검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 268

        221.
        2013.04 서비스 종료(열람 제한)
        In this study, we aimed to consider the inspection without destroying the specimen using the Impact Echo Method of nondestructive test using stress wave in an objective manner for detecting defects in concrete members. As a result of estimating the thickness of the concrete slab member using Impact Echo Method under the influence of the result of the stress wave, the average error in the 7.49% confirmed the applicability. In addition, we can check the possibility of data acquisition and construction of concrete structures for the construction of the diagnosis system
        222.
        2013.04 서비스 종료(열람 제한)
        In this study, I tried to derive the expression intensity estimation through analyzing the correlation between wave velocity and compressive strength of high-strength concrete and normal-strength one, using ultrasonic pulse velocity which is one of the non-destructive tests which do not damage the structure. By producing a material age strength and body separate experiment which is applied to the ultrasonic pulse velocity, we have derived the estimating compressive strength such as a formula strength of normal-strength concrete : Fc=0.0841vp3.6018, R2=0.82 high strength concrete : Fc=0.0008vp6.9287, R2=0.88. As a result of this verification experiment, the estimated error rate of the compressive strength of normal strength concrete is 16.32%, in the case of high-strength concrete is now 7.58 percent.
        223.
        2013.04 서비스 종료(열람 제한)
        Part of the domestic construction practice and non-destructive inspection technology world level is often inadequate to provide the test results to serve as a basis for evaluating the safety of the structure. Therefore, in this study, is intended to provide basic data for legislation nondestructive inspection in Japan, estimates the size of the column using a technique reverberation impact manufactured column member or this purpose. 3% maximum error rate, the result was 1% minimum error rate. The average error rate is 1.6%, revealed as well as the size of the columns that have been measured
        224.
        2013.03 KCI 등재 서비스 종료(열람 제한)
        ‘소청2호’는 녹색 자엽의 검정콩으로 내재해성이 우수하고 가공용에 적합한 신품종육성을 목표로 숙기가 매우 늦은 대립 검정콩인 ‘밀양78호’와 소립 내재해 도입종인 ‘Peking’을 1996년 인공교배한 YS1262 조합으로 계통육종법으로 선발하였고 계통명은 ‘밀양182호’이다. 꽃은 백색이고 자엽색은 녹색이며, 입형은 장타원형이며 성숙기가 지나면 협의 개열에는 약하다. 성숙기는 10월 2일로 ‘청자콩’과 같이 다소 빠른 품종이며, 경장은 56 cm로 ‘청자콩’보다 10 cm 짧고 100립의 무게는 12.2 g인 소립인 품종이다. 도복에 강하며 포장 재배시험에서 콩모자이크 바이러스병은 다소 발생하였고, 불마름병에 대한 유묘 접종 및 포장반응은 ‘청자콩’과 비슷하나 약한 편이다. 종실성분으로 조단백 함량은 38.8%로 ‘청자콩’보다 다소 낮았고, 종실의 아이소플라본 함량은 2,031㎍/g으로 ‘청자콩’보다 높았다. 청국장 가공적성에서 ‘일품검정콩’보다 발효 정도는 다소 낮으나, 청국장 수율 및 풍취에서 우하였다. ‘소청2호’의 중남부지역 5개소의 평균 수량성은 ha당 2.00톤으로 ‘청자콩’ 대비 7% 증수하였다.
        225.
        2013.03 KCI 등재 서비스 종료(열람 제한)
        ‘대하 1호’는 대립 내재해 다수성 콩 신품종육성을 목표로, 내재해 다수성 ‘장엽콩’을 모본으로 대립 ‘화엄풋콩’을 부본으로 하여 교배한 것을 다시 다수성 ‘수원192호’를 모본으로 1997년도에 인공교배한 SS97214 조합으로 계통육성법으로 선발하였으며 계통명은 ‘밀양164호’이다. 꽃색은 백색이고 잎모양은 난형이며, 종자모양은 구형이고 종피색과 배꼽색은 황색이며 100립중은 25.4 g으로 ‘태광콩’에 비하여 2.5 g 정도 무거운 대립이다. ‘태광콩’보다 성숙기가 늦어 등숙기간이 2일이 길다. 도복에 강하며, 불마름병과 바이러스에 강하고, 내습성과 뿌리썩음병, 종실의 이병립율은 ‘태광콩’과 비슷하다. ‘태광콩’ 대비 수량성은 생산력검정시험에서 8 %, 지역적응시험에서는 5 % 증수하였으며, 전국 10개소 평균 종실수량은 ha당 2.62톤이다.
