본 실험은 재식밀도와 재식양식이 Sorghum-Sudangrass hybrid(sordan 79)의 생육특성, 건물수량, 조단백질수량, 기호성 등에 미치는 영향을 알아보고자 실시하였으며 그 결과를 요약하면 다음과 같다.1. 재식밀도가 높아짐에 따라 초장, 엽장, 엽폭(P<0.05), 엽수는 대체적으로 감소하였고, 같은 재식밀도에 있어서는 직사각형구에서 증가하였다.2. 1차 예취시 엽비솔은 밀식구중 직사각형구(30kg/ha, 25cm×4cm)

To determine optimal plant density of forage rape in southern areas of Korea, Velox, the highest yielding variety among seventeen introduced varieties of forage rape, was grown under five different plant densities. The results obtained are summarized as f

초 록 벼이삭 선충의 피해를 구명코저 접종시험을 실시하였다. 1. 선충의 기생은 벼의 생육 특히 분얼수에 많은 영향을 주었다. 2. 피해경율은 온도 상승과 더불어 증가하여 출수후에는 약 3배로 늘었다. 3. 생육 및 수량에 영향을 줄 수 있는 피해경율은 이상이다. 즉 피해발현 초기에 이하일 때는 생육과 수량에 영향이 없었고 일때 이면 의 감수를 초래하였다. 4. 수량구성요소별로는 1000립중 립수 수수의 순으로 영향을 받았다.

벼 이삭선충(심고선충), Aphelenchoides besseyi Christie의 접종밀도가 벼의 생육 및 본선충의 자성충의 체장에 미치는 영향을 알기 위하여 온실내에서 포트시험을 수행하였다. 선충을 접종하였을 경우에 벼의 초장, 분벽수 및 지상부의 건물중의 감소를 초래했으며 접종밀도가 높아짐에 따라 자성충의 체장도 감소하였다.

Background : In recent years, the demand for oriental cuisine has increased due to the increase of multicultural families and dietary changes, and Coriandrum sativum is also consumed steadily. Therefore, this study was conducted to establish the optimum planting density for high-quality seed production of Coriandrum sativum in order to increase the utilization of leafy vegetables and establish a foundation for production throughout the year through house cultivation Methods and Results : This experiment was carried out from March to August 2017 at a house facility located in Namwon-si (500 m above sea level) in Jeollabuk-do. Seeds of Coriandrum sativum were sown on March 10, 2017 and planting density was set at 4 levels of 10 × 5 ㎝, 10 × 10 ㎝, 10 × 20 ㎝, and 10 × 30 ㎝. Seeds were harvested on August 2 and 142 days after sowing. Growth characteristics of C. sativum were investigated on May 16, 66 days after sowing. Plant height, leaf length and leaf width were good at 52.9 ㎝, 3.8 ㎝, and 4.1 ㎝ in planting density of 10 × 10 ㎝, respectively, but there was no statistically significant difference between treatments. As a result of examining the number of leaflets per plant, 20.9 leaves in 10 × 30 ㎝ treatment was the best and the difference was significant. The fresh weight of the overground part was the highest at 2,322 ㎏/10a in 10 × 10 ㎝ treatment. The total fresh weight of the overground and underground parts were 2,633 ㎏/10a and 2,572 ㎏/10a at 10 × 10 ㎝ and 10 × 20 ㎝, respectively. The total weight of seeds per treatment was the highest at 146 ㎏/10a at 10 × 10 ㎝ treatment, but the difference was not significant. Conclusion : As a result of the experiment to determine the proper planting density, the growth characteristics and the total weight of seeds were good at 10 × 10 ㎝ treatment, but there was no statistically significant difference. Therefore, when C. sativum are cultivated for the purpose of seed production, the planting density of 10 × 30 ㎝ is considered to be the most appropriate for seed requirement and labor saving.

