A typical trade-off relationship exists between strength and elongation in face-centered cubic metals. Studies have recently been conducted to enhance strength without ductility reduction through surface-treatment-based ultrasonic nanocrystalline surface modification (UNSM), which creates a gradient microstructure in which grains become smaller from the inside to the surface. The transformation-induced plasticity effect in Fe-Mn alloys results in excellent strength and ductility due to their high work-hardening rate. This rate is achieved through strain-induced martensitic transformation when an alloy is plastically deformed. In this study, Fe-6%Mn powders with different sizes were prepared by high-energy ball milling and sintered through spark plasma sintering to produce Fe-6%Mn samples. A gradient microstructure was obtained by stacking the different-sized powders to achieve similar effects as those derived from UNSM. A compressive test was performed to investigate the mechanical properties, including the yielding behavior. The deformed microstructure was observed through electron backscatter diffraction to determine the effects of gradient plastic deformation.

AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a highquality additive manufacturing product.

Coffee is the most popular beverage in the world and various pollutants, including volatile organic compounds (VOCs), are emitted from the coffee manufacturing workplace (roasting process). In this study, we analyzed the characteristics of VOCs emissions from roasted Arabica coffee bean powder using a VOCs emission chamber with a PTR-ToF-MS. The emission test was maintained under constant temperature (20 ± 2oC) and humidity (50 ± 5%) conditions. As a result of the emission test, most of the target compounds had a high concentration in the initial period, and decreased emissions as time lapsed. Acetaldehyde showed the highest concentration and was initially 78 ppm during the test period. Acetaldehyde was followed by propionic acid at 61 ppm, propanal at 51 ppm, and isobutanal at 50 ppm. As a result of comparing the occupational exposure limits (OELs) of individual VOC emitted during the coffee roasting process, the OELs of four substances, including acetaldehyde, propionic acid, acetic acid, and pyridine were identified. Of all four substances, only pyridine exceeded the OELs, and the other compounds had levels of 10% to 30% of the OELs.

The purpose of this study was to investigate the possibility of using air potato (Dioscorea bulbifera) powder to make sponge cakes. The sponge cake batter was made by adding 0, 10, 20, 30, and 40% of air potato powder, and the resultant anti-oxidative properties and quality characteristics were analyzed. The study showed that the height, batter yield, and loss rate of sponge cakes decreased as increasing amounts of air potato powder were added, but the weight, viscosity, moisture content, and specific gravity increased. An evaluation of the color showed that the L and b values were highest in the control group but the a value was highest in the 40% group. There was no significant difference between samples in terms of cohesiveness, although the study showed a significant increase in the hardness, chewiness, and gumminess as the quantity of air potato powder in the sponge cakes increased. The total polyphenol content and DPPH radical scavenging activity increased noticeably as more air potato powder was added to the sponge cakes. The results thus showed that the study groups with the addition of air potato powder showed higher antioxidant activity than the control group.

Beta-titanium alloys are used in many industries due to their increased elongation resulting from their BCC structure and low modulus of elasticity. However, there are many limitations to their use due to the high cost of betastabilizer elements. In this study, biocompatible Ti-Mo-Fe beta titanium alloys are designed by replacing costly betastabilizer elements (e.g., Nb, Zr, or Ta) with inexpensive Mo and Fe elements. Additionally, Ti-Mo-Fe alloys designed with different Fe contents are fabricated using powder metallurgy. Fe is a strong, biocompatible beta-stabilizer element and a low-cost alloying element. The mechanical properties of the Ti-Mo-Fe metastable beta titanium alloys are analyzed in relation to the microstructural changes. When the Fe content increases, the tensile strength and elongation decrease due to brittle fracture despite a decreasing pore fraction. It is confirmed that the hardness and tensile strength of Ti-5Mo-2Fe P/M improve to more than 360 Hv and 900 MPa, respectively.

