검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 291

        41.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 분쇄효율 향상과 더불어 최근 대두되고 있는 시멘트의 품질 문제 해결을 위하여 기능성 분쇄 조제 TIPA계의 대체 를 위해 Glycerine-co-MEA의 유기고분자를 합성하고 이를 적용하여 시멘트 클링커의 분쇄효율 및 압축 강도 향상을 기하고자 하였다. 시 멘트 클링커의 분쇄 효율 및 제조된 시멘트의 물리적 특성을 향상시키기 위하여 고분자 구조 내에 분쇄능을 향상시킬 수 있는 하이드록 실기(-OH)와 압축강도를 향상시키는 아민기(-NHx)를 동시에 가지는 유기 고분자를 합성하고 이를 적용한 시멘트의 분쇄능, 강도발현율 및 유동성 등 시멘트의 물리적 특성을 검토하였다. 실험결과 Glycerine-co-MEA의 최적 합성 조건은 몰비 1 : 1, 반응온도 80℃, pH 5.0, 점도 35 cPs일 때 가장 안정한 고분자의 합성이 가능 한 것으로 나타났으며, 분쇄능은 기존 DEG 및 TIPA계 보다 분말도는 약 150~310 ㎠/g 증가하였고, 45 ㎛체 잔사율은 1.6~2.0% 정도 감소 하여 분쇄효율이 향상되는 것으로 나타났다. 압축강도는 알카놀 아민계 유기 고분자의 하이드록실기에 의한 분쇄능 증진 및 아민기에 의한 시멘트 초기 강도 증진 현상으로 초기 재령 1일에서 DEG보다 약 31%, 기능성 분쇄조제인 TIPA계 보다 약 12%의 높은 강도 증진을 나타내었으며, 재령 28일에서는 DEG보다 19%, TIPA계 보다 약 12%의 강도 증진 결과를 나타내었다.
        4,000원
        43.
        2019.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aims to investigate the physical properties of extruded psyllium husk upon the addition of emulsifiers. Three different emulsifiers−glycerol monostearate (GMS), polyglycerol ester (PGE), and sugar ester (SE)−were added to the mixture of psyllium husk and rice powder before extrusion. Extrusion was performed using a twinscrew extruder at 140°C die temperature, 200 rpm screw speed, and 16% feed moisture content. The physical properties of psyllium husk extrudates including expansion ratio, specific length, piece density, texture profile, color properties, water soluble index, and water absorption index were evaluated. It was observed that the expansion ratio was the highest while the specific length and piece density were the lowest in the control which had no emulsifiers. Texture profile analysis showed that the apparent elastic modulus and breaking strength were highest in the extrudate with a PGE of 0.1%. The adhesiveness was found to be lowest in the extrudates with an SE of 0.1% and GMS of 0.5%. Lightness value was highest in the extrudate with a PGE of 0.1%. Color difference, water soluble index, and water absorption index were highest in the control. The results reveal that some physical properties of extruded psyllium husk were improved with the addition of emulsifiers. This finding provides useful information for the development of psyllium snacks with good physical characteristics.
        4,000원
        44.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        높은 함수율을 갖는 소프트렌즈를 제조하기 위하여 아크릴계 공중합체를 설계, 제조하였다. 공중합체용 모노머로 2-hydroxyethyl methacrylate(HEMA)를 사용하였고 가교제로는 ethylene glycol dimethacrylate(EGDMA), glycerol dimethacrylate(GD) 혹은 glycerol 1,3-diglycerolate diacrylate (GDD)를 이용하여 렌즈를 제조하였다. 함수율 측정결과, 고함수율 렌즈는 기존의 36%에서 46%로 높 게 나타났으며 접촉각도 38.6 에서 34.4로 낮아져 표면 친수성이 높게 나타남을 확인하였다. 인장강도는 가교제의 친수성이 증가함에 따라 0.1MPa 에서 0.08 그리고 0.05 로 감소하였고 전자현미경으로 렌즈의 단면을 확인한 결과 상분리 현상은 나타나지 않았다. 광중합은 Real-time infrared(RTIR)로 측정하였는데 초기 중합 속도가 가교제에 따라 0.6 에서 0.9 로 나타났다.
        4,000원
        46.
