간행물
Journal of Korean Navigation and Port Reserch KCI 등재 한국항해항만학회지
- 발행기관 한국항해항만학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1598-5725 (Print)2093-8470 (Online)
- 수록기간 1977 ~ 2020
- 주제분류 농수해양 > 해상운송학 농수해양 분류의 다른 간행물
- 십진분류KDC 559DDC 629
권호리스트/논문검색
Vol.24 No.5 (2000년 12월) 10건
1.
2000.12
서비스 종료(열람 제한)
The information technology(IT) development of telecommunication, along with the informationalization over the world, enables the firms to process their inner and outer operations through Electronic Data Interchange (EDI) system. And the concept of logistics has become more important to the enterprises in strategic sense because it had aggrandized itself to more comprehensive and integrative concept. Also the world shipping market is more competitive than any other market. In these environment, to maintain competitve power, shipping firms process operations by Logistics Information system(LIS), And then, reduce the working processes, working time and its costs. So the LIS has become more important in developing our national logistics system and industry. Therefore, this study purposes on empirically analyzing the activation factors of shipping LIS and the relationship these factors with logistic performances in the shipping industry. Considering environments of Shipping logistics information system, this study sets up the research model and hypothesis to examine the activation factors of shipping LIS and the relationship these factors with logistic performances. We used the field data on the 163 numbers of firms(29 overseas shipping companies and 133 forwarding Agency) to get the empirical evidence. According to the study results, The shipping LIS activation factors which the sample firms recognized as important: were top manager's support, well structured communication channel, strategic plan's connection and inner informationalization level. And IS organization ＆ human resources, IS discipline ＆ training, software development, IS organizational alignment, database management system, information standardization, competitive advantage, financial support and government support represent partially significant. Also, the current shipping LIS's main problems are expensive system cost, standardization of working process's, institution's imperfection and system's interaction defect. So these problems must be improved to activate shipping LIS.
2.
2000.12
서비스 종료(열람 제한)
This paper treats a genetic algorithm for ship scheduling problem in set packing formulation. We newly devised a partition based representation of solution and compose initial population using a domain knowledge of problem which results in saving calculation cost. We established replacement strategy which makes each individual not to degenerate during evolutionary process and applied adaptive mutate operator to improve feasibility of individual. If offspring is feasible then an improve operator is applied to increase objective value without loss of feasibility. A computational experiment was carried out with real data and showed a useful result for a large size real world problem.
3.
2000.12
서비스 종료(열람 제한)
The ship’s safe mooring stability is a principles for the safe cargo handling works at the mooring berth. Today numerous standards, guidelines and recommendations concerning mooring practices, fittings and equipments exist throughout the worldwide maritime industries. In recently, the mooring facilities were constructed as dolphin types at the open sea area apart far from shoreside instead of enclosed coastline area in accordance with increasing ship’s size and for preventing environmental pollution. Therefore the exciting wave condition must be considered as a basic environmental criteria with the wind force and current force for all of the mooring ships at the sea berth facilities. In this study, this added wave force as one of the environmental external forces by using the theoretical formula was applied to the LNG ship in Pyeongtaeg harbor needed the special mooring stability of the sea berth. Through this research, it can be confirmed that wave force is the very important factor in the mooring force and the strength of wave force works much more in the full laden condition than in the lightship condition. And also the wave force changes to non-linear states according to the wave frequency and wave length. In addition, the maximum limit criteria of environmental force of prohibiting the entering ship on the berth and loading works controlled by the port authority concerned of Pyeongtaeg port fully satisfies the condition of the mooring limit force recommended by OCIMF that the safe permitted force of the mooring line have to be within 55 % of MBL.
4.
2000.12
서비스 종료(열람 제한)
In the transportation literature, many useful decision making models for ship routing and ship scheduling have been studied. But the majority of these studies are on industrial carriers, bulk carriers, or tankers. It is quite recent that a few optimization models have been developed for liner fleet routing and scheduling problems. However there have been few academic studies on decision making models for the routing or scheduling problems of passenger ships in spite of their economic importance in the entire shipping industry. The purpose of this study is to develop analytic decision making models for ship routing and scheduling for the passenger ship fleet. This study gives two optimization models, one is a linear programming model and the other a goal programming model. These two models are solved easy by commercial linear programming softwares and suggest optimal ship routing plans and many other useful implications for passenger ship fleet managers.
5.
