간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제19권 제4호 (2017년 12월) 32건
1.
2017.12
구독 인증기관 무료, 개인회원 유료
In recent years after the Sewol Sank, the surroundings of Fire have rapidly changed and citizens need for Fire have been demanding very high. Under these situations, in order for satisfaction to all these demands, Seoul Metropolitan Fire & Disaster Headquarters(SMFDH) have made improvements of Golden Time in the field of disaster as the leader of Fire Department in Korea. SMFDH has been practicing many kinds of plans, or projects to achieve Gold Time of 55 types of disaster. However, There have been questioning about all these projects if they are working for the achievement. The purpose of this study is to scrutinize current projects for Golden Time Targeting focused on Mapo fire fighters as first responders and to cope with how to make them better for Seoul Citizens’ safety by using SPSS(Statistical Package for the Social Science) Statistics 24. The result of this study presents that how we can find to be all the project for Golden Time Targeting running well. And This study will be positively applied to Seoul fire policies or helped for setting them up better.
4,000원
2.
2017.12
구독 인증기관 무료, 개인회원 유료
This study attempted to establish fire risk factors and preventive measures for each of five major types of construction, focusing on construction sites. For this purpose, disaster cases were analyzed and countermeasures were prepared. In addition, fire risk factors and flammable and combustible materials by construction type according to construction process were identified and preventive measures thereof were suggested. The results of this study can be used to establish policy improvement directions that meet various educational needs and expectations by identifying the use status of flammable and combustible materials and figuring out the fire risk factors according to the process by work type in construction sites.
4,600원
3.
2017.12
구독 인증기관 무료, 개인회원 유료
Offshore plants should be managed at a high level of safety condition. Because the offshore plant has cramped space and has difficult access when a fire occurred, a fire can be critical to the plants. LED lighting can reduce the risk of fire by its lower energy consume suitable to intrinsic safety and lower heat radiation that can reduce the possibility of ignition. Also LED has a long lifetime. Though LED luminaire has various advantages for offshore plants, an international standard for the luminaire has not provided because it is new technology. Because there is no international and domestic standard specially provided for the LED luminaire, a guideline is required for developing the LED light and for the future establishment of an international standard. This study was conducted to develop the guideline for LED luminaire for offshore plants. Firstly, relevant standards were analyzed for the guideline. Then we found that there are editorial differences between international standards and domestic standards. So the guideline was developed based on international version and the differences between the domestic and international standard were provided to let Korean developers recognize the differences.
4,000원
4.
2017.12
구독 인증기관 무료, 개인회원 유료
A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water or other reasons in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of plating bath and most of raw materials in the bath have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, in previous study, we tried to monitor and notice the dangerous change of temperature of water immediately to prevent the risk of fire from plating process. However, unfortunately previous studies were not able to shut out the fundamental cause of fire since bath temperature sensor can detect air temperature when the level sensor was malfunctioned. In this paper we developed the Teflon heater which contains a built in temperature sensor and improved plating equipment system. Teflon heater is improved using Pt 100Ω sensor which can detect until 600°C . When the bath temperature sensor detects over 60°C or the Teflon heater sensor detects over 240°C they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of 240°C by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.
4,000원
5.
2017.12
구독 인증기관·개인회원 무료
The purposes of this study are to analyze risks of construction step BIM(Building Information Modeling) applied project and improve it. Recently, construction industry has emphasized an importance of BIM for efficient utilization of various information. In the whole life cycle of huge construction project, there are cases introducing BIM and projects applying BIM are gradually increased to the work of construction step. However, the process of communication is not established, so the contents of BIM process of construction step are just showing rough fields and concepts of working utilization, so it's restrictive to utilize BIM actively on constructions step. Through results of case study in this research, constructor risks of BIM business should be efficiently treated with Fuzzy-FMEA that is more precise than existing danger evaluation.
6.
2017.12
구독 인증기관 무료, 개인회원 유료
Abstract It has come to attention that a risk-assessing organization, that will benchmark a company’s safety department, is imperative, following an increase in large-scale SOC-business project, construction of higher-raised buildings, development of underground space; all that have increase accident rates. Having faced problems that arise in firms that demand diversity, complexity and instantaneity, the purpose of the thesis is to arrive at efficient and practical problem-solving means. In order to solve the problems that would surface theoretically during an actual risk assessment, the state of the operation systems of the top five national construction firms having a hazard rate of 0.25 times less than the average rate have been analyzed, while a hierarchal recognition research of the employees who not only function at the operating level but are the practice subjects of a firm, has also been conducted, bringing the main text.
4,000원
7.
2017.12
구독 인증기관 무료, 개인회원 유료
This thesis provides background information on DFS carried out by the government in an effort to reduce the accident rate, cases of DFS in other advanced countries to study their risk detection, risk assessment, risk control measures, and cases in which application of DFS during the designing phase succesfully led to reduction of the accident rate. Till now, the focus has been on incident responses after the occurance of accidents, it describes the importance of considering safety during the desining process through safety results and cases.