This study compares the characteristics of a compact TiO2 (c-TiO2) powdery film, which is used as the electron transport layer (ETL) of perovskite solar cells, based on the manufacturing method. Additionally, its efficiency is measured by applying it to a carbon electrode solar cell. Spin-coating and spray methods are compared, and spraybased c-TiO2 exhibits superior optical properties. Furthermore, surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) exhibits the excellent surface properties of spray-based TiO2. The photoelectric conversion efficiency (PCE) is 14.31% when applied to planar perovskite solar cells based on metal electrodes. Finally, carbon nanotube (CNT) film electrode-based solar cells exhibits a 76% PCE compared with that of metal electrodebased solar cells, providing the possibility of commercialization.

An increasing trend embracing the 2030 generation mindset through the new word ‘newtro’, which means reinterpreting the past and selling it in the present, has been gaining traction. The 2030 generation who seek new experiences and desserts is growing. The unique dessert market is expected to continue to grow in the future. Thus, this study devised a pine needle madeleine. Madeleines were made by varying the proportions of pine needle powder added to 0%, 1%, 3%, 5%, and 7%, and specific gravity, moisture, color, physical properties, and antioxidant properties were measured. The L-value decreased significantly (p<0.001) as the amount of pine needle powder added increased, and the a-value increased (p<0.001). The total polyphenol content, DPPH, and ABTS gradually increased significantly (p<0.001). Through this study, it was possible to confirm the quality and characteristics of madeleines using pine needle powder, which has excellent antioxidant properties, and it will become basic data for the development of various desserts using pine needle powder.

본 연구는 발효노니 다당체 추출물(Vitalbos)을 건강기능 식품 소재로 활용하기 위해 DAA, 총당 함량, 단당류 3종 (galacturonic acid, glucose 및 galactose)을 지표성분으로 설정하고, 지표성분에 대한 효과적인 분석법 설정 및 검 증을 위해 수행되었다. 기존에 보고된 분석법 검증 방법 을 수정하여 특이성, 직선성, 정밀성, 정확성, 검출한계 (LOD) 및 정량한계(LOQ)를 고성능 액체크로마토그래피와 페놀-황산법을 이용하여 측정하였다. 그 결과 DAA 및 단 당류 3종의 표준용액과 Vitalbos의 머무름 시간이 일치하 였으며 스펙트럼 또한 동일하여 분석법의 특이성을 확인 하였다. 지표성분의 검량선 상관계수(R2)는 0.9995-0.9998 범위로 0.99 이상의 우수한 직선성을 나타냈다. Intra-day 및 inter-day 정밀도는 0.14-3.01%의 범위로 5% 미만의 우 수한 정밀도를 나타냈고 회수율은 95.13-105.59% 범위에 서 우수한 정확도를 보였다. DAA 분석의 LOD와 LOQ는 각각 0.39 μg/mL 및 1.18 μg/mL이었으며 총당 함량의 LOD 및 LOQ는 각각 0.84 μg/mL 및 2.55 μg/mL로 측정 되었다. 단당류 3종에 대한 LOD는 0.48-0.81 μg/mL의 범 위였으며, LOQ는 1.45-2.44 μg/mL 범위에서 정량분석이 가능한 것으로 나타났다. 분석법 검증 결과, 특이성, 직선 성, 정밀성 및 정확성 모두 우수한 분석법임을 검증하였 으며, LOD와 LOQ 또한 Vitalbos 분석에 적합하였음을 확 인하였다. 검증된 분석법을 이용하여 Vitalbos의 지표 성분 함량을 측정하였을 때, DAA, 총당 함량, galacturonic acid, glucose 및 galactose의 함량은 각각 2.31±0.06 mg/dry weight g, 475.92±5.95 mg/dry weight g, 72.83±1.05 mg/dry weight g, 71.63±2.44 mg/dry weight g 및 67.30±2.31 mg/dry weight g으로 측정되었다. 본 연구에서 검증된 분석법을 사용했을 때 Vitalbos의 지표성분 3종에 대하여 우수한 재현성으로 정 량분석이 가능하였으며, 건강기능식품 소재로의 품질관리에 기여할 수 있을 것으로 판단된다.