Background: The cultivation of ginseng (Panax ginseng C. A. Meyer) in greenhouses could reduce the use of pesticides and result in higher yield; however, construction costs are problematic. The adaptation of direct-sowing culture in greenhouses could reduce the cost of ginseng production. Methods and Results: To improve seedling establishment in direct-sowing culture, effects of sowing density (SD), number of seeds sown per hole (SN), and thinning (TH) treatment on the root yield were investigated after 3 years of seeding. The emergence rate was significantly influenced by SD, but not by SN or TH. Damping-off and rusty roots increased with an increase in SN with diminishing effects of SN on seedling establishment. Root weight and diameter were affected by SD, SN, and TH, however, there were no statistical significances. The total number of roots harvested per unit area increased with increasing SD and SN, and the weight of roots was affected by SD, but not by SN or TH. Conclusions: Multi-seed sowing per hole and/or thinning might not be an efficient method for the direct-sowing culture of ginseng. The SD for direct seeding culture in greenhouses should be approximately 33 - 42 seeds/㎡ for an optimum yield of 3-year-old ginseng.

The subject of this experiment is to supply basic data to inhibit non-productive tillers which are uneconomical for mechanical harvesting and to evaluate optimum planting density and sowing date in central district. Total number of tillers and effective first and second of tillers according to different planting density was higher in 80 ㎝ ridge than 60 ㎝ ridge in proso millet. The wider between plant distance on the ridge, the more increased total number of tillers and effective first and second of tillers. The highest effective tillers (91.7 %) in the first tillers was obtained from the second sowing date (23 May) among different sowing date and next is in the order of 3 rd (13 June, 89.8%) > 1 st (2 May, 85.6%) > 4 th (4 July, 85.2%). The percentage of effective tillers in the second tillers was decreased in the order of 2 May (53.7%), 23 May (40.7%), 13 June (22.2%), 4 July (0%) as the sowing date was delayed. There was no significant difference in days to heading and days to ripening according to different planting density. Although culm length was increased as planting density was increased, whereas number of tillers, stem diameter, ear length, grains per ear and 1000 grain weight was decreased. In the growth and yield characteristics of proso millet according to different sowing date, days to heading and days to ripening, culm length, stem diameter, ear length, grains per ear and yield per 10a were decreased. After the sowing date of 13 June, the reduction of growth and yield characteristics were higher because of excess-moisture injury.

Soybean is one of the important food crop around the world. Especially in East Asia, it is the main ingredient for traditional food like soy sauce and soy paste. The double cropping system including soybean following onion, Chinese cabbage, and potato is widely adopted in Southern region of Korea. In this system, sowing date of second crop (soybean) can be delayed depending on first crops’ growth period and weather condition. When planting date is delayed it is known that soybean yield is declined because of shorter vegetative growth period and earlier flowering induced by warm temperature and changes in photoperiod. The objective of this study was to determine soybean growth and yield responses as plant populations at late planting date. Field experiment was conducted at Department of Functional Crop, National Institute of Crop Science, RDA located in Miryang, Gyeongsangnam-Do for two years (‘13-’14) in upland field with mid-late maturity cultivar Daewon. A split-plot block design was used with three replications. Main plots were three sowing dates from June 20 to July 20 with 15 days intervals, and subplots were 4 levels of planting densities. Data of maturity (R8) was recorded, yield components and yield were examined after harvesting. Experimental data were analyzed by using PROC GLM, and DMRT were used for mean comparison. Optimum planting population for maximizing soybean yield in late planting which compared with standard population. In mid-June planting, higher planting density causes increased plant height and decreased diameter which lead to higher risk of lodging, however, reduced growth period due to late planting alleviated this problem. Therefore higher seeding rates can provide protection against low seedling emergence caused by late planting in this region.

This study was conducted to investigate the effects of sowing density, number of seeds sown per hole, andthinning treatment on growth characteristics and disease occurrence in Panax ginseng under direct sowing cultivation in ablue plastic greenhouse. Seedling were grown from 2 or 3 seeds sown, and the healthiest was only retained, while the restwere thinned out at the foliation stage. NO3-N, P2O5, and organic matter content differed significantly between growthconditions in the plastic greenhouse and in conventional shade in the soil. Disease also tended to be higher in the conven-tional shade than in the plastic greenhouse. Plant height and stem length showed an increasing trend with increasing sowingdensity and number of seeds sown per hole. However, these measures noticeably decreased when thinning treatment wasconducted. Growth of the subterranean part of ginseng was not markedly influenced by sowing density, the number of seedssown per hole, or thinning treatment. Root weight, which is an important factor in yield, was significantly affected by thenumber of seeds sown and thinning treatment. Interestingly, root weight tended to be higher in the thinning treatment plotthan the untreated control plot. Damping-off and root rot increased noticeably as the number of seeds sown increased. Dis-ease also tended to be substantially higher in the thinning treatment plot than the untreated control. However, physiologicaldisorder of the plants did not vary with sowing density, the number of seeds sown, or thinning treatment.