4,600원
8.
2017.12
구독 인증기관 무료, 개인회원 유료
As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers ' replacement due to accidents caused by industrial accidents or accidents.
4,000원
9.
2017.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released ‘major diaster cases in construction business’from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.
4,000원
10.
2017.12
구독 인증기관 무료, 개인회원 유료
Among the industrial disasters caused by drop, ladder related drop disasters are occurred the mostly. The victims are occurred continuously. This study analyzed current situation of industrial disasters for recent 10 years(2005~2014) and compared・analyzed statistics of death disasters of ladder by workplace scale, age, occupation, employment type, working content, scarred area, etc. in detail. This study suggested direction of safety standard modification for ladder that is an original cause material of many drops, direction of safety training strengthening of small-scaled workplace, and safety model based on disaster statistics and should contribute to reduction of disaster rate for ladder working.
4,000원
11.
2017.12
구독 인증기관 무료, 개인회원 유료
This study highlights the theme of safety leadership in railway organization, conducting empirical analysis on the relationship between safety climates, safety leadership, safety behavior, and accident. The empirical test results based on questionnaires received from 223 train drivers working at A subway firm indicated that relationship between CEO's safety philosophy, and safety communication showed a significant positive effect on boss's safety leadership. And boss's safety leadership showed a positive influence on observation belonging to safety behavior, which in turn showed a significant negative relationship with mistake. However, mistake, observation and violation were shown that there are no relationship with accidents.
4,000원
12.
2017.12
구독 인증기관 무료, 개인회원 유료
Recently there is a growing interest in the airborne spread of virus. In particular, there is growing interest in secondary infection through the air in the hospital. The distribution of air-born virus depends on ventilation system installed in a hospital. In this study, simulations were carried out to predict the move of air-born virus by ventilation system at hospital. Simulation results showed that pressure distribution was –372.05Pa ∼ -3.45 Pa at 1st floor incase of only used mechanical exhaust at bathroom, shower stall , storage, kitchen etc.. if ventilation switch from used mechanical exhaust to mechanical exhaust & mechanical supply. Simulation results showed that pressure distribution was -336.44Pa at stair hall < -0.2Pa at bathroom < mean 1.19Pa at other room. So simulation results showed that using all of the mechanical supply and mechanical exhaust was more effective then the mechanical exhaust for maintain the pressure distribution in hospital. It was also showed that when using the mechanical supply and mechanical exhaust more effectively prevention of air born virus diffusion.
4,000원
13.
2017.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to assess the correlation between attitude of Patient Safety Management(PSM) and practice of PSM and clinical practice satisfaction of nursing students, also identified how these factors attitude and practice of PSM influence on clinical practice satisfaction, eventually aimed to develop education programs to strengthen practice of PSM in nursing students. A descriptive design was used in the study. The multiple regression was used for the study to prove the factors how the attitude and practice of PSM were affected to the clinical practice satisfaction. The study subjects were 226 nursing students. The results show that attitude of PSM mean was 3.71, practice of PSM mean 3.97, the clinical practice satisfaction mean 3.31. Among the general characteristics, clinical practice satisfaction showed significant differences in satisfaction of major(F=5.10, p=.001), the existence of role model(t=2.64, p=.009). Significant positive correlation was found between attitude of PSM, practice of PSM and the clinical practice satisfaction. Practice of PSM(β=.39) was shown as the most important factor to affect on the Satisfaction on clinical practice, also the explanation power of value for this study was found 41.1%. Consequently, this study indicates to develop the education program to strengthen practice of PSM. Also process the additional study for the nursing students in other areas.
4,000원
14.
2017.12
구독 인증기관 무료, 개인회원 유료
The Ministry of Science, ICT and Future Planning made law for Pre-Hazard Risk Analysis in December 31, 2014 to protect researchers from continuing accidents in laboratory. Conducted before an experiment, Pre-Hazard Risk Analysis finds hazards of the experiment and rules to manage the hazards.So the Pre-Hazard Risk Analysis can support laboratory safety system by prevent accidents in laboratory. Pre-Hazards Risk Analysis is newly created system so that executors need Guidelines to perform this analysis properly. This study is to develop guide tool for Pre-Hazard Risk Analysis by analyzing other risk assessment systems; PSM, Off-site Consequence Assessment, laboratory safety system. Also, this study suggested how to establish database for Pre-Hazard Risk Assessment by analyse KRAS.
4,000원
15.