        2019.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Along with industrial development, various architectural structures have become bigger and higher, leading to an expansion in the size and capacity of construction equipment. And with the development of public transportation, the use of subways as a means of transportation in the city center is increasing, so that vibrations and structural noises are emerging as a new environmental issue. Considering that architectural structures may be used from several decades to hundreds of years after the time of construction, they can be seen as semi-permanent. Due to changes in the vibration-proof polyurethane mats installed in the foundation of these structures, settling may occur and vibration reduction may become inadequate. Therefore, in view of service life, it is necessary to have a high-level standard of reliability and stability. In accordance with this, the Floating Floor System, which uses soft polyurethane foam and can be constructed within a relatively short period of time, has excellent vibration resistant characteristics. It is presented as a great alternative solution to the issue of vibrations caused by subways, railways and building structures. At present, vibration-proof polyurethane mats have been developed up to the same product level as in other advanced countries. However, in the construction of structure foundations, the physical properties of this product and its shape incur changes. If they are installed as such in the structure of a building, it may cause significant impact on stability, requiring that this cause be urgently identified and improved.
        4,000원
        47.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 미국 남캘리포니아 지진센터에서 개발한 물리적 지진모델링 기반 광대역 강지진동 모사 플랫폼( 버전 16.5)을 활용하여, 규모 6.0, 6.5, 7.0 지진에 대한 진도 감쇠 특성 분석을 수행하였다. 지진 발생 위치는 2016년 규모 5.8 경주 지진 진앙 인근을 가정하였으나 지각 전파 모델의 경우 남캘리포니아 강지진동 모사 플랫폼에서 제공하 는 미국의 대표적인 지각 모델 두 개를 사용하였다. 하나는 판 내부를 대표하는 미국 중동부 지역(Central and Eastern United States, CEUS) 모델이고 다른 하나는 판의 경계를 대표하는 미 서부 지역(LA Basin) 모델이다. 버전 16.5 플랫 폼에는 5개의 모델링 방법론이 제시되고 있으며 본 연구에서는 Song 모델과 Exsim 모델을 사용하였다. 동일 규모의 지진이라 하더라도 지진발생 환경이 다른 지역(CEUS vs LA Basin)에서는 같은 진앙 거리에서 진도 2 등급에 가까운 차이가 발생할 수 있음을 본 연구를 통해서 발견하였다. 본 연구에서 나타난 지역별 진도 감쇠 특성의 차이를 감안할 때 한반도에서 좀 더 정밀한 지진재해 평가를 위해서는 지역에 적합한 진도 감쇠 특성을 이해하는 것이 중요할 것으로 판단되며 본 연구는 지역 특화된 진도 감쇠 특성을 고려하지 않을 경우 진도 감쇠 분포의 불확실성 정도를 잘 보여준다.
        4,300원
        48.
        2018.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The effects of chemical compositions (protein, lipid, and dietary fiber) on the physical properties of dried biji powders were investigated. The raw biji was freeze-dried (control) and hot-air dried (untreated). The untreated biji was further defatted and deproteinated. The prepared biji powders were analyzed for the proximate composition, total dietary fiber (TDF), water absorption index (WAI), water solubility index (WSI), swelling power, solubility (including the quantification of soluble carbohydrate and protein fractions), and final viscosity (using a rapid visco analyzer). Control and untreated biji powders exhibited the similar chemical compositions. The defatted biji possessed higher TDF, although its protein content did not significantly differ for control and untreated ones. The deproteinated biji consisted mainly of TDF. WAI and swelling power increased in the order: deproteinated > defatted > control > untreated biji powders. WSI and solubility increased in the order: control > untreated > defatted > deproteinated biji powders. The similar patterns were observed for soluble carbohydrate and protein fractions. The deproteinated biji revealed the highest viscosity over applied temperatures, while the untreated one was lowest. Overall results suggested that the physical properties of the dried biji powder were reduced by protein and fat, but enhanced by dietary fiber.
        4,000원
        49.
        2018.11 구독 인증기관 무료, 개인회원 유료
        Accompanied with the industrial development, and enlarging and heightening buildings, building equipments are also enlarging. These changes are serious to the cause of structure noises. The Floating Floor System which uses the soft foam polyurethane are becoming popular in construction areas for its short construction period and well vibration proof ability, hence it is becoming wide in the marketing volume. We were able to enhance the physical characteristics of the vibration proof polyurethane mat with this study. As a result, we were also able to secure material competitiveness by meeting the requirements of customer satisfaction through enhancement in estimated material lifetime and physical characteristics.
        4,000원
        51.