This study was carried out to investigate the variation of growth and yield using different planting densities and vinyl mulching in S. miltiorrhiza cultivation. Top plant growth was observed in the 30×30cm planting density of S. miltiorrhiza;, plant height, leaves and branches were larger than in the other treatments. Root length, root diameter, and supporting roots of underground part were increased as planting density was wide, and dry root weight was increased in 30×30cm. However, yield was highest at 294 kg/10a in the planting density of 30×10cm. The use of 30-31cm white and black vinyl mulching had no significant effect on the plant height of S. miltiorrhiza, as compared to non-mulching. However, the highest volume of leaves and plant weight was observed in plants using 24.7 black vinyl mulching. Dry underground root weight was highest in black vinyl mulching at 21.7 g compared to 17.0 g for non-mulching. Yield per 10a increased by 28% using black vinyl mulching compared to non-mulching. Based on the results of this study, planting density of 30×10cm and black vinyl mulching are the most suitable in the cultivation of S. miltiorrhiza.

본 실험은 스탠다드 국화 ‘백마’와 스프레이 국화 ‘오렌지엔디’ 품종에 있어서 재식밀도와 멀칭재료에 따른 절화 생육과 흰녹병 발생정도를 알아보고자 실시하였다. 스탠다드 국화 ‘백마’는 6줄 정식 처리구에서 절화장, 줄기직경, 엽수, 절화무게, 화폭, 꽃무게 등의 생육이 8줄이나 10줄에 비해 양호하였다. 또한 흰녹병 발생률도 10줄 정식 처리구에서 68.9%로 가장 높았고, 6줄 정식 처리에서 48.9%로 가장 낮게 나타났다. 스프레이 국화 ‘오렌지엔디’는 6줄 정식 처리구에서 줄기직경, 엽수, 절화무게, 화폭 등 다른 처리에 비해 절화생육이 양호하였다. 흰녹병 발생률은 10줄 정식 처리구에서 68.9%로 가장 높았고, 6줄 처리에서 28.9%로 가장 낮았다. 스탠다드 국화 ‘백마’에 있어서 무멀칭에 비해 PE 필름으로 멀칭한 처리에서는 생육이 양호하였는데, PE 필름색에 따른 생육에는 큰 차이가 없었다. 흰녹병 발생률은 무멀칭 처리구에서 93.3%로 가장 높았고, 녹색과 흑색 PE 필름 멀칭 처리구에서 42.2~60%로 낮았고 감염 엽수 및 병징수가 적었다. 스프레이 국화 ‘오렌지엔디’의 절화장은 투명과 녹색 PE 필름으로 멀칭한 처리구에서 길었고, 줄기직경, 엽수, 화폭, 꽃수 등에서는 처리 간 차이가 없는 것으로 나타났다. 흰녹병 발생률은 흑색 PE 필름 멀칭 처리에서 가장 낮았고. 흰녹병 발생엽수와 병징수도 흑색 PE 필름 멀칭 처리에서 가장 적었다.

본 연구는 멀칭재료와 재식방법에 따른 shallot의 생육에 미치는 영향을 조사하였다. 멀칭비닐 종류별 시험에서 투명 PE필름 처리구에서 흑색 PE필름보다 엽수, 초장, 엽초장, 엽초경이 더 좋았고, 상품수량도 21%나 증수되었다. 그러나 구의 크기별 분포에서는 유의적인 차이가 없었다. Shallot의 재식밀도별 수량은 120 cm 5조(10 a당 20,833주)에서 1,332 kg으로 120 cm 2조(10 a당 12,500주)에서보다 1.7배가 증수되어 밀식재배가 유리하였다. 따라서 shallot의 재배는 투명 PE필름 멀칭에 휴폭 120 cm에 5조가 좋을 것으로 사료된다.

