Soluble Cutting Fluids (SCFs) have been used in metal machining processes to improve the quality of metal processing equipment and products. Although SCFs are useful and essential material, wasted soluble cutting fluids are harmful in hydroecological systems because of the high concentration of COD and nitrogen material. If discharged to hydroecological systems without specific treatment, they may cause eutrophication in rivers and lakes. Therefore, the removal efficiency of the COD contained in the SCFs is investigated in this study using electrochemical treatment with an insoluble electrode. The electrode was made of titanium with iridium plating, made from a perforated metal sheet to agitate the sample in the reactor. Cathode and anode electrodes were inserted into acrylic reactor alternately and the reaction time was one hour. The experimental results were as follows: First, for 60 A/m2, 80 A/m2, and 100 A/m2 current densities, the COD removal efficiencies were 42.0%, 63.9%, and 78.4%, respectively.

The use of Soluble Cutting Fluids (SCF) is essential in the development of industrial technology. However, it is difficult to decompose biologically due to its high concentrations of organic substances and nitrogen compounds, which interfere with microbial growth. Recently, Advanced Oxidation Processes are being studied both domestically and internationally. Electrolysis is highly adaptable industrial wastewater treatment because it has high removal efficiency and short processing time, regardless of the contaminant’s biodegradable nature. Accordingly, this study shows the characteristics of total nitrogen removal in SCF on the operating time, current density, and electrolytes when using aluminum in a batch-type reactor. The results are as follows: ① Under the condition of without the electrolyte when the current density was adjusted to 40 A/m2, 60 A/m2, or 80 A/m2, the respective T-N removal efficiencies were 71.7%, 80.6%, and 87.2% at 60 min. ② In the comparison for the condition of whether NaCl was added, the removal efficiency of adding NaCl (5 ~ 10 mM) was higher than non-addition at 60 min for all current densities. ③ In the comparison for the condition of whether Na2SO4 (5 ~ 10 mM) was added, the removal efficiency when adding Na2SO4 showed no significant difference compared to non-addition at 60 min for all current densities.

Soluble cutting fluids (SCFs) have been used in metal machining processes to improve the quality of metal processing equipment and products in modern society. Because the characteristics among metal machining processes differ, various types of cutting fluids are manufactured to enhance the cutting efficiency of different metals. Although SCFs are useful and essential materials, particular treatment is required attributable to the high concentration of nitrogen materials and chemical oxygen demand (COD). In this study, the removal efficiency of total nitrogen (T-N) contained in SCFs was analyzed using electrochemical treatment. The electrode was made of 316 stainless steel, which had been perforated to prevent an imbalanced sample concentration in the reactor. Cathodic and anodic electrodes were alternately inserted into an acrylic reactor. The removal efficiency of T-N in SCFs using 40 A/m2, 60 A/m2, and 80 A/m2 current density, was 48.2%, 61.5% and 69.3%, respectively. The removal efficiency of T-N in SCFs with the addition of 0, 5 mM, and 10 mM NaCl was 69.3%, 74.6%, 77.6%, respectively.

현대사회는 건강에 대한 관심이 높아지면서 웰니스 시대에 접어들었고 그로 인한 제품의 수요도 증가하고 있다. 본 연구의 배경 및 목적은 식문화의 다양화와 기후변화에 의한 각종 세균이나 바이러스에 의해서 발생되는 장염, 식중독 등의 질병이 문제가 되고 있는 현 시대에 이를 예방하기 위한 가정용 자외선 살균기 디자인 개발을 하고자 하는 것이다. 디자인 개발을 위한 연구의 방법 및 내용으로는 첫째, 문헌조사를 통한 UV 살균기술의 이해와 가정에서 사용되는 칼과 도 마의 일반적인 살균 보관기능을 가진 제품 및 UV를 이용한 제품의 시장 동향 및 디자인권 출원 추이를 통한 디자인 현황 을 살펴보고 동종⋅유사 제품에 대한 시장 현황에 대해 조사하였다. 둘째, 위의 문헌 조사를 통해 제품의 문제점과 개선방 안을 도출하고 사용자 분석 및 디자인 트렌드 분석을 진행하여 디자인 키워드와 방향성을 도출하였다. 마지막으로 도출된 컨셉을 기반으로 아이디어 스케치, 3D 시뮬레이션 등 단계별 디자인 프로세스를 적용하여 전문가와 소비자평가를 통해 최 종 디자인 개발을 진행하였다. 본 연구에서 제시한 가정용 자외선 칼⋅도마 살균기의 제품 디자인 개발은 사용자 경험 분 석 및 디자인 트렌드 분석을 통하여 개발된 디자인 개발과 살균과 건조 기능이 융합된 제품으로 향후 소비자들의 니즈를 만족시키며 건강한 식문화와 삶을 위한 가치 창출을 기대할 수 있을 것이다.