        2018.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        재가열에 따른 쌀의 품종별 물리적 특성을 관찰하기 위하여 고품질 밥쌀용으로 개발된 쌀(다보, 대보, 삼광, 수광, 신동진, 진수미, 하이아미)을 취반 후, 24시간 냉장, 냉장 후 재가열에 따른 물리적 특성을 분석하였다. 텐시프레셔를 이용한 품종별 식감특성을 분석한 결과, 경도는 삼광이 가장 낮았으며, 대보, 하이아미가 가장 높았다. 부착성, 탄력성, 찰기는 신동진이 가장 낮았다. 품종에 따라 밥을 취반한 다음 취반 직후, 취반 후 24시간 냉장보관, 냉장보관 후의 색도, 물성, 미세구조를 관찰하였다. 색도 분석결과, 취반 후 냉장 및 재가열에 의해 밥의 명도가 떨어지는 경향을 보였다. 취반한 후의 물성 분석 결과, 하이아미가 다른 품종에 비해 모든 항목에서 가장 높은 값을 보였다. 취반한 후 24시간 냉장 보관하였을 때는 경도, 점착성 및 씹힘성이 증가하였으며, 재가열에 의해 그 값은 다시 감소하였다. 주사전자현미경을 이용하여 밥의 미세구조를 관찰한 결과, 하이아미의 경우 취반 직후에 중앙부분의 입자가 치밀하게 뭉쳐 있음을 확인할 수 있었다. 냉장 저장 및 냉장 후 재가열에 의해 모든 품종에서 기공이 조금 더 명확하게 형성된 것을 확인하였다. 본 연구결과를 종합하여 볼 때, 벼 품종 특성에 따라 취반 후 재가열 및 보관에 따라 물리적 품질 특성이 달라지는 것으로 확인되었다. 추후 본 연구결과를 기초로 하여 취반 후 재가열 및 보관에 따른 이화학적 및 관능적 품질 분석 등과 같은 후속 연구를 통해 고품질 밥쌀용으로 개발된 쌀이 산업적 이용을 위한 응용연구가 지속적으로 수행되어야 한다고 판단된다.
        4,000원
        52.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        인삼과립차의 편의성 및 기호성 증진을 위해 부형제인 젖당, 포도당 및 아라비안 검의 첨가량에 따른 과립차의 물리적 특성을 분석하였다. 젖당의 첨가량이 증가할수록, 포도당의 첨가량이 감소할수록 흡습성은 낮아지고 용해성은 증가하는 경향을 보였다. 사포닌 용출량은 첨가되는 부형제의 종류 및 양에 영향을 받기 보다는 인삼농축액의 첨가량에 더 큰 영향을 받는 것으로 나타났다. 아라비아 검의 첨가량이 증가할수록 흡습성, 용해성은 증가하는 경향을 보였고, 색도는 큰 차이점이 없었다. 부형제 첨가에 따른 인삼 과립차의 최적 배합비는 인삼농축액 10%, 젖당 80%, 글루코즈 5% 그리고 아라비아 검의 함량이 5% 이었다.
        4,300원
        53.
        2018.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 작업기의 디스크 헤로우를 이송장치에 부착하여 실내실험을 통해 토양의 물리적 특성(함수율, 단위중량), 작업기의 특성(주행속도, 디스크 헤로우 간의 간격)에 따른 경운 토양의 반전율 등을 분석하고자 하며, 작업시기의 적정 토양의 물리적 상태를 확인하여 농가의 기초자료로 활용하고자 한다. 실험은 4가지 변수를 두고 진행하였다. 함수율, 작업 속도는 3가지 조건으로, 단위 중량은 일반적인 밭 흙 단위 중량 2.3kg/m3을 기준으로 높을 때와 낮을 때로 구분 지었으며, 디스크 헤로우의 간격은 30cm, 40cm로 구분하여 실험을 진행하였다. 이러한 4가지 변수를 두고 실험을 실시할 때 똑같은 조건으로 산포하기 위해 1m x 1m 면적의 프레임을 제작하여 일정하게 3회 석회가루를 산포하고, 경운작업 전․후의 석회가루 분포를 측정하여 반전율을 계산하였다. 반전율은 함수율별 분석 시 25%, 15%, 30% 순으로 측정되었고, 디스크 헤로우의 간격은 30cm 일 때가 더 높게 측정되었으며, 토양의 단위중량은 2.3kg/m3 이상일 때 더 높게 측정되었다.
        4,000원
        54.
        2018.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS: Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS: The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.