This study examined the antioxidant activity and quality of Jeung-pyun prepared with different concentrations of hardy kiwi powder at 0%, 2.5%, 5%, 7.5%, and 10%. When the moisture content of Jeung-pyun was between 49.94-53.33%, the pH measurement showed a significant decrease with the increase of the hardy kiwi powder from 3.95 to 4.82. The L (lightness) values and the (redness) values decreased, whereas the b (yellowness) values increased with increasing amounts of hardy kiwi powder. The study showed a significant decrease in hardness, chewiness, and gumminess as the proportion of hardy kiwi powder in the Jeung-pyun increased. The total polyphenol content and DPPH radical scavenging activity increased noticeably as more hardy kiwi powder was added to the Jeung-pyun. As a result, the study groups with added hardy kiwi powder showed higher antioxidant activity than the control groups. Based on the results, this study recommends hardy kiwi as a good ingredient for enhancing the functionality of Jeung-pyun.

This study investigated the quality characteristics of emulsion-type chicken breast sausages containing black soldier fly larvae (BSFL) powder. The chicken breast and BSFL powder were added at various mixing ratios (C:chicken breast 56% and BSFL powder 0%, 1%:chicken breast 55% and BSFL powder 1%, 2%:chicken breast 54% and BSFL powder 2%, 3%:chicken breast 53% and BSFL powder 3%). The pH, moisture content, and water holding capacity of the sausages increased with the powder amount. In the instrumental color evaluation, the L* and b* values were significantly different among the samples (p<0.05). However, there was no significant difference in a* value (P>0.05) with the amount of powder added. Volatile basic nitrogen and acid value tended to increase with the amount of BSFL powder. The total phenolic content tended to increase, but the value of IC50 according to DPPH radical scavenging decreased as the amount of powder increased. This study concluded that BSFL powder can be used in meat products processing as a substitute for meat protein and may also improve antioxidant activity.

본 연구는 비산소 분쇄 및 포장이 해조류 분말의 색도, 항산화활성 및 미생물 수에 미치는 영향을 조사하였다. 대조구로는 산소 조건하에서 분쇄 및 포장을 진행하였다. 색도는 대조구가 저장기간이 지남에 따라 L값과 b값은 감소하고 a값이 증가하여 갈변현상이 일어나는 것을 확인하였다. 또한, 총 페놀함량 (9.8~8.0mg GAE/100g dw), DPPH (12.57~11.00mg BHAE/100g dw), ABTS (13~8.4mg AAE/100g dw) 및 FRAP (11.2~8.0mg Fe(II)/100g dw)활성이 모두 감소하는 것으로 나타났다. 반면에, 진공-질소치환에 의한 비산소 분쇄 및 포장의 경우 유의적으로 차이가 없는 것으로 나타났다. 미생물수는 대장균군, 일반세균수, 효모 및 곰팡이를 분석하였고 대장균군과 곰팡이는 모든 샘플에서 불검출되었다. 대조구는 0~8주차에서 일반세균수와 효모가 각각 1.52~1.96 log CFU/g, 0~1.77 log CFU/g으로 증가하는 것으로 나타났다. 비산소 분쇄 및 포장 조건은 0~8주차에서 일반세균수와 효모가 각각 1.52~1.53 log CFU/g, 0~1.25 log CFU/g으로 각각 나타나 일반세균수는 유의적으로 차이가 없었으나 효모는 약간 증가한 것으로 나타났다. 따라서, 색도유지, 높은 총 페놀함량 및 항산화 활성 유지, 일반세균 및 효모의 성장 억제를 위해서는 진공-질소치환에 의한 비산소 분쇄 및 포장 조건하에서 품질특성과 미생물수를 유지하는데 효과적일 것으로 판단된다.