This study was conducted to dentify the optimum plantlet type of ‘Solara’ potatoes (Solanum tuberosum L.) for growth in an aeroponics system. Plantlets of ‘Solara’ were transplanted on March 16, 2015 in a greenhouse, and growth and yield characteristics were investigated at 70 and 78 days after transplanting, respectively. Stem length was shorter in plantlet of 15-day-old stem cuttings and acclimatization of culture, and the stem length of plantlets of stem cuttings tended to increase with increasing stem cutting age. The fresh weight of plants was the highest in the plantlets of 40-day-old stem cuttings and the lowest in non-rooted stem cuttings and acclimatization of culture. The highest number of first stolons was obtained in 35-day-old stem cuttings. The number of second stolons was the highest in plantlets of 35-day-old stem cuttings, acclimatization of culture, and 30- day-old stem cuttings. The total number of tubers was higher in plantlets of 35-day-old stem cuttings and acclimatization of culture, and the number of tubers above 3 g was the highest in plantlets of 35-day-old stem cuttings. The weight of tubers above 3 g was the heaviest in plantlets of 35-day-old stem cuttings(1,947 g per 10 plants), followed by plantlets of 30-day-old stem cuttings. These results indicate that plantlets of 30 to 35-day-old stem cuttings could be the best for production of ‘Solara’ potato tubers in an aeroponics system.

2012년 현재, 국내 광공업 중 자동차 및 트레일러 제조업, 금속가공제품 제조업 등 금속가공을 필요로 하는 사업체는 전체 광공업 사업체 중 약 40%를 차지하고 있으며, 이와 같은 금속가공 과정에서 필요로 하는 것이 절삭유이다. 그러나 절삭유 내에는 50~80% 정도의 미네랄 오일 외에 amins, carboxylates, chlorine, glycols와 같은 부식방지제, 안정제, 습윤제, 극압 첨가제 등 20여종 이상의 화학성분이 다량 함유되어 있으며, 인체에 지속적으로 노출 시 호흡기 자극, 천식, 폐렴, 피부염, 모낭염 및 피부암 등을 일으키게 된다. 또한 고농도의 유기성분이 함유되어 있으며 유기성분 외에도 금속가공유 내 함유된 암모니아성 질소는 수생태계에 방류되면 부영양화 및 녹조현상과 같은 문제를 일으키며, 수중에서 산화반응을 하여 아질산성 질소와 질산성 질소로 변화되면서 수계의 용존산소를 감소시켜 수계 내 오염을 일으켜 각별한 처리가 필요하다. 따라서 본 연구에서는 수용성 절삭유의 효율적인 처리를 위해 용성전극인 알루미늄과 SUS316전극을 이용하여 전극간격, 전압, NaCl 농도변화를 통해 암모니아성 질소 제거 효율에 미치는 영향을 검토하여, 전극 특성과 각 인자에 따른 제거양상을 비교하였다. 본 연구에서 사용한 시료는 수용성 절삭유 W1-1종을 초순수와 함께 5%(V/V) 희석하여 사용하였으며 성상은 Table 1과 같다. 장치구성은 반응조, 전극, 전원공급장치, 전압안정기(AVR)로 진행하였으며, 장치모식도는 다음 Fig. 1에 나타내었다.

An electrochemical treatment has great efficiency for the removal of non-biodegradable material and it has high applicability in wastewater treatment due to its short operating time. The purpose of this study using an electrochemical process is to provide fundamental data on the cutting fluid treatment, which has difficulties in the treatment of nonbiodegradable material. The results are as follows. Experimental data in relation to applied voltage and concentration of NaCl are outlined. With no addition of NaCl, and an applied voltage of 5 V, 10 V, or 15 V for 60 mins, the removal rates of CODMn were 29.87%, 55.32%, and 67.27% for each voltage. The removal rates of CODCr were 39.51%, 70.73%, and 85.37%, respectively. The removal rates of CODMn and CODCr increased with increasing applied voltage. These experimental results showed that the removal rate of COD with varying concentrations of NaCl (0 mM, 5 mM, 10 mM) increased increasing NaCl concentration.

