간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제17권 제4호 (2015년 12월) 41건
21.
2015.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to investigate radiation dose sensitivity due to displacement of human extremities in the water bolus box on radiation therapy. Water bolus box and human thigh with femur bone were constructed in computerized radiation therapy planning system to verify the absorbed dose. Two 6MV X-ray beams were irradiated bilaterally into water bolus box and then radiation dose were calculated each situation at displacement of middle axis of thigh from the center in water bolus box to right and left direction. Absorbed dose of thigh and femur bone increased by the distance of displacement. The maximum dose of thigh even increased 20% over than prescribed dose. This is in contrast to conventional concept of dose distribution in water bolus box. Based on this result, displacement of body site in the water bolus box have to be averted during radiation therapy.
4,000원
22.
2015.12
구독 인증기관 무료, 개인회원 유료
When performing Chest x-ray examination to pregnant woman, normally we shield back side of abdomen. In this situation, scattered rays made by equipment and surrounding structure can enter front side of abdomen. Therefore, in this study, we evaluate suitability of abdomen shield especially to pregnant woman. In case of One shielding material placed back of abdomen, the measured value is 0.676±0.19 uSv/hr. Two shielding material is 0.764±0.04 uSv/hr. Three is 0.685±0.16 uSv/hr. The exposure dose inferred in this study does not excess annual effective dose limit. But It is not mean absolute safety. So we have to minimize occurrence of stochastic effect of radiosensitivity by shielding front side of abdomen of pregnant woman in clinic.
4,000원
23.
2015.12
구독 인증기관 무료, 개인회원 유료
The aim of this study was to set up the optimal exposure condition according to detector type considering image quality (IQ) with radiation dose in chest digital radiography. We used three detector type such as flat-panel detector (FP) and computed radiography (CR), and charge-coupled device (CCD). Entrance surface dose (ESD) was measured at each exposure condition combined tube voltage with tube current using dosimeter, after attaching on human phantom, it was repeated 3 times. Phantom images were evaluated independently by three chest radiologists after blinding image informations. Standard exposure condition using each institution was 117 kVp-AEC at FP and 117 kVp-8 mAs at CR, and 117 kVp-8 mAs at CCD. Statistical analysis was performed by One way ANOVA (Dunnett T3 test) using SPSS ver. 19.0. In FP, IQ scores were not significant difference between 102 kVp-4 mAs and 117 kVp-AEC (28.4 vs. 31.1, p=1.000), even though ESD was decreased up to 50% (62.3 μGy vs. 125.1 μGy). In CR, ESD was greatly decreased from 117 kVp-8 mAs to 90 kVp-8 mAs without significant difference of IQ score (p=1.000, 24.6 vs. 19.5). In CCD, IQ score of 117 kVp-8 mAs was similar with 109 kVp-8 mAs (29.6 vs. 29.0), with decreasing from 320.8 μGy to 284.7 μGy (about 11%). We conclude that optimal x-ray exposure condition for chest digital radiography is 102 kVp-4 mAs in FP and 90 kVp-8 mAs in CR, and 109 kVp-8 mAs in CCD.
4,000원
24.
2015.12
구독 인증기관 무료, 개인회원 유료
In this study, We designed and implemented a assistant device for the standing X-ray views which is the one of the clinical X-ray imaging position. To evaluate the usability of the proposed assistant device, We choose 11 clinical patient postures that are used frequently and applied the postures to 5 volunteers. 11 images was taken from a volunteer for the patient postures. And we conducted a survey on safety and clinical usefulness, the 5 volunteers responded to the safety and 5 experts responded to the clinical usefulness. The survey results show that the volunteers feel more safe and the obtained images are very clear and clinically useful. The result for the image quality is 4.69 of 5(best) and safety is 2.84 of 3(best). It will be very profitable to both patients and hospitals by using the proposed assistant device.
4,000원
25.