        226.
        2012.11 서비스 종료(열람 제한)
        In this study, specimens were produced to reach design standard strengths 40, 50 and 60MPa on age 28 days to evaluate the usability of high strength recycled aggregate concrete and the applicability of compressive strength by Impact Echo method and numerical analysis, and after 0, 30, 50 and 100% recycled coarse aggregates were substituted and mixed into each combination, totally 12 combinations were set. And, through compressive strength test, Impact Echo method, shock reverberation technique and numerical analysis on 1, 3, 7 and 28 days of age
        227.
        2012.11 서비스 종료(열람 제한)
        An efficient and practical reliability analysis method is required for the development of reliability-based design (RBD) guidelines of coastal structures. Such a novel method is presented in this paper. It is capable of evaluating reliability of real complicated coastal structures considering uncertainties in various sources of design parameters. It is developed by intelligently integrating the Latin hypercube sampling (LHS) method and the finite element method (FEM). The applicability and efficiency of the proposed method are verified using a caisson-type quay wall. in the numerical example.
        228.
        2012.11 서비스 종료(열람 제한)
        The purpose of this study is to develop structral technologies on the lightweight composite slab systems with sound reduction layers in the modular house. In this study, two kinds of slabs with minimum thickness was suggested reducing the floor impact sound. In order to evaluate the structural performance, the flexural strenth tests were carried out on the one-way full scale specimens. From the results of test, we know that the proposed slabs had ductile behavior and would be safe sufficiently.
        229.
        2012.04 KCI 등재 서비스 종료(열람 제한)
        In this study, to develop hair growth agents using natural products which has excellent ability to promote hair growth effect and fewer side effect, animal experiment and clinical trials was performed to evaluate hair growth promotion effect of herbal product containing Rosa mutiflora roots extracts as a main component (RMHP). 4-week-old male C57BL/6 mice were removed the dorsal hair using thioglycolate, and applied 15% EtOH solution as a negative control, 5% minoxidil as a positive control and RMHP to dorsal skin. In the results of macroscopy and photo-interpretation, RMHP group recorded 100% (+++++) of hair growth was proved to significantly stimulate hair growth against 80% (++++) negative control group. 37 patients were treated with RMHP and evaluated the therapeutic effect at 16 weeks. Hair density was significantly increased at 16 weeks after applying RMHP (125.0±4.9 FU/cm2) compared to before treatment (104.3±4.7 FU/cm2, p 〈 0.05), and hair thickness were also significantly increased (0.066±0.003 mm) than before treatment (0.055±0.002 mm, p 〈 0.05). The result of clinical photo-interpretation using 7-point rating scale assessment, after 16 weeks clinical symptoms were evaluated to significantly improve with 1.23±0.05 (p 〈 0.05). Therefore, the results of this study were observed that RMHP have hair loss prevention effect and hair growth promotion effect to hair loss patients.
        230.
        2011.12 KCI 등재 서비스 종료(열람 제한)
        2006~2007년까지 2개년에 걸쳐 전국 8개도 27개 지역 28개 시험구에서 재배한 시료를 바탕으로 등숙기 온도가 벼의 등숙형질에 미치는 영향을 분석하고 식미치 향상에 적합한 등숙온도를 추적한 결과는 다음과 같다. 1. 출수기~출수 후 30일까지의 평균기온이 출수 후 40일까지의 평균기온 보다 벼의 등숙정도를 나타내는 현미 천립중과 식미치 변이를 더 잘 설명할 수 있었다. 2. 시험에 사용된 중만생종 벼 품종들은 출수기~출수 후 30일까지의 평균기온이 21℃ 이하일 경우에는 저온으로 등숙이 불량하였고 22℃ 전후에서 현미천립중이 최고를 나타내었으며 그 이상의 온도에서는 온도가 올라갈수록 현미천립중이 감소하였다. 3. 현미천립중이 최대가 되는 출수기~출수 후 30일까지 평균기온은 22.2℃ , 식미치가 가장 높았던 평균기온도 22.2℃ 로 같은 경향을 나타내었다. 4. 출수기~출수 후 30일까지 평균기온이 증가할수록 현미단백질 함량은 증가하였고 현미천립중이 증가할수록 현미단백질 함량은 감소하였으며, 현미천립중이 증가하면 식미치가 증가하였고 현미단백질이 증가하면 식미치가 감소하였다. 5. 식미치가 최고를 나타내는 출수기~출수 후 30일까지의 평균기온은 남평벼에서 22.1℃ , 일품벼와 주남벼에서는 22.5℃ 였지만 동진1호는 23.1℃ 로 다소 높았다. 6. 출수기~출수 후 30일까지 평균기온이 21℃ 이상인 경우 온도가 높아질수록 현미단백질 함량은 유의하게 증가하였고, 현미천립중과 현미단백질 함량과의 관계는 부의 유의성을 나타내었다. 7. 식미치는 현미천립중과 정의 유의성을 보였고 현미단백질 함량과는 부의 유의성을 나타내었다.
