본 시험은 제주지역에서 재식밀도(3030cm, 3025cm, 3020cm, 3015cm, 3010cm)에 따른 제주재래 대두의 생육형질, 수량성 및 사료가치를 검토하고 가축조사료로 이용하기 위하여 2002년 5월 11일부터 9월 10일까지 수행하였던 결과는 다음과 같다. 개화기까지의 일수는 밀식함에 따라 94일에서 98일로 지연되었다. 초장은 3030cm 재식구에서 103cm로 작은 편이었으나 밀식할수록 점차적으로 커져서 3010cm 재식구에서 초장은

머스크멜론의 담액재배시 착과절위 및 적심절위와 재식밀도를 구명하기 위하여 착과절위는 7~8, 11~12, 또는 15~16절, 적심절위는 22 또는 27절, 재식밀도는 100cm×25cm 100cm×35cm, 100cm×45cm 및 100cm×55cm로 달리하였다. 과실품질은 동일한 착과절위일때 22절 적심구보다 27절 적심구에서 과중이 무겁고 당도가 높았다. 동일한 적심절위일때 착과절위가 높을수록 과중은 무겁고 당도는 낮았다. 100cm×25cm 또는 100cm×35cm 재식구보다 10cm×45cm 또는 100cm×55cm 재식구에서 과중이 더 크고 당도가 높았다. 총과실수량은 재식밀도가 낮아질수록 적었으나 상품과율은 반대로 높아서 상품과의 수량은 100cm×45cm 재식구에서 가장 높았으며 100cm×25cm, 100cm×35cm, 100cm×55cm 순으로 많았다.

본 실험은 재식밀도와 재식양식이 Sorghum-Sudangrass hybrid(sordan 79)의 생육특성, 건물수량, 조단백질수량, 기호성 등에 미치는 영향을 알아보고자 실시하였으며 그 결과를 요약하면 다음과 같다.1. 재식밀도가 높아짐에 따라 초장, 엽장, 엽폭(P<0.05), 엽수는 대체적으로 감소하였고, 같은 재식밀도에 있어서는 직사각형구에서 증가하였다.2. 1차 예취시 엽비솔은 밀식구중 직사각형구(30kg/ha, 25cm×4cm)

실소시비량 및 재식거리간 벼 흰빛잎마름병 발병과 관계를 조사한 결과는 다음과 같았다. 1. 질소시비량과 발병과는 시비량의 증가에 따라 발병율이 많아지는 경향을 나타냈으며, 7.5kg/10a<15kg/10a<30kg/10a의 순으로 발병이 높았다. 2. 질소시비량이 배비(30kg/10a)일 경우에는 재식거리와는 관계없이 전체적으로 높은 발병율을 나타내었다. 3. 표준시비구(15kg/10a)에서는 (표준재식거리)에서 발병도에 큰 차이를 볼 수 없었으나, 재식거리가 넓은 구에서 발병이 높았다.

Background : In recent years, the demand for oriental cuisine has increased due to the increase of multicultural families and dietary changes, and Coriandrum sativum is also consumed steadily. Therefore, this study was conducted to establish the optimum planting density for high-quality seed production of Coriandrum sativum in order to increase the utilization of leafy vegetables and establish a foundation for production throughout the year through house cultivation Methods and Results : This experiment was carried out from March to August 2017 at a house facility located in Namwon-si (500 m above sea level) in Jeollabuk-do. Seeds of Coriandrum sativum were sown on March 10, 2017 and planting density was set at 4 levels of 10 × 5 ㎝, 10 × 10 ㎝, 10 × 20 ㎝, and 10 × 30 ㎝. Seeds were harvested on August 2 and 142 days after sowing. Growth characteristics of C. sativum were investigated on May 16, 66 days after sowing. Plant height, leaf length and leaf width were good at 52.9 ㎝, 3.8 ㎝, and 4.1 ㎝ in planting density of 10 × 10 ㎝, respectively, but there was no statistically significant difference between treatments. As a result of examining the number of leaflets per plant, 20.9 leaves in 10 × 30 ㎝ treatment was the best and the difference was significant. The fresh weight of the overground part was the highest at 2,322 ㎏/10a in 10 × 10 ㎝ treatment. The total fresh weight of the overground and underground parts were 2,633 ㎏/10a and 2,572 ㎏/10a at 10 × 10 ㎝ and 10 × 20 ㎝, respectively. The total weight of seeds per treatment was the highest at 146 ㎏/10a at 10 × 10 ㎝ treatment, but the difference was not significant. Conclusion : As a result of the experiment to determine the proper planting density, the growth characteristics and the total weight of seeds were good at 10 × 10 ㎝ treatment, but there was no statistically significant difference. Therefore, when C. sativum are cultivated for the purpose of seed production, the planting density of 10 × 30 ㎝ is considered to be the most appropriate for seed requirement and labor saving.