2015.12
구독 인증기관 무료, 개인회원 유료
In this study, to find out the effect of psychological anxiety of the patients during MRI examination on the claustrophobia and vital signs, As for a study tool, to measure Anxiety Sensitivity Index(ASI), Kamsung Evaluation Index of Life Environmental Noise(KEI), Diagnostic and Statistical Manual of Mental Disorders(DSM-IV) was used, and for vital signs, blood pressure and pulse rate were measured pre and post MRI examination. In conclusion, it was indicated that though the effect of the general characteristics, psychological anxiety, on noise sensitivity and claustrophobia was small, the psychological anxiety of the patients during MRI examination affected claustrophobia and vital signs.
4,000원
26.
2015.12
구독 인증기관 무료, 개인회원 유료
Generally a patient who was injected radiopharmaceuticals for nuclear medicine examination is not an object of isolation. Therefore, when the patient uses toilet, we expect surface contamination of a toilet by radioisotope. The measured value is 25.69Bq/cm2(a restroom near admission and administration), 19.39Bq/cm2(a toilet near department of radiology). The study shows that 9 of 24 locations in controlled area exceed over surface contamination limit. From now on, we should find source of contamination through measurement radioactive nuclide to apply radiation safety management.
4,000원
27.
2015.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to let the entire logistics system be managed in cyberspace by effectively sharing the logistics information between companies involved in the process, changing conventional commerce to electronic commerce. Most of the goods traded through electronic commerce are small goods involving small business transactions. This produces many problems in shipping and delivery and the leads an inefficient logistics system. Another problems is that there is no sharing of information that process the logistics flow and no systematic management of pick-up and delivery information. As a result, rise in logistics cost, longer delivery period and poor service quality are inevitable and these results are becoming an obstacle in the widespread usage of the electronic commerce. Companies that are part of logistics center can cooperate logistics business in Cyber space and share the entire logistics information through the cyber logistics center. This turns out in effective sharing of logistics information, and thus, allows efficient management of logistics, improves logistics service, and reduces logistics cost.
4,300원
28.
2015.12
구독 인증기관 무료, 개인회원 유료
CIS nations are recognized as an emerging market recently because there are abundant natural resources and a lot of investment demand. Furthermore, they are located in the middle of Europe and Asia and that make them have more strategic importance as a logistics hub. So many global companies including domestic ones began to advance into the on-site. and this tendency will be strong. On the contrary, a research in logistics environment of CIS has rarely been done. This paper provides a way of systematic approach to design logistics network in CIS with real business case and shows the analyzed result of optimization simulation that includes factors having a huge influence on the overall logistics cost.
4,800원
29.
2015.12
구독 인증기관 무료, 개인회원 유료
Global interests in RFID are increased and Korean government and companies make an active effort to propagate and spread RFID. Due to the overwhelming advantages of RFID system in comparison with existing bar code system, ripple effects on logistics sector among the utilizing fields of RFID technology are expected to be great, but application of RFID system is lowly progressed unlike the expectation of several experts. Therefore, this research extracts precedent studies on theoretical background, applying fields, promotion condition and domestic/foreign parts of RFID system, factors for operating domestic RFID system and effects and considers the effects of RFID's external variables on easiness and effectiveness of TAM. It confirms the relations of RFID applying effects for companies applying and utilizing RFID and verifies the relations among the effects for application of RFID system, accepting intention of RFID system and applying effects. Based on the results of analysis, it should play a role of good guide for all of companies and institution who will introduce RFID system to all of Korean logistics fields, make policies and systems which promote RFID acceptance nationally and socially and play a role of guide making confident climate for RFID technolog
4,300원
30.
2015.12
구독 인증기관 무료, 개인회원 유료
modern logistics are required to carry out functions such as timely adjustment and swift adaptation to changing patterns, and this leads to the emphasis on forming logistics parks. Logistics parks make profits using the efficiency of time and space. Such logistics parks play an important role in a corporation creating operating profits as well as acting as a method of alternative investment for individuals. Logistics parks no longer simply store materials, but have become a place that plays an important role in various areas of corporate and individual activities, and thus the analysis of the selection of the location of logistics parks and the related characteristics is extremely important. There are many existing studies on the selection of locations of logistics parks but work on the factors related to location selection by industry seem lacking. As such, in the course of this study we have used preceeding studies to draft a questionnaire on which selection factors affect the selection of logistics park location in different industries and conducted empirical analysis of the questionnaire results to uncover the factors that affect the selection of the locations of logistics parks in different industries.