        231.
        2011.12 KCI 등재 서비스 종료(열람 제한)
        경 X선 형광분석 기법에 사용되는 X선 튜브는 X선의 휘도가 낮아 분석의 정밀도가 떨어지고 분석 시간 또한 오래 걸린다. 모세관 집광소자를 이용하면 X선 휘도의 이득(gain)을 최소 10 이상 얻을 수가 있다. 모세관 광학소자는 8.4keV의 텅스텐 특성방사선을 효율적으로 집광할 수 있도록 설계되었다. 파이렉스 유리로 된 모세관 모재를 풀러 (puller)를 이용하여 45 g의 추에 650˚의 온도를 가하여 모세관 광학소자를 제작하였다. 모세관 광학소자의 제작은 총 460분이 소요되었으며 제작된 모세관 광학소자의 길이는 87 mm, X선 입사부의 직경은 300 ㎛, 출구부의 직경은 192 ㎛로 제작되었다. 제작된 모세관 광학소자를 경 X선 형광분석에 적용하면 황(S)과 같은 경원소 검출의 정밀도를 높일 수 있을 것이다.
        232.
        2011.06 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        자색 고구마로부터 페놀성 화합물 추출 최적 조건은 50% 에탄올로 12시간 추출하였을 때 최대 용출량을 나타내었다. 불과 50% 에탄올을 용매로 하여 제조한 자색 고구마 종류별 추출물의 항산화 활성 측정 결과 전자공여능, ABTS, PF 측정에서 일반 고구마에 비하여 자색 고구마 자미, 신자미, 연자미 품종 모두 높게 나타났으며, TBARs 측정결과 모든 추출물에서 30% 이하로 낮은 TBARs 생성 억제활성을 나타내었다. 피부상재균에 대한 최소
        233.
        2011.06 KCI 등재 서비스 종료(열람 제한)
        X선에 대한 피폭을 최소화 하려는 앞치마는 차폐 성능이 좋지 않으면 방사선 작업종사자나 환자에게 불필요한 피폭 을 줄 수 있으며 나아가 방사선 만성 장해를 유발시키기도 한다. 이를 방지하기 위하여 제조사에서는 0.25mm이상의 납 당량을 가진 앞치마을 제작한다. 본 논문에서는 앞치마을 제조사별, 납 당량별로 분류하여 차폐성능을 측정, 우수한 앞치마를 구비하는데 기초자료를 제공하고 성능 평가 방법의 접근을 용이하게 하고자 한다. 0.05mm의 Pb과 4개의 제조사(H, X, I, J)에서 제작된 앞치마을 3종류의 납 당량별(0.50mmPb, 0.35mmPb, 0.25mmPb)로 분류하고 Apron은 크게 Clavicle part, Chest part, Abdomen part, Pelvis part로 구분하여 투시촬영장 치를 이용, 방사선 투과율, 차폐율과 표준편차를 측정하였다. 0.5mmPb 앞치마의 방사선투과율과 차폐율을 측정한 결과 I사의 앞치마가 가장 우수한 97.96%의 차폐율을 보였으 며, J사의 앞치마는 96.25%의 차폐율을 보이며 가장 저조하였다. 0.35mmPb 앞치마의 경우 I사의 Apron이 96.79%의 가장 우수한 차폐율을 보였으며 A사의 앞치마는 가장 저조한 95.81%의 차폐율을 보였다. 0.25mmPb 앞치마의 경우 X사의 앞치마가 가장 우수한 90.91%의 차폐율을 보였으며 H사의 앞치마는 가장 저조한 88.82%의 차폐율을 나타냈 다. 또한 0.5mm 납을 함유한 앞치마의 차페율에 대한 표준편차는 X사(0.125)와 I사(0.190)가 가장 낮게 나타났고 J사 (0.447)가 가장 높게 나타났으며, 0.35mm 납을 함유한 앞치마는 I사(0.231)가 가장 낮았다. 0.25mm 납을 함유한 앞 치마는 X사(0.364)로 다른 제조업체의 앞치마보다 표준편차가 가장 작았다. 일정한 납 당량이 함유된 앞치마는 지금까지 방사선으로부터 피폭을 방지하는 보편적이며 일반적인 보호 장구이다. 그러므로 환자, 보호자 또는 방사선 관련 작업종사자는 방사선 피폭을 최대한 방지하기 위하여 양질의 앞치마를 사용 하여야 할 것이며 이러한 실험적인 방법을 통하여 객관적이며 현실적인 차폐율을 평가해야 할 것이다.
