간행물
한국기계기술학회지 KCI 등재 Journal of the Korean Society of Mechanical Technology 韓國機械技術學會誌
- 발행기관 한국기계기술학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1229-604X (Print)2092-0385 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 기계공학 공학 분류의 다른 간행물
- 십진분류KDC 550DDC 620
권호리스트/논문검색
제25권 제4호 (2023년 8월) 30건
21.
2023.08
구독 인증기관 무료, 개인회원 유료
In this study, the change in the mold opening stroke of important functional parts according to the 20, 50, 80, and 100% increase in the injection speed of a hydraulic 150 ton hydraulic injection molding machine was studied to verify the accuracy of the injection speed and mold opening stroke and the reproducibility of the standard deviation. The null and alternative hypotheses were confirmed by conducting hypothesis verification according to the experimental condition change using the experimental design method.
4,000원
22.
2023.08
구독 인증기관 무료, 개인회원 유료
A spiral flow path was applied to solve the problem of the existing straight flow path in the leveling shaft, a key component of the self-levelizer that can maintain the height according to the change in payload in EV, SUV. In this study, flow analysis was performed to check the velocity, pressure drop, and flow direction of oil according to the main operating conditions of the leveling shaft with a spiral flow path. As a result of the study, a leveling shaft with a spiral flow path is likely to improve fluid properties around the orifice and inlet valve under compression conditions, and it is judged to have a development application effect.
4,000원
23.
2023.08
구독 인증기관 무료, 개인회원 유료
The change in the performance of the range hood according to the pressure change was investigated through a comparative experiment, and the conclusion is as follows. KS C 9304: In 2020, static pressure was applied at 100 Pa according to the fan standard, and the test was conducted by varying the outlet diameter and power consumption. In the case of Motor power 55W, the air volume value was 184.6 when the outlet diameter was 125mm. As a result of the test, if the power consumption is 52.0W, the diameter of the outlet is 125mm, and the power consumption is 60.8W, and the diameter of the outlet is 100mm, it meets 160 or more and less than 200 (constant pressure 100Pa).
4,000원
24.
2023.08
구독 인증기관 무료, 개인회원 유료
In this paper, the key assembly of the recently developed light machine gun-Ⅱ sighting device was identified as prone to experiencing horizontal noise caused by unstable voltage fluctuations under high-temperature conditions during the defense environmental stress screening test. The primary objective ot this study is to address the issue of horizontal noise through circuit analysis and device parameter tuning, aiming to eliminate its presence.
4,000원
25.
2023.08
구독 인증기관 무료, 개인회원 유료
In a steam turbine system for nuclear power plant, the exhaust loss consists of leaving loss, hood loss, turn-up loss and restriction loss. The exhaust loss during rated power operation of steam turbine equipment is inevitable, but it can be optimized by several factors such as last stage blade length, condenser vacuum and steam velocity. In this paper the relationship between the exhaust loss and electrical output of domestic nuclear power plants was quantitatively evaluated, and ways to reduce this loss were considered.
4,000원
26.
2023.08
구독 인증기관 무료, 개인회원 유료
Small hydropower systems have emerged as an attractive solution for areas with low head and flow rates, offering versatility for implementation in diverse locations such as rivers and wastewater treatment plants. This research specifically focuses on exploring the potential of small hydropower generation within wastewater treatment plants. Through the utilization of computational fluid dynamics (CFD) analysis, the study successfully predicted the torque and power generation capacity of the installed turbine. The analysis underscored the effective control of fluid flow achieved through careful turbine design, including considerations of blade shape and quantity. For instance, in the case of the Tancheon wastewater treatment plant, the study revealed the ability to generate a torque of approximately 7000 Nm, translating to an estimated power production of around 48.3 kW per hour. Ultimately, this research significantly contributes to evaluating the feasibility and viability of small hydropower generation within wastewater treatment plants.
4,000원
27.
2023.08
구독 인증기관 무료, 개인회원 유료
In this study, we proposed a simulator for the development of a digital multi-process welding machine and a welding process monitoring system. The simulator, which mimics the data generation process of the welding machine, is composed of process control circuit, peripheral device circuit, and wireless communication circuit. Utilizing this simulator, we aimed to develop a welding process monitoring system that can monitor the welding situations of four multi-process welding machines and three processes each, with data transmission through wireless communication. Through the operation of the proposed simulator, sequential digital processing of multi-process welding data and wireless communication were achieved. The welding process monitoring system enabled real-time monitoring and accumulation of the process data. The selection of upper and lower limits for process variables was carried out using a deep neural network based on allowable changes in bead shape, enabling the management of welding quality by applying a process control technique based on the trend of received data.
4,000원
28.
2023.08
구독 인증기관 무료, 개인회원 유료
The CMM is the most widely used measuring device in the field. The three-dimensional measurement method is divided into a method of scanning the shape of a product and a touch method. In this study, the accuracy of the dimension and shape of each measurement point touch method was analyzed based on the measured value with the touch method CMM using the inner and outer diameter measurement specimens. Through the experimental results, it was possible to obtain the closest value to the true value at more than 30 measurement points.
4,000원
29.
2023.08
구독 인증기관 무료, 개인회원 유료
In a self-level riser, the piston rod generates hydraulic pressure while reciprocating along the pump rod, so components such as rods and valves require precise processing technology. Among them, the design of the pump rod was changed to a spiral groove method because there was a risk of poor operation during eccentricity. In this paper, the design and 3D modeling of the pump rod were conducted, and the structural stability of the core part according to the load change applied to the pump rod was confirmed.
4,000원
30.
2023.08
구독 인증기관 무료, 개인회원 유료
LNG propulsion ships are actively being built as an eco-friendly fuel for ships, and ships with C-type LNG tanks are being widely built. In order to analyze the risk of LNG venting from operating ships and test-run ships, the flow characteristics according to operating conditions were reviewed using ANSYS FLUENT, a computational fluid dynamics (CFD) software. As a result of the study, it was confirmed that the distribution area exceeding the lower explosion limit of natural gas and the area where the natural gas temperature rose to 17 ° C had similarities. In addition, it was confirmed that the change in the horizontal direction was greater than the change in the vertical direction when the natural gas distribution range was changed. Since the valve opening has a greater effect than the tank pressure, if natural gas must be vented to the atmosphere inevitably, the risk can be reduced by operating the valve opening at 50% or less.
4,000원
1
2