4,000원
31.
2015.12
구독 인증기관 무료, 개인회원 유료
This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user’s terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor’s node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator’s terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user’s terminal. Seventh, user’s terminal is that it receives each location’s default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location’s gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location’s information quickly.
4,000원
32.
2015.12
구독 인증기관 무료, 개인회원 유료
Among recent management innovation activities of hotel, one of the most important competitive advantage through customer satisfaction, and to which members of the organization's service orientation is essential. The hotel's service orientation is closely related to the organization's culture. In this study, the organization's service-oriented culture, the internal service quality, emotional commitment and continued commitment and ultimately affects the employee's influence on customer orientation will look at that. Results and implications of this study can be summarized as follows. the internal service quality among the factors corporeality, responsiveness and assurance, empathy, job satisfaction showed a significant influence on the type of empathy and emotional commitment castle had a significant impact on. With these results, relationships with colleagues within the organization, such as work environment and job satisfaction and emotional commitment, the atmosphere is very important to know that you can affect. Therefore, the members of the hotel to increase customer satisfaction and organizational commitment, corporate culture, business as well as collaboration with colleagues to share the emotional atmosphere of sympathy for the business environment will get improved.
4,800원
33.
2015.12
구독 인증기관 무료, 개인회원 유료
This study empirically analyzed the influence of media on a visitor's satisfaction and re-visit by setting up 5 sorts of exhibition media as text, docent, virtual museum, website and Smartphone App based on practical exchange and communication between a visitor and an exhibition provider. The research results are as follows: First, all these 5 sorts of media suggested by this study were found to be able to have an influence on a visitor's satisfaction and re-visit. Second, it was found that the factors preferentially affecting a visitor's satisfaction and re-visit were 'Docent' and 'Website' factors. Accordingly, it is judged that it's necessary to more preferentially consider 'Docent' and 'Website' factors than the other factors in order to increase a visitor's satisfaction and re-visit. Third, it's possible to interpret that the bigger a visitor's satisfaction, the higher a visitor's intention to re-visit through the verification that a visitor's satisfaction will have a significant influence on a visitor's re-visit. The implication of this study lies in the fact that this study attempted at an integrated approach by analyzing the relative size of the influence through across-the-board suggestion of influential factors on a museum visitor's satisfaction and re-visit.
4,500원
34.
2015.12
구독 인증기관 무료, 개인회원 유료
The increasing interests on patents have led many individuals and companies to apply for many patents in various areas. Applied patents are stored in the forms of electronic documents. The search and categorization for these documents are issues of major fields in data mining. Especially, the keyword extraction by which we retrieve the representative keywords is important. Most of techniques for it is based on vector space model. But this model is simply based on frequency of terms in documents, gives them weights based on their frequency and selects the keywords according to the order of weights. However, this model has the limit that it cannot reflect the relations between keywords. This paper proposes the advanced way to extract the more representative keywords by overcoming this limit. In this way, the proposed model firstly prepares the candidate set using the vector model, then makes the graph which represents the relation in the pair of candidate keywords in the set and selects the keywords based on this relationship graph.
4,000원
35.
2015.12
구독 인증기관 무료, 개인회원 유료
This study analyzes the business performance of research and development(R&D) and especially studies the effect of technology management activity and technology innovation competency on commercialization performance. According to previous studies, the technology management activity can be composed of technological innovativeness, analysis of market, R&D method, and appropriateness for commercialization plan. Also, the technology innovation can be divided into patent, R&D manpower, R&D investment ratio, production capability, and marketing capability. On the result of the analysis, all the components of technology management activity are positively related with commercialization performance. In case of technology innovation competency, however, only production and marketing capabilities have influence on the business performance. Especially, marketing capability controls the effect of technology management activities on the commercialization performance. Consequently, technology management is very important activity for SMEs to succeed commercialization and SMEs should collaborate with production and marketing departments from the early stage of R&D.
4,000원
36.