        234.
        2010.12 KCI 등재 서비스 종료(열람 제한)
        1. 신육형은 유한신육형, 화색은 자색, 엽형은 환형이다. 모용 및 성숙기의 협은 갈색이며 종피색과 제색은 흑색이고 종실 자엽색은 황색이다. 입형은 장형으로 성숙기가 지나면 협의 자연개열이 다소 나타난다. 2. 성숙기는 10월 3일로 ‘일품’ 검정콩보다 4일 늦으며, 경장은 54 cm로 4 cm 길고, 100립중은 29.2 g으로 ‘일품’ 검정콩 보다 1.6 g 무겁다. 3. 도복에 비교적 강하며, 포장 재배기간중의 모자이크 바이러스병은 다소 발생하였으
        235.
        2010.12 KCI 등재 서비스 종료(열람 제한)
        This study is to make value estimating system to valuate prototype landscape of rural and to derive itemized importance to select priority preservable object The results of the study are summarized as follows, It is examined value estimating standard by analyzing prototype landscape related previous study, law and order. Also, It is derived conclusive prototype landscape value estimating system by doing attribute assessment of preserving objects while surveying the site and interviewing professionals, Value estimating system is classified into five items of physical value which are integration, harmony, diversity, symbolism and aesthetics, The historical-cultural value are divided into four categories which are religious value, originality, historicity and scarcity, The communal values are divided into three categories which are sociality, continuing and regional locality and also divided into three categories which are rarity, primitiveness and diversity as the ecological value, Relative priority of prototype landscape value estimating system result is derived as historical-cultural value as the superior position and physical value, communal value and ecological value as the priority order. In the subordinate, historical categories are derived to be the most valuable and originality, symbolism, integration, regional locality, continuing, harmony, aesthetics, religious value, primitiveness, diversity of physical values and diversity of ecological value in order of the priority assessment The results of the study have the meaning of practical use in prior selection and preservation plan of preserving prototype landscape as practical alternative plan for systematical preservation of damaging prototype landscape.
        236.
        2010.06 KCI 등재 서비스 종료(열람 제한)
        ‘대흑’은 밥밑용 특성이 우수한 단경 내재해 다수성 신품종 육성을 목표로 대립 장류용 품종인 대황콩과 단경 내도복 내재해 다수성 계통인 밀양 79호를 1997년 인공교배하여 계통 육종법으로 선발한 YS1298-2B-20-5-1-1-1 계통이다. 계통명은 ‘밀양158호’이고 품종등록번호는 No. 3009이며 주요특성은 다음과 같다. 1. ‘대흑’의 신육형은 유한신육형이며 화색은 자색이고 엽형은 환형이다. 모용 및 성숙기의 협은 갈색이며 종피색과 제색은 흑
        237.
        2010.03 KCI 등재 서비스 종료(열람 제한)
        단옥수수로부터 찰옥수수로 변한 소비자들의 기호성과 홍수출하를 피하고 생산자의 소득을 높이기 위한 주년공급에 대응하기 위해서 조생종과 만생종 찰옥수수의 육묘와 이식재배에 관한 체계적인 연구가 필요한 현실이다. 본 연구는 2007년에 국립식량과학원 시험포장에서 찰옥수수의 조생종 품종 찰옥 1호와 만생종 품종 찰옥 4호를 재료로 하여 풋옥수수의 안정성 높은 이식재배법에 대한 일련의 실험을 수행한 것으로 그 결과를 요약하면 다음과 같다. 1. 육묘기간이 길어질수록 파종 후의 출사일수가 길어지는 반면, 이식후의 출사일수는 짧았는데, 출사일수는 찰옥 1호가 찰옥 4호에 비하여 9~12일, 그리고 2기작이 1기작에 비하여 12~15일 정도 짧았다. 2. 육묘 이식재배한 찰옥수수의 간장은 육묘일수가 길수록 감소하는 경향이었으며, 직파재배에서 간장은 2기작재배에서 1기작재배에 비하여 찰옥 1호는 17%, 그리고 찰옥 4호는 24% 감소하였다. 3. 이삭길이는 육묘일수가 길어질수록 다소 감소하였는데, 찰옥 1호는 1기작재배에 비하여 2기작재배에서 크게 감소하였다. 4. 상품 이삭수는 직파재배에서 2기작재배가 1기작재배에 비하여 찰옥 1호는 64% 감수하였고, 찰옥 4호는 12%로 감소하여 그 정도가 적었다. 5. 상품 이삭수로 보아 찰옥수수의 적정육묘일수는 찰옥1호는 1기작재배 15일 육묘, 2기작재배는 이식재배 보다 직파재배가 적당하고, 찰옥4호는 모든 작기에서 20일 육묘로 판단되었다.