Background : Chrysanthemum indicum L. is used in medicine, for bee, ornamental as multivoltinism plant resources. The purpose of this study was to evaluate methods of rooting promotion to make high quality medicinal plants, thereby increasing farm income. This study investigated the effects of different cuttage period, extraction site, shading degree, nursery tray for promoting cutting slips rooting in Chrysanthemum indicum L. Methods and Results : It is used New variety "Gamkuk 1" that were forstered in Gyeongsangnam-do Agricultural Research & Extension Services. Method of application with cuttage period were conducted under five condition; Around the middle of April, Toward the end of April, Early in May, Around the middle of May, Toward the end of May. Early in May plant length was longer than other cuttage period as 41.2%, 83.7% and are significant at significance level 0.05. Method of application with extraction site were conducted under three condition; 1 - 3 node, 4 - 6 node, 7 - 9 node. Leaf number in 1 - 3 node was more than other extration site as 19.4%, 33.6%. Also root length in 1 - 3 was more than other extration site as 10.5%, 23.2%. Method of application with shading degree were conducted under three condition; 50%, 70%, 90%. Plant length in 50 - 70% was longer than 90% shading degree as 23.8%, 24.2%. Also shading degree 50 - 70% had many root length and root number. Method of application with nursery tray were conducted under five condition; 72, 105, 128, 162, 200 tray. Plant length in 105, 128 tray was longer as 8.5 - 35.3% than other nursery tray and are significant at significance level 0.05. Conclusion : According to the results, Early in May, extraction site 1 - 3 node, shading degree 50 - 70%, nusery tray 105, 128 showed the highest growth on cutting slips root promotion in Chrysanthemum indicum L.

Background : This study was conducted to developed the propagation method by cutting for mass cultivation of Vitex roundifolia. We were pitched the cutting two times and treated plant growth regulators to enhance the rooting percentage. Vitex roundifolia is live in beach sandy soil south of Hwanghae-Do and Gangwon-Do. Vitex roundifolia have been used to bath foam. It is good for aromatic plant. It has 0.8% essential oil content in leaf and flower. Major components of essential oil were alpha-Pinene, Sabinene, beta-Pinen, 1,8-cineole, d-Limone. Despite the superior usability, it had not yet been made by the artificial cultivation Methods and Results : We were pitched the cutting of a first-year branch on June 5, which was greenwood cutting and July 17, which was semi-hardwood cutting at Kwangseung-ri beach, Gochanggun, Jeonbuk. The length of cutting was 10cm. It had 3～4 nodes, we stuck a cutting remain 2 nodes above ground on ordinary raise seedling soil. Rooting percentage was measured at 60 days after stuck a cutting. Rooting percentage was higher greenwoody cutting(95%) than semi-hardwood cutting(57.6%). In green wood cutting, there was no significance with plant growth, but chemical injury was occurred in IBA 5,000ppm. In semi-hardwood cutting, there was significance with plant growth regulators. The rooting percentages of all the treat were higher than control(no treatment). Rooting percentage was the highest in NAA 5,000ppm treated. Conclusion : Greenwood cutting method was more proper to propagation for Vitex roundifolia than semi-hardwood cutting. The optimum time to cutting for Vitex roundifolia propagation was the early in June. If miss a time to propagation Rooting percent was elevated by plant growth regulator.

Background : Platycodon grandiflorum radix used as a therapeutic agent for lung and respiratory diseases in traditional Korean medicine. The saponin and sugar content in P. grandiflorum root is dependent on the drying temperature and method. In this study, we investigated saponins and antioxidant contents in dried P. grandiflorum roots either not cut or cut to different lengths. Methods and Results : P. grandiflorum roots were either cut to 0.5, 1.0 or 2.0 ㎝ in length or left uncut. They were dried at 45℃ and the effect of antioxidant substances, antioxidant ability, and saponin content were investigated. P. grandiflorum roots rapidly dried out when cut to short lengths. The saponin contents (platycodin D, polygalacin D, and deapioplatycodin D) was highest in the uncut P. grandiflorum roots. When the cut lengths were long, the levels of polyphenolic compound increased. However, 2,2'-azinobis- 3-ethylbenzo-thiazoline-6-sulfonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities were higher in the samples cut to shorter lengths. Conclusions : These results suggested that the saponin and antioxidant content of P. grandiflorum roots could be maximized by controlling the drying rate of the roots via adjustments to the root cutting length.

