In this paper new enhanced post-process predicting the speaker's intention was suggested to implement the real-time control module for ship's autopilot using speech recognition algorithm. The parameter was developed to predict the likeliest wheel order based on the previous order and expected to increase the recognition rate more than pre-recognition process depending on the universal speech recognition algorithms. The values of parameter were assessed by five certified deck officers being good at conning vessel. And the entire wheel order recognition process were programmed to TMS320C5416 DSP so that the system could recognize the speaker's orders and control the autopilot in real-time. We conducted some experiments to verify the usefulness of suggested module. As a result, we have confirmed that the post-recognition process module could make good enough accuracy in recognition capabilities to realize the autopilot being operated by the speech recognition system.
Shipwaves can have harmful effects on people who are using riverside and cause bank erosion, bank structures destruction in restricted waterways. The wave field near a vessel is consisted of a combination of a primary and secondary wave system in a shallow or restricted waterway. The water level depression(squat) and return current beside the hull are called the primary wave system. The secondary wave system, that is the wave height originates from a local disturbance point such as the bow of the ship. This study aims at investigating the characteristics of the wave field around a vessel in a restricted water in relation to navigation experimentally and theoretically. The return current and squat with a correction factor can be newly evaluated and the almost same high-sized wave heights take place on the whole waterway in a restricted water without regard to the distance from the sailing line.
The various properties such as the electric current distribution, resonant frequency and radiation patterns of open-ended meander slot antenna placed on a small ground plane, are investigated to give the help in performing antenna design. Based upon these characteristics, the designed antenna which is only 22mm(0.06λg) in height and 31mm(0.09λg) in width can operate at the 433 MHz with the measured radiation efficiency of 8% and end-fire radiation pattern. These properties make the antenna suitable for the handheld device such as the wireless remote controller.
In this paper, we developed a Smart Heat Radiating Sheet(SHRS) having the absorption ability of more than 15 dB, and thermal conduction rate more than 20 W/mk for port logistics RFID(Radio Frequency IDentification) system by using AMP(Amorphous Metal Powder) and shielding sheet. Firstly, the EM(Electro_Magnetic) wave absorber samples were fabricated by using AMP and CPE (Chlorinated Polyethylene) with different composition ratios of 80 : 20 wt.% and 85 : 15 wt.%, respectively. Secondly, we fabricated the Smart Heat Radiating Sheet using the shielding sheet to attach EM Wave Absorber. As a result, the Smart Heat Radiating Sheet with absorption ability of 16 dB at 433 MHz and thermal conduction rate is 24 W/mk has been developed with the composition ratio of Amorphous Metal Powder : CPE = 85 : 15 wt.% and thickness of 5.5 mm.
It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.
Globalization of production, changing technology in ocean shipping sector, shifting bargaining power from port service provider to port users, changing distribution patterns of the containerization and new implementation for the environment and safety concerns introduced new ways of administration in port sector. In these days, port industries cannot survive alone. Port operation and management has to be proactive to cooperate and integrate with other port operators or other industries. In the 21st century, cooperation in maritime sector is more common than that in the past with several different reasons in a mixture of forms of cooperation. Cooperation among port authorities, port operators, shipping line, inland transport service providers and/or related organizations themselves becomes to exist to overcome the challenges and development of the global transport chain. This paper investigates the concept of port cooperation and the case analysis of the cooperation in the port industry.
Terminal market has rapidly crashed and market rates have taken a sharp plunge. The substantial throughput decrease resulted from the world economic downturn has been a finishing blow to the terminal operators in Busan. Every terminal operator is taking cost saving as its first priority and accelerating structural reform and downsizing. Under the desperate situation, the need of effective cost analysis would be highly required to effectively control operation cost and to develop new services to satisfy the different needs of the customers. Furthermore, terminal operators could reduce unnecessary activities and concentrate their resource on the more cost-effective process through the operation cost analysis. In order to suggest a new framework of the cost control of container terminals, this paper seeks to analyze terminal costs based on ABC approach by processing actual data.
An environment of world marine port today is rapidly changing. Importance of a hub port is being maximized along with appearance of a large container ship, and Busan port is also growing with the goal as a hub port of Northeast Asia. Busan port currently has competitive power as the 5th top port in the world, but increase rate of transportation quantity, is low compared to Shanghai port in China and other ports in Northeast Asia. For a port to obtain competitiveness, investment on infrastructures of a port is necessary and also it has close relation with an intraregional port logistics industry. However, a port logistics industry in Busan area has a hard time avoiding a small size due to the government support on major companies. Therefore, this study will analyze difficulties of small port logistics companies and the related companies as to vitalize port logistics industry in Busan area in hopes to help vitalizing regional economy.
In this paper, practical problems for current feeder service between Busan port and west coast of Japan were extracted through in depth interviews with Japanese feeder vessel companies, shippers, and port authority based upon which major criteria (elements) for improvement of the feeder network are structured in hierarchic order and weighed relative importance through AHP method. From the questionnaire answered by Korean and Japanese port users and experts the weights of criteria were calculated and the shipping service was ranked the first by both parties with 0.235 and 0.217, respectively. The port service and support system ranked the second and the third, whereas the port marketing was shown to be the lowest of all. Considering the overall weights, the increase in a port loading and unloading speed of port service was followed by provision of dedicated deck for feeder vessel of port facilities for Korean respondents. Therefore, speed up of the port operations and providing docks for feeder vessel are to be firstly provided for more efficient feeder operations, which would be the basis for the construction of optimal transportation network.