        238.
        2009.12 KCI 등재 서비스 종료(열람 제한)
        본 연구는 2007년 국립식량과학원 시험포장에서 찰옥수수의 조생종 품종 찰옥 1호와 만생종 품종 찰옥 4호를 재료로 하여, 적정육묘 일수, 충실한 묘를 육성하기 위한 플러그셀 크기에 대한 일련의 실험을 수행한 것으로 그 결과를 요약하면 다음과 같았다. 1. 찰옥수수 묘의 묘장, 엽수 및 건물중은 파종기와 플러그셀 크기에 따라서 고도로 유의한 차이가 있었으나, 품종간에는 차이가 없었는데. 찰옥수수의 묘는 3월 파종 보다 5월과 7월 파종에서 생장속도가 빨랐다. 2. 찰옥수수 묘의 묘장과 엽수는 육묘일수가 길수록 증가하였는데, 3월 14일 파종에서는 30일 묘(21.6 cm), 5월 8일 파종에서는 15일 묘(25.5~26.9 cm), 그리고 7월 3일 파종에서는 10일 묘(21.6~24.0 cm)에서 이식에 적합한 묘장이 되었으며, 엽수는 3월 14일 파종에서는 파종 후 15~20일, 그리고 5월 8일과 7월 3일 파종에서는 파종 후 10일에 이식에 적합한 2~3매가 되었다. 3. 건물중도 육묘일수가 길어질수록 증가하였는데, 3월 14일 파종에서는 육묘 30일에 0.43g, 5월 8일 파종은 20일에 0.57~0.67g, 7월 3일 파종은 15일에 0.53g이었고, 또한 육묘일수가 길어질수록 건물중 증가속도가 2~3배 빨라졌다. 4. 묘장과 엽수로 보아 찰옥수수의 적정육묘일수는 모든 플러그셀 크기에서 3월14일 파종에서는 20일, 그리고 5월과 7월 파종에서는 10~15일이었다. 5. 찰옥수수 플러그묘의 묘장, 엽수, 엽면적 및 건물중 간에는 높은 정의 상관이 있었으나, 엽색도는 대부분의 형질과 부의 상관을 보였다.
        239.
        2009.12 KCI 등재 서비스 종료(열람 제한)
        This study is aimed at the necessity application in 'Prototype' general concept on discovering cultural identity landscape of our national characteristics landscape research. Accordingly, It is considered landscape, fundamental concept, the prototypal landscape concept from previously researches that have been used. At the same time, the concept of prototypal landscape has been established by commenting a point of view which is defining previous researches that controverted prototypal landscape, then establish concept of prototypal landscape and derive attribute by comparing and considering similar terminology of prototypal landscape. Previously, research prototypal landscape in depth by applying defined concept of prototypal landscape and considering inherence ideological and environmental background prototypal figure and structure. Formation pattern of the prototypal landscape is classified in both philosophical formative primary factor from philosophy, religion and environmental formative factor of human that accumulated cultural life from a region and life. Examples of forming the prototypal landscape by philosophical formative factor are classified as 'Feng-Shui(the theory of divination based on topography)', 'Yin-Yang theory', 'Confucian idea theory' 'Philosophical Taoism', 'Buddhism theory' and 'Nature theory' then environmental formative factor are interpreted by 'Taekliji(determining of advantageous land)', 'Imwon(forest) economical geography', 'land use', 'topography' and 'terrain' as examples. This study is anticipating a new point of view and an establishment of reliable preservation to our characteristic of the prototypal landscape by considering concept of prototypal landscape and formative factor as studying limits of prototypal landscape and researching concentrated origination of the prototype.
        11 12 13 14