해 수행하였다. 조생종 14개 품종을 4월 7일, 4월 14일, 4월 21일, 4월 28일에 각각 이앙하였을 때, 극조기 벼 이모작을 위한 기준 출수기인 7월 10일 이전에 출수가능한 품종은 백일미, 주남조생, 중모1032, 진옥이었다. 이 품종들의 적산온도로 추정한 적정 이앙시기는 4월 10일에서 4월 20일 사이로, 이 시기에 이앙할 경우 8월 20일 이내에 수확이 가능하여 8월 하순 후작물과의 작기연결성에 유리한 적합 품종으로 판단된다.

In this study, we examined the residual amounts of formaldehyde in hygiene products to determine the safety of these products in Gyeonggi-do. Formaldehyde is among the harmful substances that may remain within certain hygiene products. On the basis of an analysis of formaldehyde in a total of 222 items (6 disposable paper straws, 9 disposable paper napkins, 21 toilet papers, 13 disposable dishcloths, 16 disposable paper towels, 32 wet wipes for food service restaurants, 25 disposable cotton swabs, and 100 disposable diapers), we detected traces in three wet wipes for food service restaurants (1.87 to 4.45 mg/kg), which is approximately 9% to 22% of the standard level (20 mg/kg). We established that all the hygiene products assessed in the study met the individual standards for formaldehyde, thereby confirming that safe products are being distributed. In the standards and specifications for hygiene products, the formaldehyde test method is regulated for application with respect to three categories based on the type of product. The samples used in this study were of types for which method 1 or method 2 is applied, and the limits of detection, limits of quantification, linearity, and recovery rates were reviewed to verify the validity of each test method. When method 2 was applied, we experienced interference when performing analysis at a wavelength of 412 nm, which was associated with the influence of impurities in some samples of disposable cotton swabs and disposable diapers. Consequently, in these cases, the results were compared after analysis using method 1. By comparing the results obtained using method 2 with those obtained using method 1, the latter of which were unaffected by the interference of impurities, we were able to detect formaldehyde at low concentrations. These findings accordingly highlight the necessity to standardize the formaldehyde test method for future analyses.

목적 : 본 연구는 신체적 기능장애인을 대상으로 장애수용, 자아존중감, 우울, 인권이 삶의 만족도에 미치 는 영향을 알아보고자 하였다. 연구방법 : 한국장애인개발원의 장애인삶 2차 패널조사에 참여한 6,121명 중 신체기능 장애인 1,780명의 데이 터를 추출하여 일반적인 특성, 장애수용, 자아존중감, 우울, 인권 항목을 분석하였다. 자료는 기술 통계, 피어슨 상관분석, 다중회귀분석을 실시하여 분석하였다. 결과 : 신체기능 장애인의 장애수용, 자아존중감, 우울, 인권과 전반적인 삶의 만족도는 유의미한 상관관계 를 보였다. 우울감이 낮을수록, 장애수용과 자아존중감, 인권이 높을수록 삶의 만족도에 긍정적인 영향을 보였다. 장애수용, 자아존중감, 우울, 인권이 전반적인 삶의 만족도에 미치는 영향은 41%의 설명력을 보 였다. 결론 : 신체적 기능장애인의 긍정적인 삶의 만족도를 위하여 장애인 자신의 긍정적 장애수용, 지역사회의 심리정서적 지원과 함께 비장애인들의 장애인식에 따른 관점변화가 이루어질 필요가 있다.

High-risk microbial pathogens are handled in a biosafety laboratory. After experiments, the pathogens may remain as contaminants. To safely manage a biosafety laboratory, disinfection of microbial contaminants is necessary. This study was carried out to evaluate the effect of UV-C irradiation for the disinfection of a high-risk plant pathogenic bacterium Erwinia amylovora in a laboratory setting. For the test, the bacterium (8.7 × 106 CFU/ml) was embedded on the surface of PDA and placed on the work surface in a biosafety cabinet (Class 2 Type A1), and on the three different surfaces of the laboratory bench, laboratory bench shelf, and the floor which were positioned in a straight line from the UV lamp installed in the ceiling of the biosafety laboratory (BSL 2 class). UV-C irradiation was administered for 10min, 30min, 1 hr, 2hr, 3 hr, and 4hr, respectively. The reduction rate of bacteria ranged from 95% to 99% in regard to 10 min irradiation, from 97% to 99% in regard to 30 min irradiation, from 99.8% to 99.9% in regard to 1 hr irradiation, and higher than 99.99% in regard to 2 hr irradiation. The bacterium was completely inactivated after 3 hr irradiation. A similar UV-C irradiation effect was obtained when the bacterium was placed at a distance of 1 m from the three different surface points. Bacterial reduction by UV-C irradiation was not significantly different among the three different surface points.

