A QM-ISP-4 Planetary Mill was employed to activate mechanically the mixtures of anatase and corundum at room temperature for different times. The milled powder mixtures were then sintered at for 1 h. The XRD results showed that the milled powder mixtures were completely transformed into after sintering, except the mixtures milled for 5 and 10 hours. The SEM observations showed the typical morphology of rod-like vary in the range: widths from 0.6 to , and lengths from 3.0 to . The rod-like formation was attributed to the positive effects caused by the mechanical activation.

Tin oxide nanoparticles (n-SnO and ) were synthesized by the inert gas condensation (IGC) method under dynamic gas flow of oxygen and argon at various conditions. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) method were used to analysis the size, shape and crystal structure of the produced powders. The synthesized particles were mostly amorphous and their size increased with increasing the partial pressure of oxygen in the processing chamber. The particles also became broader in size when higher oxygen pressures were applied. Low temperature annealing at in air resulted to crystallization of the amorphous n-SnO particles to .

Processing techniques for producing microcellular silicon carbide, mullite, and cordierite ceramics have been developed by a reaction method that incorporates a polysiloxane and reactive fillers. The techniques developed in this study offer substantial flexibility for producing microcellular ceramics whereby cell size, cell density, degree of interconnectivity, composition, and porosity can all be effectively controlled. It is demonstrated that the adjustment of filler composition enables the possibility of tailoring the composition and properties of the microcellular ceramics. The present results suggest that the proposed novel processing techniques are suitable for the manufacture of microcellular ceramics with high morphological uniformity.

Metallic foams have a combination of attractive properties such as high specific mechanical properties and good energy absorption characteristics. This paper presents the properties of steel foam sandwiches produced using powder metallurgy approach. Metallic powder, solid polymeric binder and a foaming agent are dry-mixed and molded into the desired shape. The molded powder mix is then heat-treated to foam, debind and sinter the material. The resulting material has an open cell structure with high porosity. The structure and properties of sandwiches specimens produced with the process are presented and discussed.

Processing of W-Cu graded materials from attritor-milled W-CuO mixtures is described. The powder reduction steps are investigated by TG and XRD analyses and by microstructural observations (SEM, TEM). Sintering of reduced powder with different compositions is analysed by dilatometry. Sintering behaviour of the graded component processed by co-compaction of a 10/20/30wt%Cu multi-layer material is briefly discussed. Liquid Cu migration is observed and smooths the composition gradient. Perspectives to control this migration are discussed.

Oridinal thermal spray process has developed into two ways, namely, temperature dominated represented by plasma spraying, and velocity dominated represented by HVOF. It is common for both that the particle materials sprayed are basically in melted or half melted condition. New process has developed recently, that is, Cold Spray and Aerosol Deposition. Particle's heating is limited in CS lower than half of the material's melting point. Moreover, exactly no heating is loaded in AD process. Through the investigation on common feature for these three spraying processes, potential of new material process - Particle Deposition, PD - is considered and proposed

The development of Micro MIM as a new manufacturing process for metallic micro parts made of advanced functional materials has been the subject of considerable research over the last years. This paper addresses important quality aspects on processing of new materials by Micro-MIM. Three examples of new functional materials that can be processed are reviewed in this paper. The first example is two-component-Micro-MIM to obtain multi-functional devices. A micro positioning encoder consisting of a magnetic / non-magnetic material combination is presented. The second issue is series production of the replicate of the smallest human bone in the ear (stapes) from Titanium as an example of medical application. Quality assurance and reproducibility in terms of injection moulding parameters are addressed. In the third part, first results on the processing of the shape memory alloy NiTi by Micro-MIM are presented. Potential applications include biocompatible devices and transportation, for example automotive and aerospace. Processing routes and initial microstructures obtained are discussed.

We developed a data reduction program (RX) to process BOES data automatically. It processes a whole set of data taken during one night automatically - preprocessing, extraction to one-dimensional spectra and wavelength calibration. The execution is very fast and the performance looks pretty good. We described the performance of this program, comparing its procedure with that of IRAF. RX does not have functions for continuum normalization yet. We will develop those functions in the next works.

To elucidate the effect of feeding differently prepared CaCO3 (industrially purified limestone) on laying performance, egg shell quality and serum calcium and phosphorus concentration, totally 288 layers (52 wks old), with 16 birds per replicate, 3 replicates per treatment for six treatments were employed into the series of CaCO3 treatments followed by feeding study. Six CaCO3 treatment and diet preparation includes mash diet with naturally sized CaCO3 (MNaC), mash diet with coarsely particled CaCO3 (MCoC), mash diet with finely particled CaCO3 (MFiC), pelleted diet with naturally sized CaCO3 (PNaC), pelleted diet with casein coated CaCO3 (PCnC) and pelleted diet with agar coated CaCO3 (PAgC). Hen day egg production of the bird fed both fine CaCO3 and pelleted CaCO3 were lower (p<0.05) than those fed other CaCO3 diets. Although there is no difference in average egg weight among treatments, the weight tended to be heavier once the egg production rate was low. There is no difference in feed conversion ratio (intake/egg) among treatments. Egg shell thickness was the highest (p<0.05) with feeding of MCoC whereas the value was the lowest with feeding of pelleted CaCO3 diet. Although there is some difference in egg shell thickness, the shell breaking forces were not significantly different among treatments. Calcium content of the shell was the lowest (p<0.05) in the egg from the layer fed finely particled CaCO3. Serum Ca content tended to decrease up to 8 hrs after feeding, then tended to increase afterwards. Although both agar and casein coating of CaCO3 tended to retard the recovering increase of blood Ca, the difference needed to be clarified with individual ovulation cycle. Serum P level was generally decreased as time passed after feeding. Crude protein utilizability was the highest with feeding of agar coated CaCO3 and that of fat was higher with hens fed pelleted diets. Both ash and P utilizabilities of diet with finely particled CaCO3 were the highest among treatment although there were no differences in both energy and Ca utilizabilities. Conclusively, both the particle size of CaCO3 and pelleting of CaCO3 diet could affect shell quality of the egg. The effect was more evident by the differentiation of CaCO3 particle size than any other processing such as pelleting and coating.