Cultural practices of Asparagus cochinchinensis in highland area were performed for a potential medicinal crop. These studies were examined to propagation methods, planting densities, nitrogen treatments, and cropping years. The results are summarized as follows. The adequate number of buds per tuberous root was 4 for vegetative propagation because the number of tuberous root harvested was 16.8 and the yield was also the highest, exhibiting 1,060 kg/10a. The suitable planting time for vegetative propagation was later than early April. If the earlier tuberous roots were planted, the less they emerged. The highest emergence rate was obtained from the planting density of 30×20cm as 97.2% while the yield was highest in the 30×15cm density, exhibiting 1,883 kg/10a with emergence rate at 94.9. It seemed that the higher planting density promoted plant height growth and yield in Asparagus cochinchinensis. The highest fresh weight was recorded at 6 kg/10a of nitrogen fertilizer into the sandy loam soil compared to the level of 0, 3, 9 kg/10a. The yield was increased with cropping years. However, the proper harvesting time was the second year of cultivation because the rate of weight increase was maximized in the 2-year-old tuberous root. The yield in the third year was decreased as compared to that of the second year.

상위 씨감자 순환식 심지양액재배에 있어서 송이의 배지 재료로서의 이용 가능성과 알맞은 재식밀도를 구명하고자 송이 + 피트모스(1:2, v/v)와 펄라이트 + 피트모스(1:2, v/v) 배지에 대지 소괴경(7.0±0.2g )을 상자(0.16m2 )당 각각 3, 6, 9, 12, 15주(19, 38, 56, 76, 95/m2 )를 심어 생육 및 수량을 조사한 결과를 요약하면 다음과 같다. 1. 조사된 모든 형질에 있어서 배지종류와 재식밀도간 유의한 상호작용이 없었다. 생육불량주가 상자당 3주~ 12주재식구에서 8.3~14 이었으나 15주재식구에서는 25.8%이었다. 2. 줄기 및 잎의 길이, 주당 경수 등은 배지종류에 따른 차이가 없었으나 m2 당 ~geq5g 괴경수 및 괴경수량은 송이혼용배지에 비해 펄라이트혼용배지에서는 각각 21% 및 32% 증가되었다. 3. 재식밀도가 상자당 3주에서 9주로 증가됨에 따라 줄기 및 잎의 길이가 작아졌으나 더 밀식될 때에도 이상 감소되지 않았으나 주당 괴경수 및 괴경수량은 밀식할수록 감소되었다. 4. 재식밀도가 상자당 3주에서 15주로 증가됨에 따라 m2 당 ~geq5g 괴경수 및 괴경수량은 각각 101개와 6.3 kg에서 269개와 11.6 kg으로 증가되었다. 5. 소괴경 심지양액재배 시 펄라이트 + 피트모스 배지가 보다 적합하며, 생육불량개체비율, m2 당 ~geq5g 괴경수과 괴경수량 등을 고려한 알맞은 재식밀도는 소괴경이 충분할 경우 m2 당 76주 정도, 부족할 경우 56주 정도로 판단된다.

무가온 하우스에서 벼 육묘상자(30×60×3cm )를 이용한 고품질 돌나물 생산체계를 확립하기 위하여, 완주 및 금산지역종을 재료로 육모상자당 40, 60, 80개체씩 9월7일에 삽식한 다음, 월동전후 두 지역종간 생육특성과 수량성을 조사하였다. 삽식후 60일째에 초장과 줄기수는 삽식밀도 간에 유의한 차이를 보이지 않았으나, 두 지역종의 잎장과 식물체 당 곁가지 수는 40개체보다 80개체 밀식에서 유의한 감소를 보였다. 월동후 1차 수확시(4월 20일), 금산 지역종의 생육은 삽식밀도간 차이가 없었으나, 완주 지역종의 줄기직경, 줄기당 마디수와 잎수 등은 40개체 삽십보다 80개체 삽식에서 유의한 감소를 보였다. 생체중과 건물중은 두 계통 모두 삽식밀도간 차이가 없었으나, 완주지역종에서 유의한 증가를 보였다. 2차 수확시(6월 5일)의 생육은 두 지역종 모두 총 줄기수에서만 40개체 삽십보다 80개체 삽식에서 유의한 증가를 보였다. 생체중과 건물중은 금산 지역종에서 40개체 삽십보다 60개체 삽식에서 유의하게 증가하였고, 완주 지역종의 건물중이 금산 지역종보다 높았다. 완주 지역종은 줄기가 두껍고 마디가 짧으며, 잎이 크고 웃자라지 않아, 수량성이 금산 지역종보다 높았다. 따라서 무가온 하우스에서 벼 육묘상자를 이용한 돌나물 재배시 완주 지역종이 금산 지역종보다 적합하였으며, 재식밀도는 상자당 40개체가 적당하였다.