This study aims to measure sedimentation status change with the changes in internal pressure for dry chemical extinguishers of various use periods and analyze the suitability of the fire extinguishers' performance criteria. When the internal pressure of the fire extinguisher is 0%, 2 out of 10 new dry chemical powders for the 5 elapsed years were noted to be suitable, including 3 recycled dry chemical powders with 5 elapsed years that were found eligible. One out of 10 new dry chemical powders for 10 elapsed years was shown as suitable. Also, one new dry chemical powder for 13 elapsed years was suitable. When the internal pressure of the fire extinguisher was 50%, all 10 out of 10 new dry chemical powders for 5 years, recycled one with 5 elapsed years, and a new one with 10 elapsed years were found to be suitable, while 9 new dry chemical powders for 13 years were shown as suitable. When the internal pressure of the fire extinguisher was normal, new ones with 5 elapsed years, recycled ones with 5 elapsed years, new ones with 10 elapsed years, and new ones with 13 elapsed years were all 10 out of 10 samples noted as suitable. In summarizing the experiment results, it was found that the sedimentation status, one of the fire extinguisher's physical properties experiments, affects the fire extinguisher's performance criteria rather than the change with use periods.

The present study investigated the effects of forage cutting and baler mixing on the chemical compositions, fermentation indices, and aerobic stability of whole crop rice (WCR) haylage. The WCR (“Youngwoo”) was harvested at 48.4% dry matter and ensiled into a 300 kg bale silo with forage cutting (whole crop without cutting vs. 5 cm of cutting length). The WCR forages were ensiled without baler mixing process (CON) or with (MIX). The concentrations of dry matter, crude protein, ether extract, crude ash, neutral detergent fiber, and acid detergent fiber of whole crop rice before ensiling were 48.4, 9.70, 2.57, 6.11, 41.2, and 23.5%, respectively. The forage cutting did not affect the chemical compositions, fermentation indices, microbes, and aerobic stability of WCR haylage (p>0.05). The CON haylages tend to be higher in NDF content (p<0.10). The MIX haylages had lower in lactate (p=0.019), and lactate:acetate ratio (p<0.001). The MIX haylages had higher in lactic acid bacteria (LAB) (p=0.010). Therefore, this study concluded that the fermentation quality of WCR haylage improved by baler mixing, but had no effects by forage cutting.

Broad bean wilt virus 2 (BBWV2) is a species in the genus Fabavirus and family Secoviridae, which is transmitted by aphids and has a wide host range. The BBWV2 genome is composed of two single-stranded, positive-sense RNAs, RNA-1 and RNA-2. The representative symptoms of BBWV2 are mosaic, mottle, vein clearing, wilt, and stunting on leaves, and these symptoms cause economic damage to various crops. In 2019, Perilla fructescens leaves with mosaic and yellowing symptoms were found in Geumsan, South Korea. Reverse-transcription polymerase chain reaction (RTPCR) was performed with specific primers for 10 reported viruses, including BBWV2, to identify the causal virus, and the results were positive for BBWV2. To characterize a BBWV2 isolate (BBWV2-GS-PF) from symptomatic P. fructescens, genetic analysis and pathogenicity tests were performed. The complete genomic sequences of RNA-1 and RNA-2 of BBWV2-GS-PF were phylogenetically distant to the previously reported BBWV2 isolates, with relatively low nucleotide sequence similarities of 76-80%. In the pathogenicity test, unlike most BBWV2 isolates with mild mosaic or mosaic symptoms in peppers, the BBWV2-GS-PF isolate showed typical ring spot symptoms. Considering these results, the BBWV2-GS-PF isolate from P. fructescens could be classified as a new strain of BBWV2.

In this study, a study on the design of the rake shape of a rotary screener is conducted. The rake bar and rake of a rotary screener were designed, and three types for the rake shape were designed by changing the rake shape. Structural analysis was conducted in consideration of the vertical load applied when the narrow object was pulled up by the rake and the friction force applied underwater, and the more efficient type was verified by comparing the stress and strain applied to the lake by shape. In addition, structural analysis was additionally performed by changing the material of the rake to a carbon composite material in the same manner. That is, in order to improve the need to replace the entire rake part in case of damage, we will examine the improvement of the strength of the rake by performing structural analysis by changing the material of the rake.

