간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제21권 제2호 (2019년 4월) 30건
학술연구
21.
2019.04
구독 인증기관 무료, 개인회원 유료
In this study, the yaw misalignment value of wind turbine was measured using Lidar and it was analyzed the effect of vibration reduction and power performance improvement when applied to turbine. It was confirmed that the vibration of the main bearing and the gear box of the wind turbine was partially reduced. Also it was found that the output performance was improved when the wind speed was over 8m/s. As a result, it was also found that the annual energy production(AEP) was improved when the average annual wind speed of the wind farm was over 6m/s. Converted to AEP, the AEP improved about 1% and 4%, when the annual wind speed was 6m/s and 11m/s respectively, which resulted in an improvement of about 1~4% through the yaw misalignment correction of the wind turbine.
4,000원
22.
2019.04
구독 인증기관 무료, 개인회원 유료
The object of this paper is to estimation of noise reduction effect of road noise by operating condition due to tire noise regulation. A prepare the countermeasure of the noise reduction according to collect tire/road noise data under various influencing factors by using the tire test method. To accomplish the object : A automotive is used as a test platform to test tire/road noise by changing different types of tires and using the On-Board Sound Intensity test system. The influence of inflation pressure, road, load, speed and pattern type on tire/road noise is compared and analyzed. At the same time, the mechanism of tire/road noise is analyzed, which provides an experimental basis for tire noise reduction.
4,000원
23.
2019.04
구독 인증기관 무료, 개인회원 유료
In advanced countries, various policies are being enforced to reduce equipment noise level at it’s source. This paper analyses the problems of domestic noise policies related to noisy equipment, and presents a plan for improving the implementation of expansion policy of low noise equipment based on this analysis. This paper proposes that the equipment satisfying the compulsory rule be able to use the environmental certification mark, the standards of which are defined in recommended rules, to improve the linkage between the two policy measures. This paper also suggests expanding the range of equipment to be supervised and using new noise label that has grades and shows detailed noise level of the equipment to improve environmental certification system. In addition, supplementing the construction permission system and supporting international certification system are offered to expand the use of low noise equipment.
4,000원
24.
2019.04
구독 인증기관 무료, 개인회원 유료
The spray characteristics of two working fluids operating with a bi-fuel injector were investigated. A bi-fuel injector simultaneously sprays two working fluids, both of which possess different properties. An effervescent atomizer containing two separated aerator tubes was employed as the bi-fuel injector. Vegetable oil and kerosene were the working fluids. The mixing ratio and ALR were the experimental parameters. The mixing ratio is the mass fraction of vegetable oil in the total amount of working fluids. The ALR represents the ratio of the atomizing gas to the working fluid mass flow ratio. In order to examine spray characteristics, the spray angle, droplet size distribution, cumulative volume fraction, Sauter Mean Diameter and span factor were measured using a high resolution video camera and a Laser Diffraction Particle Analyzer. From the experimental results, spray angle is decreased with as the ratio of kerosene to vegetable oil in working fluid is increased. Regardless of ALR, SMD was the smallest when the only working fluid was kerosene and uniformity was the most stable when the only working fluid was vegetable oil.
4,000원
25.
2019.04
구독 인증기관 무료, 개인회원 유료
The fuel used in this study, DMM is an oxygen additive containing 42.5% oxygen by weight and dissolved in diesel fuel, also known as methyl alcohol or Dimethoxymethane (CH3-O-CH2-O-CH3). DMM, which is a colorless liquid, shows chemical characteristics of gas-liquid and is also used as a diesel fuel component. In this study, five mixtures were added to the common diesel fuel at DMM addition rates of 2.5, 5, 7.5, 10 and 12.5% by volume. A single cylinder, four strokes, DI diesel engine was used as the test engine. Experimental data were also collected at 24 engine speed-load conditions operating in steady state. The purpose of this experiment was to study the effect of the addition ratio of oxidized fuel mixed in diesel fuel on engine power and exhaust performance. When compared with the common diesel fuel, the exhaust of Smoke was substantially reduced in all DMM mixing ratios. These results indicate that DMM can be an effective blend of diesel fuel and is an environmentally friendly alternative fuel. This study also shows that smoke and NOx emissions can be reduced at the same time through the application of oxygen fuel and EGR.