The objective of this study was to establish the optical storage condition in cutting slips of Lycium chinense Mill. We investigated the different influential growth factor of this plant including two soil types (soil and vermiculite) and storage methods (gauze, parafilm, vinyl, and paper). Our result revealed that the formation of axillary bud was highest (4.8 ± 0.75 ea) from the cutting slips stored in vinyl and vermiculite treatment. Root length was long (2.8 ± 0.13 ea) in parafilm storage using soil. Maximum plant height was 135.33 ± 12.81㎝ with gauze storage using vermiculite. The number of leaves was maximum (130 ± 2.5 ea) at 90 days from the cutting slips of gauze storage using vermiculite. Highest number of fruit was harvested (149 ± 16.05 ea) from the cutting slips stored in parafilm and grown in vermiculite. It can be concluded that the storage treatment and soil type influence the affecting to general growth of Lycium chinense Mill.

본 연구는 제주특산식물인 좀향유의 현지 내･외 보존을 위한 기초 연구로서 증식체계를 마련하고 전처리제 처리에 따른 발 근 특성과 시비에 따른 유묘의 생장 효과를 등을 알아보았다. 온 실과 밀폐상의 온습도 조사결과 평균 온도는 비슷하였으나 공 중 습도는 온실보다 밀폐상이 높은 습도를 유지하였으며, 좀향 유 삽목 후 온실은 10일, 밀폐상은 7일만에 최초 발근을 확인하 여 밀폐상의 빠른 발근율을 보였으며 온실과 밀폐상에서의 생 존율, 발근율, 뿌리수 등은 근소하게 밀폐상이 높게 조사되어 온실보다 밀폐상이 효과적이었다. 발근억제물질 제거를 위한 전 처리제 처리는 AgNO3 77.5%를 제외한 다른 처리구에서 95% 이 상의 높은 발근율로 조사되어 좀향유의 경우 발근억제 물질은 적은 것으로 판단된다. 유묘의 용기별 질소 시비량 및 Osmocote 시비시험 결과 시비량과 용기의 조건에 따라 생존율과 생장 등 에 차이를 보였다. 배양판에서 완효성 비료인 Osmocote를 시비 한 결과 생존율, 지상부, 지하부 생장 등이 가장 양호하여 좀향 유의 유묘 증식을 위해서는 Osmocote 시비가 바람직 할 것으로 판단된다.

신선편이용 절단배추의 선도유지 및 갈변 방지 목적으로 질소 치환 및 세라믹 칼날에 의한 절단 효과를 조사하였다. 저장 5일 이후부터 대조구에 비하여 NC 처리구의 중량변화 와 갈변도가 적게 나타났다. 질소 치환과 세라믹 칼날의 사용에 의한 절단 공정의 개선이 절단채소의 선도 유지와 갈변 방지에 효과가 있을 것으로 생각된다.

클레마티스의 번식은 종자 및 삽목번식으로 하는데, 삽목 성공 률이 낮아 번식에 어려움이 있다. 이에 효과적인 번식법으로 삽목 번식 방법을 구명하고자 클레마티스 삽수를 채취하여 유리온실에 서 본 실험을 수행하였다. 삽수길이는 1마디와 2마디 길이로 하였 으며, 배지는 단용배지로 피트모스, 펄라이트, 버미큘라이트, 발근 제는 IBA 4000mg·L-1 3초 침지, IBA 500mg·L-1 30분 침지와 루 톤을 처리하였다. 클레마티스의 발근기간은 약 10주가 소요되었 다. 클레마티스의 삽수 마디길이를 2마디보다 1마디로 하였을 경 우 발근율이 약 43% 증가하였다. 1마디 삽수의 경우 발근제 루톤 분의 처리 시 발근율은 대조구보다 약 7% 더 향상되었다. 따라서, 삽수 양이나 삽목 후 관리를 고려할 때, 1마디 삽수를 이용하는 것 이 효과적인 것으로 보인다. 배지와 발근제에 따른 발근율은 버미 큘라이트와 IBA 4,000mg·L-1 처리에서 96%로 가장 높았으며, 뿌 리수와 뿌리 길이도 IBA 4,000mg·L-1 및 루톤 처리에서 우수하였 다. 즉, 1마디 삽수를 버미큘라이트 배지에 삽목한 경우 발근율은 평균 약 80-83%로 피트모스와 펄라이트보다 약 25-29%, 13-39% 더 높았으며, 버미큘라이트 배지에 IBA 4,000mg·L-1 침지처리 시 발근율이 89-96%로 9-13%가 더 증가되어 가장 효과적이었다

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching 5.2℃ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than 35℃ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than 1,600 μmol m-2 s-1 at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.