최근 3차원 영상 데이터 활용 기술이 주목받으며 레이저 스캐너, 깊이 카메라와 같은 장비를 활용하여 작물의 생육을 측정하려는 연구가 시도되고 있다. 작물의 생육 특성을 측정할 때 3차원 영상 데이터를 활용한다면 평면 데이터에서 측정하지 못한 구조와 형태 정보를 이용할 수 있는 장점이 있다. 본 연구에서는 콩의 생육 특성을 3차원 영상 데이터를 활용하여 추정하였다. 깊이 카메라를 이용하여 콩의 개화시(R1), 착협기(R3), 종실비대기(R5) 에 촬영하고 3차원 데이터로 개체의 초장과 엽면적을 추정하고 실측 값과 비교하였다. 초장 추정을 위해 평면에 투영된 개체의 무게 중심을 이용하여 원줄기의 x, y 좌표 위치를 지정하였는데 눈으로 보고 지정한 원줄기의 위치와 무게 중심 점의 x, y 좌표 위치는 높은 결정 계수를 보였다. 초장 추정의 경우 콩의 구조와 형태가 발달함에 따라 3차원 영상에서 지면으로부터 개체 상단 지점 간 거리를 이용하는 방법은 실측과 추정 값간 오차가 컸다. 엽면적 추정을 위해서 3차원 위치 값을 갖는 개체 표면 점들을 높이에 따라 분할하고 각 높이 구간의 면적을 계산하였다. 3차원 데이터 병합 과정에서 늘어난 점 개수로 인해 각 높이 구간에서 계산된 면적이 증가하였기 때문에 추정 값은 과대평가되었다. 향후 3차원 영상을 이용한 보다 정밀한 생육 조사를 위해서는 작물 고유의 생육변수 특성을 고려한 데이터 전처리 과정과 분석 방법 개발이 필요할 것으로 사료된다.

The external weather conditions including temperature and wind speed in the Saemangeum reclaimed land is different from that of the inland, affecting the internal environment of the greenhouse. Therefore, it is important to select an appropriate covering material considering the insulation effect according to the type and characteristics of the covering material considering the weather condition in the Saemangeum reclaimed land. A hexahedral insulation chamber was designed to evaluate the insulation efficiency of each glass-clad material in the outside weather condition in reclaimed land. In order to evaluate the insulation effect of each covering material, a radiator was installed and real-time power consumption was monitored. 16-mm PC (polycarbonate), 16-mm PMMA (polymethyl methacrylate), 4-mm greenhouse glass, and 16-mm double-layered glass were used as the covering materials of the chamber. In order to understand the effect of the external wind directions, the windward and downwind insulation properties were evaluated. As a result of comparing the thermal insulation effect of each greenhouse cover material to single-layer glass, the thermal insulation effect of double-layer glass was 16.9% higher, while PMMA and PC were 62.5% and 131.2% higher respectively. On average the wind speed on the windward side was 53.1% higher than that on the lee-wind side, and the temperature difference between the inside and outside of the chamber at the wind ward side was found to be 52.0% larger than that on the lee ward side. During the experiment period, the overall heating operation time for PC was 39.2% lower compared to other insulation materials. Showing highest energy efficiency, and compared to PC, single-layer glass power consumption was 37.4% higher.

In this paper, the mechanical properties of glass fiber reinforced plastic (GFRP) rebar, which has been applied as an concrete reinforcement, and produced carbon fiber reinforced plastic (CFRP) grid were compared to develop a concrete reinforcement material with excellent mechanical properties. In addition, the mechanical properties of CFRP prepared with each molding process were evaluated. Three molding processes were evaluated: prepreg oven bagging, reaction injection molding (RIM), and pultrusion. The tensile strength of the CFRP grid prepared through pultrusion was 2.85GPa, the elastic modulus was 169.81GPa, and the strain was 1.68%, which was 2.85 times better in tensile strength, and 2.83 times better in elastic modulus compared mechanical properties of GFRP rebar. The strain was confirmed to be equivalent to GFRP rebar.