4,000원
26.
2019.04
구독 인증기관 무료, 개인회원 유료
Noises in each construction field cause residents in the neighborhood to make complaints due to their high sound pressure level and repetitive, shocking sound. While South Korea regulates construction noises on the basis of legal criteria to minimize the damage from the noises, the regulation only involves a weighted sound level (dB(A)), which is loudness, like other types of noises. It is therefore necessary to make typology of construction noise sources and evaluation vocabularies with the objective of making criteria for regulating construction noises suitable for the South Korean situation. While research based on a survey has been conducted to make typology of construction noise sources and evaluation vocabularies, there have been lots of difficulties in using it to make criteria for regulation because no consideration was given to psychological responses of people. On the basis of the findings from literature review, this study aimed to make typology of construction noise sources and vocabularies through a psycho-acoustic experiment and analyze the psychological characteristics and meanings of construction noises more accurately. The respondents’ psychological responses to construction noise sources were grouped into three factors ‘normal, shocking, and fluctuating noises’ and into ― ― six factors ‘annoying,’ ‘loud,’ ‘confusing,’ ‘noisy,’ ‘alarming,’ and ‘boisterous’ in terms of evaluation ― ― vocabularies. Since the factor with the biggest eigenvalue drawn from the respondents’ psychological responses is most important, the most important influential factor in evaluating construction noises was ‘normal noises’ for construction noise sources and ‘annoyance’ for evaluation vocabularies. This typology is expected to be useful to make and revise criteria for regulating construction noises.
4,000원
생산기술
27.
2019.04
구독 인증기관 무료, 개인회원 유료
This study analyzes the certification system and international standard trend for cold storage and proposes evaluation method for the development of KS in accordance with international standards so that high quality products can be supplied to consumers. The international standard for cold storage can be divided into three categories: refrigerator unit, refrigerator warehouse, and cold chain. Each similar standard was analyzed and studied. Among them, AHRI's international standard is the most advanced standard, so test methods and conditions are matched. Finally, the performance evaluation technology and the performance evaluation technology for the refrigerator unit suitable for the domestic situation using the analyzed method were proposed.
4,000원
28.
2019.04
구독 인증기관 무료, 개인회원 유료
In this theoretical study, a design and performance analysis theory of a micro flowrate and high pressure air-compressor is developed. The governing equations are from the gas state equation and fluid dynamic theories because the working fluid in the air compressor is in a gas phase. A case study was conducted to design a reciprocating type of air compressor which the target performance was 0.6liter/min in the volume flowrate with 5atg in air pressure at 1,600rpm rotational speed. Geometrical size of the model air compressor designed is 10mm in stroke, 20mm in bore with 4.79 compression ratio. From the performance analysis of the model compressor, it was found that the air volume flowrate produced was 0.6liter/min with 5.81atg in pressure. The design theory of a micro-size high-pressure air compressor developed in this study is expected to be very useful design tools in NANO technology industry.
4,000원
29.
2019.04
구독 인증기관 무료, 개인회원 유료
In this technology development, we have developed an automation system after developing a material rotation mixing process so that the manual process of sound absorbing materials can be supplied in quantities. After setting up 5kgf supply of the fused acoustic material, the setting value of 5kg was automatically supplied to the molded frame to reach the quantification supply. In the process of producing noise goods between floors, the automatic compression system was developed, which was a manual operation of three persons, and the production of one person was allowed, and the production of 200 sound absorbers per day, It has improved to 450. Quantitative supply unit was developed to reach 50.7mm for target 50±3mm based on the sound absorption product thickness indication, reducing the defect rate to less.
4,000원
30.
2019.04
구독 인증기관 무료, 개인회원 유료
In this work, a PAM(Plasma Assisted Machining) technology was applied to milling of high manganese steel, a typical hard-to-machine materials. For this purpose, a transferred type of arc plasma torch was coupled with a 3-axis milling machine, then, used to heat and soften the surface of a high manganese steel plate in front of a 16 mm end mill with 2 blades and hard coatings. From the test results, it was concluded that the cutting load can be significantly reduced down to 57 % by plasma heating with the power level of 3.9 kW, ensuring the improvement of tool life and surface roughness in milling of high manganese work pieces.
4,000원
1
2