국내 음식부산물 발생량은 연간 약 500만톤으로 그 중 70 %가량은 퇴비화 또는 사료화로 자원화되고 있다. 최근 비료공정규격상 음식부산물 건조분말(DFP)이 혼합유기질비료 및 유기복합비료의 원료로 사용할 수 있게 되었지만 아직 적정사용기준에 대한 설정이 미흡한 상태이다. 이에 본 연구는 수집 시기별 음식부산물 건조분말의 화학적 특성을 평가하고 음식부산물 건조분말이 혼합된 혼합유기질비료의 사용량에 따른 작물 및 토양화학성 변화에 대해 평가하고자 하였다. 처리구는 무처리(NF), 무기질비료처리구(NPK, N-P2O5-K2O=32-7.8-19.8 kg 10a-1), 음식부산물 건조분말 단독처리구(DFP), 시판혼합유기질비료(MOF), 음식부산물 건조분말 혼합유기질비료 처리구(DFPMOF)이며 DFPMOF 처리구는 100, 200, 400 및 600%로 구분하여 설정하였다. DFP, MOF 및 DFPMOF 처리구는 질소비료 사용량을 기준으로 하여 비료처리를 하여 작물 재배실험을 진행하였다. 음식부산물의 화학적 특성은 시기별에 따라서 유의적인 차이가 없었으며 중금속 함량 또한 기준에 적합한 수준이었다. 배추 생산량은 DFPMOF 처리구가 6,280 kg 10a-1로 NPK처리구(7,000 g kg-1)와 가장 유사하였으며 질소이용효율 또한 유사한 경향이었다. 토양 pH는 DFPMOF 사용량이 증가함에 따라 감소하는 경향이었으며, EC, OM 및 Ex. K는 DFPMOF 사용량이 증가함에 따라 감소하는 경향이었다. 이를 통해 DFPMOF 는 질소비료사용량 기준으로 처리하였을 때 가장 적합할것으로 판단되나, 적정사용기준을 설정하기 위해서는 장기간 연용시험을 통한 환경영향평가가 필요할 것으로 사료된다.

This study demonstrates the effect of the compaction pressure on the microstructure and properties of pressureless-sintered W bodies. W powders are synthesized by ultrasonic spray pyrolysis and hydrogen reduction using ammonium metatungstate hydrate as a precursor. Microstructural investigation reveals that a spherical powder in the form of agglomerated nanosized W particles is successfully synthesized. The W powder synthesized by ultrasonic spray pyrolysis exhibits a relative density of approximately 94% regardless of the compaction pressure, whereas the commercial powder exhibits a relative density of 64% under the same sintering conditions. This change in the relative density of the sintered compact can be explained by the difference in the sizes of the raw powder and the densities of the compacted green body. The grain size increases as the compaction pressure increases, and the sintered compact uniaxially pressed to 50 MPa and then isostatically pressed to 300 MPa exhibits a size of 0.71 m. The Vickers hardness of the sintered W exhibits a high value of 4.7 GPa, mainly due to grain refinement.

The purpose of this study was to examine the quality characteristics of cookies made with Angelica gigas Nakai fermented by Lactobacillus paracasei. As the content of Angelica gigas Nakai fermented by L. paracasei (AFL) powder increased, the pH of the cookies decreased from 6.3 to 5.2. There was no significant difference in the moisture content depending on AFL powder content. The content of reducing sugar also increased with increasing AFL powder content. Regarding the surface color of the cookies, the L- and b-values decreased with increasing AFL powder content, whereas the a-value increased. As the AFL powder content increased, the total polyphenol content and ABTS and DPPH radical scavenging activities significantly increased. Cookies with 8% AFL powder (AC8) had the highest levels of 107.16 mg%, 38.69%, and 65.56%, respectively. The texture, adhesiveness, and cohesiveness of the cookies with various AFL powder levels were not significantly different, and hardness, springiness, gumminess, and chewiness showed no tendencies toward changes. Taken together, these results showed that when AFL powder was added to cookies, bioactivities such as antioxidant activity increased, making AFL powder a good material with high potential for use in commercially baked products.