2015.12
구독 인증기관 무료, 개인회원 유료
In unlimited competitive period changed every time, domestic manufacturing industry feels a crisis between China and Japan, who are leaping to manufacturing strong countries with worldwide manufacturing factories. In this situation, many companies make an effort to learn and introduce Toyota production method drawing innovation of production method and reduction of many costs for high quality, but most of cases were failed. The reason for the failure should be that correct understanding and application of TPS corporate culture were insufficient and job attitude was not considered when applying Toyota production system. Therefore, the purposes of this thesis are to arrange major contents based on relative documents of precedent researchers, conduct a survey for employees of middle and small scaled manufacturers who introduced Toyota production system, analyze changes of enterprises' job attitude by introduction of TPS corporate culture and the effects on company's management results through the various analyses for grasping relationship among TPS corporate culture, job attitude and management results, introduce Toyota production system more effectively and suggest measures to maximize company's long-term management results.
4,200원
37.
2015.12
구독 인증기관 무료, 개인회원 유료
This paper reviews the one of problems that may occure for the tram operating in Korea, it's a free-riding problem, I analyzed the feasibility of combining the introduction of world-class technology solution "IT". It is under review the introduction of tram in Su-won city, Chang-won city, Wi-Rye new town. Free-riding is one of the biggest issues of any agency that operates the public transportation system. It has been acting as the main factors threatening the financial integrity of the operating agency, and the ratio of free-riding is further increased. In this paper, I want to build a foundation for the development of the system by analyzing the economic feasibility for the introduction of free-riding prevention system.
4,000원
38.
2015.12
구독 인증기관 무료, 개인회원 유료
Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.
4,000원
39.
2015.12
구독 인증기관 무료, 개인회원 유료
The study proposes multiple TRIZ contradiction solution strategies for addressing PC (Physical Contradiction) and TC (Technical Contradiction) by implementing TRIZ cause-and-effect tree. The problem associated with TC of the ends is solved by PC of means which employs a causal relationship between causes and effects. The TRIZ contradiction solution strategies demonstrated in this research are classified into 3 types of combined strategy as follows: 1. To-Be PC and AS-Is PC, 2.To-Be PC and As-Is TC, 3.As-Is PC and To-Be TC. The combined strategy of To-Be PC and As-Is PC is similar to a divide-and-conquer technique. This strategy adopts parallel strategies using 4 separation principles in time, in space, between parts and the whole, and upon condition of two reversed-PCs. Moreover, its application elucidates the conflict relationship of two TCs from the study. The integrated 4 separation principles and 40 inventive principles present an effective synergy effect from the combination, and further addresses the problems in the TRIZ contradiction resolution strategies. Combined strategy of To-Be PC and As-Is TC implements the 40 inventive principles that To-Be PC of the means resolves the As-Is TC of the ends. Combined strategy of As-Is PC and To-Be TC also uses inventive principles to the As-Is PC of the means to solve the To-Be TC of the ends. In addition, propositional and logical relationship of necessary and sufficient conditions between TC and PC is used to support the validity of 3 TRIZ contradiction solution strategies. In addition, 3 other strategies of necessary and sufficient conditions validate the contraposition relationship of the truth table. This study discusses TRIZ case studies from National Quality Circle Contest from the years between 2011 and 2014 to provide the usage guidelines of TRIZ contradiction solutions for quality purposes. Examining analysis from the case studies and investigating combined strategies allows the users to obtain comprehensive understanding.
4,900원
40.
2015.12
구독 인증기관 무료, 개인회원 유료
In this study, analysed the characteristics of power drop and surface damage in solar cell through high temperature and humidity test in the 3 case of EVA(ethylene vinyl acetate) and 2 case ribbon thickness. The solar cells were tested during the 500hr in 85℃ temperature and 85% relative humidity conditions, that excerpted standard of PV Module(KS C IEC-61215). Through the EL(Electroluminescence) shots, specimen's surface have partialy damaged. Before and after high humidity and high temperature test, ribbon thickness 200㎛ EVA1 case power drop rate was 8.463%, EVA2 case was 6.667%, EVA3 case was 6.373%. In the ribbon thickness 250㎛ EVA1 case power drop rate was 6.521%, EVA2 case was 8.517%, EVA3 case was 6.019%. EVA3 case was the lowest power and FF(fill factor) drop rate at the 2 case of ribbon thickness, because EVA3 is laerger than EVA1 and EVA2 in thickness, elongation and tensile strength.
4,000원