Background : Recently demand of Rehmannia glutinosa Liboschitz increased rapidly using a food and cosmetics as an emphasis on well-being. Cultivation tests of Rehmannia glutinosa for new varieties are tested around Geumsan area of Chungnam province. It is different for the soil condition and wether between Chungnam area and Gyeongbuk area. It is needed cultivating tests of new variety region of north Gyeongbuk. Methods and Results : Test variety of Rehmannia glutinosa was Dagang and test place was 918 Banguri Jangsu Yeongju. Planting density of Dagang was 20 × 20 ㎝, 30 × 20 ㎝, 40 × 20 ㎝ and all seedstocks were disinfected before sowing. Composite fertilizer use 60 ㎏/10 a and press cake use 600 ㎏/10 a on the test field. Black vinyl muching was using for preventing of grass. Leaf length, leaf width and leaf number were no difference in growth among 20 × 20 ㎝, 30 × 20 ㎝ and 40 × 20 ㎝. There was no difference in root length, root number root weight between planting distances, and root width was the largest at 30 × 20 ㎝ and 16.3 ㎜, Followed by 20 × 20 ㎝ and 40 × 20 ㎝ in order. Total root weight of 20 × 20 ㎝ was higher than other plant density and total income of 20 × 20 ㎝ was higer than others. Roots rot of root was not significant difference among plant density. It was the first test Dagang around north Gyeongbuk area and plant density of 20 × 20 ㎝ was higher output than 30 × 20 ㎝, 40 × 20 ㎝. Conclusion : Plant density of 20 × 20 ㎝ was selected for cultivating Dagng around north Gyeongbuk area. 20 × 20 ㎝ of cultivating Dagang get a more roots and also increase famers income.

Background : For the GAP standard cultivation, weed occurrence pattern was investigated by planting density and mulching method of Bupleurum falcatum L. Methods and Results : Vinyl and rice straw were used for mulching. The planting density were 10, 20, and 30 cm, and the spacing between plants were 5 ㎝. The amount of weed emergence were examined twice at the end of July and at the end of September. The degree of importance was based on the Braun-Branquet’s dominance value distinction criterion. As a result, the kind of total weeds emerged during the cultivation of Bupleurum falcatum L. were identified as 20 species in 10 families. Amount of weed’s occurrence were the highest in rice straw covering after 10 × 5 ㎝ sowing, and it were lowest in vinyl mulching after 30 × 5 ㎝ sowing. The frequency of weed emergence was highest with 10 species of 8 families in rice straw mulching treatment. On the other hand, the treatment with the least emergence frequency of weeds was 30 × 5 ㎝ sowing after vinyl mulching, and weeds of 7 species of 6 families appeared. In the second survey in September, weeds of 15 species in 9 families were identified in the test field. The amount of weed’s occurrence were the highest in rice straw mulching after 10 × 5 ㎝ sowing, and it were the least in the case of vinyl mulching after 30 × 5 ㎝ sowing. The frequency of emergence of weeds was highest in rice straw mulching after 20 × 5 ㎝ sowing, and the kind of weeds were 11 species of 8 families. The treatment of the lowest emergence frequency of weeds was 30 × 5 ㎝ sowing after vinyl mulching. Three kinds of weeds occurred. Conclusion : From the above results, it is expected that we can suppress the weed occurrence at the planting density of 30 × 5 ㎝ after vinyl mulching at the sowing of Bupleurum falcatum L.

Background : Gangwon-do (Province) is chief producing district of six-year-old raw material of red ginseng and transplanting culture is more than 90%. The 6-year-old red ginseng is easy to differentiate in quality and can secure a stable market, but it has high disadvantages such as high seedling cost, effort cost, and long term cultivation. Therefore, it is necessary to develop environment-friendly products that enhance price competitiveness based on 3 to 4-year-old ginseng by using direct seedling cultivation techniques. When ginseng seed sown directly, it is highly productive and has high disease resistance, which is advantageous for environment-friendly cultivation. Thus, it is advantage to save work force in seed production stage. The purpose of this study is to find the planting density for 4-year-old ginseng. Methods and Results : In order to determine proper planting density, ginseng growth characteristics such as root length, root diameter, raw weight, and yields were investigated at 4-year-old ginseng after planting 34, 67, and 100 roots per ㎡. As a result, the root length was the longest at 33.9 ± 5.45 ㎝ in 67 roots/㎡, and there was no difference in root diameter. The raw weight of 4-year-old ginseng was the highest at 65.1g in 34 roots/㎡. However, yields were 4.3 ± 0.78 and 4.8 ± 0.50 ㎏ in the 67 roots/㎡ and 100 roots/㎡, respectively, which were higher than the 34 roots/㎡. Conclusion : The proper planting density for direct seedling cultivation of yunpung cultivar was 67 - 100 roots/㎡, and these results could be applied to increase productivity in direct seeding cultivation of ginseng.