This study investigates the interfacial reaction between powder-metallurgy high-entropy alloys (HEAs) and cast aluminum. HEA pellets are produced by the spark plasma sintering of Al0.5CoCrCu0.5FeNi HEA powder. These sintered pellets are then placed in molten Al, and the phases formed at the interface between the HEA pellets and cast Al are analyzed. First, Kirkendall voids are observed due to the difference in the diffusion rates between the liquid Al and solid HEA phases. In addition, although Co, Fe, and Ni atoms, which have low mixing enthalpies with Al, diffuse toward Al, Cu atoms, which have a high mixing enthalpy with Al, tend to form Al–Cu intermetallic compounds. These results provide guidelines for designing Al matrix composites containing high-entropy phases.

This study was performed to evaluate the quality characteristics and antioxidant activity of Nurungji by varying the purple sweet potato powder addition time (AR: added after rice cooking, BR: added before rice cooking) and powder ratio (0, 2, 4, 6, 8%) on the prepared rice during Nurungji’s manufacturing. In both AR and BR samples, water binding capacity, soluble solid content, reducing sugar, and hardness increased with an increasing proportion of purple sweet potato powder; however, the pH and moisture content decreased. The L value and b value decreased and increased with the influence of anthocyanin in purple sweet potato powder. The total polyphenol, flavonoid, anthocyanin contents, DPPH, and ABTS radical scavenging activity were highest in Nurungji with 8% of purple sweet potato powder. Moreover, AR samples showed higher antioxidant activity than BR samples. Based on the study results above, the preparation of Nurungji with 8% purple sweet potato powder by AR process was more favorable based on the content of antioxidants and antioxidant activity.

This study evaluate the antioxidant activity and quality characteristics of muffins prepared with the addition of Cirsium nipponicum powder in the ratio of 0, 2, 4, 6, and 8% and confirm the possibility of using Cirsium nipponicum as a functional food. As the proportion of Cirsium nipponicum powder increased, the specific gravity of the muffins increased while their height, specific volume, moisture content and pH decreased. The baking loss rate of the samples prepared with the addition of Cirsium nipponicum powder was higher than in the control group. The ‘L’ and ‘b’ values decreased with the increase in the Cirsium nipponicum powder content, while the ‘a’ value increased. The evaluation of texture showed that hardness, chewiness, and gumminess increased with an increase in the Cirsium nipponicum powder content. As per the results of the consumer acceptability test, the 4-6% Cirsium nipponicum powder group showed higher scores than the other groups in the characteristics of color, flavor, taste, and texture, and the 4% group secured the highest score for overall acceptance. Also, with the increasing addition of Cirsium nipponicum powder, the antioxidant activity levels increased, as indicated by the total phenolic content, DPPH, and ABTS radical scavenging activities and reducing power. Based on these study results, muffins prepared with the addition of 4% of Cirsium nipponicum powder showed the best functional and sensory qualities.

The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.

Powder flowability is critical in additive manufacturing processes, especially for laser powder bed fusion. Many powder features, such as powder size distribution, particle shape, surface roughness, and chemical composition, simultaneously affect the flow properties of a powder; however, the individual effect of each factor on powder flowability has not been comprehensively evaluated. In this study, the impact of particle shape (sphericity) on the rheological properties of Ti-6Al-4V powder is quantified using an FT4 powder rheometer. Dynamic image analysis is conducted on plasma-atomized (PA) and gas-atomized (GA) powders to evaluate their particle sphericity. PA and GA powders exhibit negligible differences in compressibility and permeability tests, but GA powder shows more cohesive behavior, especially in a dynamic state, because lower particle sphericity facilitates interaction between particles during the powder flow. These results provide guidelines for the manufacturing of advanced metal powders with excellent powder flowability for laser powder bed fusion.