2017.12
구독 인증기관 무료, 개인회원 유료
This researcher selected basic variable to investigate the effective relations of establishment and management of resting facility on reduction of constructional disasters and safety accidents and improvement of working efficiency for construction workers. Based on the measured variables, this researcher investigated phenomenon, recognition and satisfaction for using and demanding resting facility by long-term construction in construction site for workers of huge construction site in Seoul, conducted survey of total 219 questionnaires so as to grasp implications of workers' resting facility demanded in long-term huge construction site and effects on reduction of disasters and conducted structural equation analysis. As a result, resting faciity factor, management factor, and hygienic service factor were significant and resting and food factors were not significant. Therefore, it's expected to reduce personal disaster by improving quality of constructional resting facility, hygienic service, and resting facility management and especially, resting facility management factor makes lots of effects on prevention of personal disasters, so it was a strongly main factor. By suggesting the guideline of establishment and management service of proper resting facility through this research, positive recognition and constructional disaster reduction can be expected in construction site.
4,000원
16.
2017.12
구독 인증기관 무료, 개인회원 유료
This study is analyzed combustion phenomena based on the environmental energy facility incinerator. It is assumed that combustible components of waste are composed of carbon and hydrogen, and the combustion process of fuel is by setting as multi-component / multistage reaction. As the combustion chamber is burned, the high temperature environment is achieved, also the heat transfer accompanied by the turbulent flow and the generation of NOx, a pollutant, are interpreted to predict the thermal and fluid characteristics and pollution emissions of the grate incinerator. As the result of internal flow analysis, the slow flow around the ash chute and the mixing effect due to the complicated turbulence around the combustion chamber were predicted to show excellent performance. It is shown to the internal average temperature was about 1024°C, around the about 1000°C homogeneous temperature distribution. Due to the sudden temperature decrease in the boiler, the flue gas temperature at the outlet was estimated to be about 220 ℃.
4,000원
17.
2017.12
구독 인증기관 무료, 개인회원 유료
Solar energy has been known as a successful alternative energy source, however it requires a large area to build power generation facilities compared to other energy sources such as nuclear power. Weather factors such as rainy weather or night time impact on solar power generation because of lack of insolation and sunshine. In addition, solar power generation is vulnerable to external elements such as changes in temperature and fine dust. There are four seasons in the Republic of Korea hereby variations of temperature, insolation and sunshine are broad. Currently factors that cause find dust are continuously flowing in to Korea from abroad. In order to build a solar power plant, a large area is required for a limited domestic land hereby selecting the optimal location for the plant that maximizes the efficiency of power generation is necessary. Therefore, this research analyze the optimal site for solar power generation plant by implementing analytic hierarchy process based on weather factors such as fine dust. In order to extract weather factors that impact on solar power generation, this work conducts a case study which includes a correlation analysis between weather information and power generation.
4,200원
18.
2017.12
구독 인증기관 무료, 개인회원 유료
Predicting a box office gross in the film industry is an important goal. Many works have analyzed the elements of a film making. Previous studies have suggested several methods for predicting box office such as a model for distinguishing people's reactions by using a sentiment analysis, a study on the period of influence of word-of-mouth effect through SNS. These works discover that a word of mouth (WOM) effect through SNS influences customers’ choice of movies. Therefore, this study analyzes correlations between a box office gross and a ratio of people reaction to a certain movie by extracting their feedback on the film from before and after of the film opening. In this work, people’s reactions to the movie are categorized into positive, neutral, and negative opinions by employing sentiment analysis. In order to proceed the research analyses in this work, North American tweets are collected between March 2011 and August 2012. There is no correlation for each analysis that has been conducted in this work, hereby rate of tweets before and after opening of movies does not have relationship between a box office gross.
4,600원
19.
2017.12
구독 인증기관 무료, 개인회원 유료
Block Chain is a technology that records and shares distributed ledgers without a central authority, providing a decentralized platform for transparent transactions in the business and enhancing transparency and traceability in all transactions to ensure trust in the transaction. Despite initial doubts about this technology, it is committed to adopting, adapting and improving the technology in a wide range of industries, including finance, government, security, logistics, food, medical, legal, and real estate. This study examines this technology, its applicability and potential benefits to the manufacturing supply chain. A tracking system of manufacturing supply chain to visualize transparency and traceability is implemented, and the conditions for adopting the technology in the manufacturing supply chain and the issues to be addressed are discussed.
4,000원
20.
2017.12
구독 인증기관 무료, 개인회원 유료
This study is for figuring out major components of construction quality infrastructure and suggesting improvement plan by benchmarking global best practice model and analyzing gap between the model and sample practice. Based on improvement plan, researcher could derive major characters and components of construction quality infrastructure, and also about the priority among core competency components of construction quality experts. The result showed that the 'human resource' was ranked the best priority followed by 'method' 'environment', 'equipment' among major characters and components of construction quality infrastructure. Also, for core competency components of construction quality experts, 'number of years in work places' was the best priority, and the 'professional knowledge on engineering' was another priority ranked. Far from general perception on competency components, 'academic education' ranked the last. It may allude that the current education system in this country is not effective in developing competency of quality engineers. In summary, this study shows professionalism of quality engineer is the most important thing in all the components.
5,500원
1
2