The subject of this experiment is to supply basic data to inhibit non-productive tillers which are uneconomical for mechanical harvesting and to evaluate optimum planting density and sowing date in central district. Total number of tillers and effective first and second of tillers according to different planting density was higher in 80 ㎝ ridge than 60 ㎝ ridge in proso millet. The wider between plant distance on the ridge, the more increased total number of tillers and effective first and second of tillers. The highest effective tillers (91.7 %) in the first tillers was obtained from the second sowing date (23 May) among different sowing date and next is in the order of 3 rd (13 June, 89.8%) > 1 st (2 May, 85.6%) > 4 th (4 July, 85.2%). The percentage of effective tillers in the second tillers was decreased in the order of 2 May (53.7%), 23 May (40.7%), 13 June (22.2%), 4 July (0%) as the sowing date was delayed. There was no significant difference in days to heading and days to ripening according to different planting density. Although culm length was increased as planting density was increased, whereas number of tillers, stem diameter, ear length, grains per ear and 1000 grain weight was decreased. In the growth and yield characteristics of proso millet according to different sowing date, days to heading and days to ripening, culm length, stem diameter, ear length, grains per ear and yield per 10a were decreased. After the sowing date of 13 June, the reduction of growth and yield characteristics were higher because of excess-moisture injury.

Small-sized tuber of sweet potato (Ipomoea batatas Lam.) is more preferred by Korean consumers, because it is convenient to eat with hands, and can easily be steamed or roasted in small pan as a healthy snack for a small family. The present study was aimed to investigate the effect of highdensity plantings and harvesting times on production of smallsized tuber (50~200 g). Four varieties (‘Annobeny’, ‘Daeyumi’, ‘Shinzami’, and ‘Yeonhwangmi’) were planted in 2-row zigzag high-density planting (75×30 cm, A; 75×25 cm, B) and 1-row planting (75×25 cm, control) covered with black vinyl film on May 23th, 2014. Marketable yields and small-sized tuber yields were compared between 120- and 150-day harvesting. Vine length and fresh weight per plant were significantly decreased in 2-row planting A and B plots compared to the control at 120 days after planting. Weight of tuber per plant, mean weight of tuber and number of tuber per plant were significantly decreased in 120-day harvesting of A and B plots than in the control. Marketable yields per 10a were increased by 17% (2.4 ton‧10a -1 ) and 8% (2.6 ton‧10a -1 ) in 120-day harvesting of A and B plots compared to the control (2.4 ton‧10a -1 ), and those were largely increased by 29% (4.0 ton‧10a -1 ) and 26% (3.9 ton‧10a -1 ) in 150-day harvesting than in the control (3.1 ton‧10a -1 ). Proportions of small size tuber (50~200 g) were increased by about 65% in 150-day harvesting of A and B plots compared to the control (55.3%). Small-size tuber yield and marketable yield were highly increased in 150-day harvesting of 2-row zigzag high-density planting A (75×30 cm).

Soybean is one of the important food crop around the world. Especially in East Asia, it is the main ingredient for traditional food like soy sauce and soy paste. The double cropping system including soybean following onion, Chinese cabbage, and potato is widely adopted in Southern region of Korea. In this system, sowing date of second crop (soybean) can be delayed depending on first crops’ growth period and weather condition. When planting date is delayed it is known that soybean yield is declined because of shorter vegetative growth period and earlier flowering induced by warm temperature and changes in photoperiod. The objective of this study was to determine soybean growth and yield responses as plant populations at late planting date. Field experiment was conducted at Department of Functional Crop, National Institute of Crop Science, RDA located in Miryang, Gyeongsangnam-Do for two years (‘13-’14) in upland field with mid-late maturity cultivar Daewon. A split-plot block design was used with three replications. Main plots were three sowing dates from June 20 to July 20 with 15 days intervals, and subplots were 4 levels of planting densities. Data of maturity (R8) was recorded, yield components and yield were examined after harvesting. Experimental data were analyzed by using PROC GLM, and DMRT were used for mean comparison. Optimum planting population for maximizing soybean yield in late planting which compared with standard population. In mid-June planting, higher planting density causes increased plant height and decreased diameter which lead to higher risk of lodging, however, reduced growth period due to late planting alleviated this problem. Therefore higher seeding rates can provide protection against low seedling emergence caused by late planting in this region.

This experiment was carried out to determine the optimum planting density for rice pot seedling cultivation in wheat-rice double cropping system in Honam plain area. A mid-late maturing rice variety ‘Chinnong’ was raised in pot seedling tray and conventional tray for 30 days, and then transplanted on June 25 in 2012 and 2013. Four different planting densities (15.2, 18.9, 21.6, and 25.3 hills per m 2 ) in pot seedlings were applied as treatment. Conventional tray seedling was implicated as control at a single planting density of 27.8 hills per m 2 . In this experiment, the number of effective tillers was increased as planting density increasing, but stem diameter was decreased. Pot seedling showed higher stem diameter and effective tillers than the control. Heading dates of pot seedling plots were not significantly different between the planting densities but 2 days faster than the control. Culm length, number of panicles, panicle length, and ripening grain ratio were higher in pot seedling compared to the control, but 1000-grain weight showed no significant difference. Milled rice yields in pot seedlings ranged from 5.19 to 5.43 t ha -1 , and the highest yield was observed in 21.6 hills per m 2 . Head rice ratios in pot seedlings and the controls were not significantly different. Above results on planting density of rice pot seedling cultivation would be applicable to wheat-rice double cropping and also to late transplanting cultivation of rice single cropping.