This study was conducted to provide basic data on the amount of sodium and the setting of permissible error range of actual measurement, which is a problem for cabbage kimchi nutrients subject to labeling. The sample targeted was baechu (Kimchi cabbage) kimchi, which might have a large variation in sodium content by part of kimchi. Kimchi samples were collected twice from eight companies by season (spring, summer, fall, and winter). The average sodium content in kimchi samples was 619±87 mg/100 g (range, 534±63 mg/100 g to 783±40 mg/100 g). The error in average annual sodium content of abandonment kimchi (maximum value difference compared to the minimum value) was 26.8 to 64.3%. Sodium contents in kimchi produced in spring and summer were relatively low. However, deviation between individuals was large. It was found that cases exceeding the permissible error (120%) standard varied depending on the criteria for setting the amount of sodium. In addition, due to seasonal differences, sodium content in kimchi exceeded 120% of the labeling value. Thus, it is necessary to set standards suitable for characteristics of kimchi to prevent unintentional violations of labeling standards by raw materials and manufacturing processes.

Due to the rapid growth of electrical vehicle and portable electronics markets, huge amount of the rare earth elements (REEs) and lithium have been required for the manufacturers globally. Moreover, after life time of the battery pass, the waste batteries containing valuable metal resources should be recycled due to competitions between the countries who manufacturing the batteries. Therefore, the REEs and lithium recoveries from the e-waste and wastewaters become issue recently. However, the commercialized technology for the valuable metal recovery is limited. In this study, the uses of the REEs and other valuable metal resources such as lithium, uranium, and gold and there recoverying methods according to the different water conditions were investigated and summarized. Moreover, the possible expectations and suggestions for the future application of the valuable resource recovery were conducted as a review.

This study analyzed Tuber melanosporum, Tuber aestivum,and Tuber magnatum, specifically the content of β-glucan, amino acids, nucleic acid-related substances, vitamin C, and ergosterol. The β-glucan content was highest in T. magnatum (20.54%). The free amino acid content was highest in T. aestivum, with the major amino acids being cystine, glutamic acid, and aspartic acid. The total amino acid content was the highest in T. magnatum, the primary amino acids being cystine, glutamic acid, and lysine. The content of nucleotide related compounds was the highest in T. magnatum (5.09 mg/100 g). The highest content of vitamin C (10.15 mg/100 g) and ergosterol (596.91 mg/100 g) was found in T. magnatum, which had the highest useful component content among the three truffles. Additional studies investigating the variation in useful components according to collection time and growth environment are needed.

콘크리트 바닥판의 파손 등으로 인하여 강합성 거더 교량의 생애주기가 짧아짐에 따라 프리캐스트 바닥판을 사용한 모듈화 공법에 대한 연구가 활발히 진행되고 있으나, 바닥판의 해체 시 발생하는 분진 및 소음으로 인한 환경적 측면에 대한 연구는 미흡한 실정이다. 본 연구는 기존 용접 스터드 볼트를 대체할 수 있는 볼트 접합 전단연결재의 성능을 검증하기 위하여 정적강도 실험 및 피로강도 실험을 수행하였다. 실험결과 200만 회 피로하중에 대하여 실험체의 균열 및 파괴 양상은 관측되지 않았으며, 이후 실시한 잔류강도 실험 또한 정적강도 실험과 동일한 것으로 확인되었다.

For the selective catalytic reduction of NOx with ammonia (NH3-SCR), a V2O5WO3/TiO2 (VW/nTi) catalyst was prepared using V2O5 and WO3 on a nanodispersed TiO2 (nTi) support by simple impregnation process. The nTi support was dispersed for 0~3 hrs under controlled bead-milling in ethanol. The average particle size (D50) of nTi was reduced from 582 nm to 93 nm depending on the milling time. The NOx activity of these catalysts with maximum temperature shift was influenced by the dispersion of the TiO2. For the V0.5W2/nTi-0h catalyst, prepared with 582 nm nTi-0h before milling, the decomposition temperature with over 94 % NOx conversion had a narrow temperature window, within the range of 365-391 °C. Similarly, the V0.5W2/nTi-2h catalyst, prepared with 107 nm nTi-2h bead-milled for 2hrs, showed a broad temperature window in the range of 358~450 °C. However, the V0.5W2/Ti catalyst (D50 = 2.4 μm, aqueous, without milling) was observed at 325-385 °C. Our results could pave the way for the production of effective NOx decomposition catalysts with a higher temperature range. This approach is also better at facilitating the dispersion on the support material. NH3-TPD, H2-TPR, FT-IR, and XPS were used to investigate the role of nTi in the DeNOx catalyst.