간행물
Carbon Letters KCI 등재 Carbon letters
- 발행기관 한국탄소학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1976-4251 (Print)2233-4998 (Online)
- 수록기간 2000 ~ 2024
- 주제분류 자연과학 > 자연과학일반 자연과학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol.33 No.3 (2023년 5월) 25건
21.
2023.05
구독 인증기관 무료, 개인회원 유료
Ammonia is a potential fuel for producing and storing hydrogen, but its usage is constrained by the high cost of the noble metal catalysts to decompose NH3. Utilizing non-precious catalysts to decompose ammonia increases its potential for hydrogen production. In this study, carborundum (SiC)-supported cobalt catalysts were prepared by impregnating Co3O4 nanoparticles (NPs) on SiC support. The catalysts were characterized by high-resolution transmission electron microscope, X-ray photoelectron spectroscopy, temperature programmed reduction, etc. The results show that the large specific surface area of SiC can introduce highly distributed Co3O4 NPs onto the surface. The amount of Co in the catalysts has a significant effect on the catalyst structure, particle size and catalytic performances. Due to the interaction of cobalt species with SiC, the 25Co/SiC catalyst provided the optimal ammonia conversion of 73.2% with a space velocity of 30,000 mL gcat −1 h− 1 at 550 °C, corresponding to the hydrogen production rate of 24.6 mmol H2 gcat −1 min− 1. This research presents an opportunity to develop highly active and cost-effective catalysts for hydrogen production via NH3 decomposition.
4,000원
22.
2023.05
구독 인증기관 무료, 개인회원 유료
Surface free energy is an important parameter in surface and interface properties of fiber reinforced polymer composite. The BET (Brunauer, Emmett, and Teller) surface area and surface energy of the sample can be obtained by Inverse Gas Chromatography (IGC) based on the adsorption principle. In this paper, surface energy of carbon fiber bundle was tested by means of IGC under different conditions to find reliable test parameters. The main parameters involved include length, mass, and packing density of sample, target fractional surface coverage, flow rate, and maximum elution time. It is demonstrated that IGC has the advantages of simple sample preparation, stable test data, high automation, and high sensitivity for carbon fiber. Among all test conditions, packing density and flow rate have the greatest influences on the experimental results. The optimized test parameters are suitable for various kinds of carbon fiber bundles, including polyacrylonitrilebased and pitch-based carbon fibers with different tensile properties and tow sizes. Moreover, IGC can acutely characterize the surface properties of carbon fibers after carbon nanotube modification and heat treatment, which are hard to carry out using contact angle method.
4,300원
23.
2023.05
구독 인증기관 무료, 개인회원 유료
Mass production of high-quality carbon nanotubes (CNTs) remains a challenge, requiring the development of new wetimpregnated catalyst suitable for the catalytic chemical vapor deposition (CCVD) of CNTs in a fluidized bed reactor. For the successful development of a new catalyst, a highly robust system to synthesize CNTs must be established. Here, we systematically investigated the robustness of CNT synthesis by CCVD using a wet-impregnated catalyst. We statistically tested four factors that could potentially affect the robustness of CNT synthesis system, focusing on carbon yield and IG/ID. First, we tested the effect of vacuum baking before CNT growth. F test and CV equality test concluded that vacuum baking recipe did not significantly reduce the variability of the CNT synthesis. Second, we tested the batch-to-batch variation of catalysts. The results of t test and one-way analysis of variance indicate that there is significant difference in carbon yield and IG/ID among catalysts from different batches. Third, we confirmed that there is spatial non-uniformity of wet-impregnated catalysts within a batch when they are produced in large scale. Finally, we developed a multi-step heating recipe to mitigate the temperature overshooting during the CNT synthesis. The multi-step recipe increased the mean of carbon yield, but did not influence the variability of CNT synthesis. We believe that our research can contribute to the establishment of a robust CNT synthesis system and development of new wet-impregnated catalysts.
4,000원
24.
2023.05
구독 인증기관 무료, 개인회원 유료
The rapid synthesis techniques and interesting multidisciplinary applications make carbon nanodots (CNDs) stand out from semiconductor quantum dots. Moreover, CNDs derived from green precursors have gained more importance beyond chemically derived CNDs due to sustainable synthesis opportunities. However, the presence of molecular impurities or intermediates or fluorophores was neglected during the entire process. Herein, we illustrate the sustainable synthesis of CNDs from Hemigraphis alternata plant leaves with extended carbonization procedure (3 and 9 min) along with simultaneous ethylene glycol and diethyl ether solvent treatment method for the successful removal of interfering fluorophores. To unravel the distinction between purified CNDs (P-CNDs) and organic fluorescent carbon nanostructures (org-FCNs), we carried out photophysical, structural, and morphological studies. A quantum yield (QY) of 69 and 42% was observed for crude org-FCNs, and crude P-CNDs; however after purification, QY of 1% and absence of one component from the fluorescent decays curve suggest the removal of fluorophores. Further, HR-TEM and DLS studies showed the quasi-spherical amorphous particles having < 10 nm particle size for P-CNDs. Besides, in vitro biocompatibility investigation and cellular uptake assay (1–100 μg/mL) against the MDA-MB 468 cell lines proves the ≥ 95% cell viability and good internalization for both org-FCNs and P-CNDs. Hence, our study shows the presence of fluorophore impurities in plant-derived CNDs, the removal and resemblance in biocompatibility properties. Hence, this information can be considered during the synthesis and isolation of CNDs. Simple and effective removal of impurities to harvest pure carbon nanodots (CNDs) through solvent-based selective separation method, and revelation of the cocktail flourphores similar to biocompatible blue fluorescent CNDs were studied.
4,900원
25.
2023.05
구독 인증기관 무료, 개인회원 유료
The carbon-containing molecule can be used as an NMR probe to explore the acidic and structural features of various catalytic materials. Thereinto, although mesityl oxide (MO) has been extensively employed to determine the acidity of solution and ionic liquid systems, could it be utilized to characterize the acidic properties of solid acid catalysts? In this work, on the basis of a series of isolated Brønsted and Lewis acid models with varied acid strengths, the adsorption configurations and corresponding 13C chemical shifts of adsorbed MO molecules have been comprehensively studied by means of a theoretical investigation approach. Among them, both the 13C chemical shift difference between β and α carbon atoms (Δδ), and the 13C chemical shift of β carbon atoms (δ13Cβ) in adsorbed MO molecules were explicitly demonstrated to be closely related to the intrinsic acid strength of Brønsted acid sites. These correlations could be utilized to quantitatively scale the Brønsted acid strength of solid acid catalysts. Besides, a moderate relationship was theoretically derived for the relevant 13C NMR parameters and intrinsic Lewis acid strength.
4,000원
1
2