2000.12
서비스 종료(열람 제한)
Since very large and high-speed ships have been appeared in marine transportation from 1970s, these ships with poor maneuverability have made large-scale accidents frequently all over the world. The IMO(International Maritime Organization) recommended that ship designers should evaluate various maneuvering performance at initial stage and serve them to ship operators when they deliver a new ship. Meantime, it is expected that ships with large and wide superstructure would have poor maneuverability when they are affected by strong wind. Therefore, car carrier ship with large superstructure was selected to confirm how the ship responds to the external wind forces in this paper. The lateral and transverse projected areas above the water level were considered and ship behaviors were checked by change of rudder angles under severe wind conditions of different directions. In addition, hydrodynamic derivatives and coefficients were predicted from ship particulars and numerical calculations were carried out with the mathematical model of low speed maneuvering motions.
6.
2000.12
서비스 종료(열람 제한)
DGPS/Radio beacons are currently being planned or installed in many countries. They offer a cost-effective way of distributing differential data to large number of users. These networks are also being deployed in South Korea, Japan, and China. Several DGPS stations among them are operating on the same frequencies. The DGPS signal based on a radio beacon in medium frequency band travels principally as a groundwave over the surface of the earth. The signal may also be received as skywaves at locations beyond about 100 km from the reference station. These skywaves interfere with groundwave signals due to fading. This factor has generally ignored in designing DGPS/Radio beacon systems. A further important factor is to reduce the coverage due to interference from other beacons on the same or adjacent frequencies. The desired signal may fade due to interaction between its skywave and groundwave components. It may degrade the accuracy of the positioning in a complex fashion. This paper estimates the coverage of Far East Asia DGPS stations which are operating on the same frequencies, which is based on the signal protection ratio and interference of the signal strength of the groundwave and skywave.
7.
2000.12
서비스 종료(열람 제한)
The 3rd order intermodulation(IM3) signals affect a great influence on fundamental signal because IM3 can not be rejected by a filter. To solve this problem, in this paper, a predistortion method was applied. The designed predistorter cascaded to 4 W power amplifier and tested with two-tone spreaded 5 MHz. As an experimental result, it was cleary shown that the 3rd order intermodulation distortion characteristics has been improved as much as 17 dB when the output of the power amplifier is 30.67 dB.
8.
2000.12
서비스 종료(열람 제한)
Nowadays LNG has been beginning to take the place of petroleum as fuel all over the world and VLCC of LNG will take the same sea routes that had been used by VLCC tankers of petroleum in the last part of the 20th century. The transportation of LNG by a VLCC include more dangerous nature of sea peril than that of petroleum. We already know the dimensions of a disaster a LNG tanker could bring about in the case of the LNG tanker, Yuyo-Maru No. 10 in the Tokyo Bay of Japan in 1974. From the point of safety when we construct a LNG base or LNG pier in the base, the appropriate government authority and constructing company had better take sea pilots or some ships handling experts to participate in a prior consultation of the design of the project. A G/T 100,000 ton LNG base and pier were completed in November of 1996 in Inchon harbour in Korea and VLCC of LNG of G/T 100,000 ton class have been entering into the base ever since. This study was started and completed In comply with the requisition of the Sea Pilot Association of Inchon harbour in advance of the opening of the LNG base. As the entrance and exit channels leading to Inchon harbour were constructed in the years of 1930s, it was one of the most pressing works for Inchon sea pilots in 1996 to certify the method of safe passing maneuvering of a G/T 100,000 ton of LNG tanker through the Pudo narrow channel prior to commencing actual piloting of the VLCC of LNG. The authors made some mathematical models computing maneuvering of a vessel changing her course with her control surface through a narrow channel and computed maneuvering of a G/T 100,000 ton of LNG tanker and also made maneuvering simulations of the vessel by a desk-top simulator. The results of computations and simulations are well coincided with each other in qualitative aspects to assure safe passing of the VLCC of LNG.
9.
2000.12
서비스 종료(열람 제한)
This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).
10.
2000.12
서비스 종료(열람 제한)
Before some experiments were carried out with analog bandpass filter which used for filtering the noise included in sound source signal. And this filter was constituted by condenser, register and operational amplifier. Hut these elements made the phase characteristics to differentiate in each sensing channel and cause a little of measurement error. We made new measurement system that was substituted digital filter for the analog filter in order to develop the optimal system which could find the time delay between each sensors with high accuracy. This paper describes the new system's constitution and the function of each parts. Specially three digital filters were designed and applied to the digital signal processing Part. And a series of experiments were carried out with the source＇s distance 9.53meters and the random bearing interval within the limits of 0˚ ~ 180˚. As a result, we have recognized that the accuracy of measurements were differentiated by the methods what kind of digital filter were adopted. And we have confirmed the facts that IIR LPF was suitable for sound source's bearing measurement and FIR LPF reduced the range measurement error.
