간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제18권 제5호 (2016년 10월) 29건
21.
2016.10
구독 인증기관 무료, 개인회원 유료
In this study, the elevator safety device was investigated analytically. It is the only safety device that can lift the brake in an emergency situation. When the safety device is in contact with the guide rail and the brakes applied, the structure can be stopped due to the friction occurring between them. Study on the shape of the portion contacting the safety device and the guide rail wedge directly were performed based on four cases. Each cases were classified according to the contact conditions. The contact conditions are mainly line contact, surface contact, and point contact. According to the contact conditions, the frictional stress due to the forced displacement that occurred during the elevator braking is also considered. For the perpendicular guide rail and sliding distance, the braking force shows excellent results for the line contact conditions. The results also showed less distribution.
4,000원
22.
2016.10
구독 인증기관 무료, 개인회원 유료
The quality of garlic productions and reduction of labor cost which are important to overcome price competition against import garlic. Improving to the quality of garlic production and reducing of labor cost, The garlic seed must be planted with the downward positioning of garlic seed root. This research was conducted to develop a crank-link mechanism for planting garlic seed with the downward positioning of garlic seed root. Computer simulation was conducted for developing a crank-link mechanism. A prototype of developing crank-link mechanism was manufactured and laboratory tests was performed. As results, Followings are achievements in range of plant depth = 50~70 (mm) with tolerance depth 3 mm, planting hole size = 45×50 (mm) with tolerance size 5 mm at planting speed 0.3 m/s.
4,000원
23.
2016.10
구독 인증기관 무료, 개인회원 유료
The electric flexible videoscope was developed. The developed components of the videoscope are insertion tube, 360 degrees full articulation tip with joystick control, detachable probe part, camera module equipped with CMOS sensor and adjustable high-intensity white LED light sources. The insertion tube can have strong torsional rigidity from the components of spiral spring and tungsten mesh tube. The handset with joystick control makes it possible to manipulate the videoscope tip articulation in 360 degrees of all directions easily. Over 90 degrees of bending angle measured from the straight camera probe makes it possible to inspect the surface of side wall. The detachable probe model can separate insertion tube with probe. It is useful to select proper length of insertion tube. Several tests were performed to check the development objectives.
4,000원
24.
2016.10
구독 인증기관 무료, 개인회원 유료
Blueberries are popular early summer fruits. While high temperature in the harvest period induces ripeness of fruits, increases tidal volume and cause reducing their hardness. This result in weight reduction and deterioration of fruits. So, controling temperature of harvested fruits is important to keep storage quality and shipping quality. To decrease the temperature of harvested fruits, we made a precooler using differential pressure method. With infrared thermometer we measured the temperature change of harvested fruits and reviewed the application and utility of the precooler.
4,000원
25.
2016.10
구독 인증기관 무료, 개인회원 유료
This paper is about improvements to prevent the crack on welding parts of bleed air duct and vent tube in Advanced Trainer ECS owing to vibration. The configurations and the path of vent tube should be changed to prevent the crack. To assure the result of improvements, measured the status of each pressure condition attaching pressure censers on duct and vent tube. The result of life analysis shows that a crack does not happen on improved configuration while a crack initiates after 19th flight and thru cracking could happen after the 30th flight on previous configuration.
4,000원
26.
2016.10
구독 인증기관 무료, 개인회원 유료
The paper presented the driving mechanism structure of unmanned ground vehicle. The most fundamental feature of mobile platform has the transformable crawler. The crawler system transforms the shape of the track based on a driving mechanism. By adopting a double shaft structure to simply the crawler system was UGV platform. A automatic transmission is built to increase driving torque of unmanned ground vehicle. Available driving modes include a speed mode to drive at top speed on flat surfaces and a torque mode to handle uneven terrain, obstacles and stairs. The double shaft Also UGV platform was tested on uneven surfaces including muddy, sandy, and gravelly terrain. The UGV platform has shown good results in the driving test.
4,000원
27.
2016.10
구독 인증기관 무료, 개인회원 유료
A precise control of the launcher in MLRS(Multiple Launcher Rocket System) is important for a mission completion. During the field operation of the MLRS, a friction noise was heard in the elevation clutch that controls the launcher. It was confirmed that unsteady friction between friction plates and clutch plates has caused the noise in the clutch. Conducting the analysis of drive mechnism in the clutch, there was a possibility of the unsteady friction because of moderated spring constant. Therefore, after performing experiments on the elevation clutch varied with spring constant, it was determined the proper spring constant. Finally, an improvement on the spring constant in the elevation clutch is expected in the future by utilizing the result of this study.
4,000원
28.
2016.10
구독 인증기관 무료, 개인회원 유료
We have developed a DH-PROTO equipment to measure the Unit-Water Content of concrete. In this paper, using an accredited certification HI-330 and developed DH-PROTO to measure the Unit-Water Content, it was evaluated by comparing the measurement stability.
In experimental results by using a capacitive equipment DH-PROTO and HI-330, Estimation error of DH-PROTO and HI-330 according to the type of binder is -4.4 to 2.0%, -7.4 to 4.0%, measuring equipment for Unit-Water Content in concrete showed excellent performance in reliability assessment measures. Also, the estimation error according to the type of fine aggregate was appeared to 3.4~10.4 % and 2.8~9.1%, was determined that excellent performance and accuracy levels with it. Thus, it expected to be released as a commercial product through further studies.
4,000원
29.
2016.10
구독 인증기관 무료, 개인회원 유료
This study presents the stone cutter design that can rotate and change the cutting side of the stone automatically by the combination structures of the rotatable and foldable plates. Foldable plates are consisted with the iron plate and the hydraulic cylinders system(1500W pump power) which can generate high pressure to raise the plates and the stone. Additionally, rotatable plates are designed by gear system which has high gear ratio(1:8) for rotating heavy stone(5ton) easily. We analyzed the movement of the stone and investigated the total system of the stone cutter including a rotator and a tilter. Moreover, we constructed a control board to control the system accurately. This system can induce high quality cutting process controlled within errors of 5% and also reduce the process time from about 20 min to 90 sec by the automatic system.
4,000원
1
2