        4,000원
        55.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        코팅, 발수 및 접착특성이 우수한 불소함유 아크릴계 공중합체를 설계, 제조하였다. 공중합체용 모노머로 methyl methacrylate(MMA), 2,2,2-trifluoroethyl acrylate(FMA) 그리고 2-hydroxyethyl methacrylate(HEMA)를 사용하여 괴상 중합 및 유화 중합으로 반응하여 > 95 %이상 고수율로 공중합체를 제조하였다. 1H-NMR로 화학구조를 확인하였고 DSC와 DMA로 물성분석을 한 결과, FMA의 함량이 5 %에서 10 %로 증가함에 따라 유리전이온도는 3 ℃ 감소하였으며 HEMA의 경우에는 감소폭이 2 ~ 8 ℃로 나타났다. Instron 및 TGA를 이용한 분석에서는 FMA 혹은 HEMA 함량이 10 % 증가함에 따라 괴상 및 유화 중합체 모두에서 인장강도는 29 MPa에서 22 MPa로 감소하였고 Td는 200 ℃에서 180 ℃로 감소하는 경향을 나타내었다. 접촉각은 친수성인 HEMA의 함량이 증가함에 따라 상대적으로 감소하였다.
        4,000원
        57.
        2018.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        It is a well known that concrete is strong for compression and weak for tension. For reinforcing the weakness and improving the performance about concrete, various methods are used. Fiber reinforced concrete that is one of them has been investigated in this study. The function of fiber in concrete is to improve the stress strain relation and toughness, crack control. It’s applied from normal strength concrete to ultra-high performance concrete. But it is essential to disperse fiber uniformly and to prevent aggregation of fiber in concrete, in order that fiber reinforced concrete show the sufficient performance. The various properties of fiber affect the essential properties, for instance, length and diameter of fiber, source, etc. So, this study evaluated the ultra-high performance concrete with mixed in composite fiber.
        4,000원
        58.
        2018.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to investigate the antioxidative and physical properties of finger food type rice snacks and pumpkin rice snacks for infants aged 6 to 12 months old. The addition of rice germ did not affect density or porosity, and there was no significant difference when compared with commercial products. The addition of rice germ to the rice snack group did not reduce the longitudinal expansion quality of the rice snack. The WAI of RW and SW values were 9.83 and 8.93, respectively, which were significantly higher than those of other samples (p<0.05). The results of this study show that the addition of rice germ to rice snack resulted in reduced density and porosity of rice snacks and maintenance of a high water absorption index, which are more desirable characteristics for products. The products with rice germ showed significantly higher antioxidative activities among all samples (p<0.05).
        4,000원
        59.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        난대림에서 생육하고 있는 상록활엽수를 자원화하기 위해서 참식나무의 조직적, 물리적, 역학적 특성 을 분석하였다. 조직적 특성은 방사조직의 크기, 너비, 수와 도관의 크기를 관찰하였다. 참식나무의 전 수축률은 접선방향 11.00%, 방사방향 4.64%를 나타내었고 기건수축률은 접선방향 8.00%, 방사방향 2.88%를 나타내었다. 평균연륜폭은 2.93mm, 기건밀도는 0.52g/cm3, 기본밀도는 0.39g/cm3이었다. 휨 강도는 76.97Mpa, 압축강도는 10.97Mpa, 전단강도는 10.13Mpa이었다. 참식나무의 평균연륜폭과 강도 와의 관계는 1% 수준에서 유의성이 인정되는 부의 상관관계가 나타났다. 참식나무는 평균연륜폭의 높은 증가에 반해 강도 감소율은 비교적 낮은 감소를 나타내어 생장률 증가에 따른 강도 감소가 낮아 대경재 의 이용이 경제적이라고 판단된다. 남부지역의 참식나무는 온대에서 난대로 기후가 변화하는 난대 지역 의 산림자원으로 본 목재재질특성 분석결과 유용한 산림자원으로 활용할 수 있을 것으로 생각된다.
        4,000원
        60.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        SiAlON-based ceramics are some of the most typical oxynitride ceramic materials, which can be used as cutting tools for heat-resistant super-alloys (HRSA). SiAlON can be fabricated by using gas-pressure reactive sintering from the raw materials, nitrides and oxides such as Si3N4, AlN, Al2O3, and Yb2O3. In this study, we fabricate Ybm/3Si12-(m+n)Alm+nOnN16-n (m=0.3, n=1.9, 2.3, 2.7) ceramics by using gas-pressure sintering at different sintering temperatures. Then, the densification behavior, phase formation, microstructure, and hardness of the sintered specimens are characterized. We obtain a fully densified specimen with β- SiAlON after gas-pressure sintering at 1820℃ for 90 min. under 10 atm N2 pressure. These SiAlON ceramic materials exhibited hardness values of ~92.9 HRA. The potential of these SiAlON ceramics for cutting tool application is also discussed.
        4,000원
        1 2 3 4 5